Physics
27 chapters · 846 practice questions with full solutions — all free.
Reviewed by Kaustav Basak (19 years teaching)Written with AI help
How it's tested: in NEET UG 2026 Single paper (NEET UG 2026), the Physics section has 45 questions for 180 marks. Syllabus & exam pattern →
Full Physics section test
40 questions across the whole section · 40 min · one timed test
Kinematics
Kinematics covers motion in a straight line and in a plane: displacement, velocity, acceleration, the equations of uniformly accelerated motion, motion graphs, vectors, relative velocity, projectile motion and uniform circular motion. NEET tests it through short numericals on the equations of motion, projectile formulas and relative velocity, plus conceptual items on graphs and the vector nature of these quantities.
Exam tip: Fix a positive direction first and attach a sign to every displacement, velocity and acceleration before substituting into the equations of motion.
40 questionsPractice testLaws of Motion
Laws of Motion covers Newton's three laws, momentum and impulse, conservation of linear momentum, equilibrium of concurrent forces, friction, connected bodies and the dynamics of circular motion. NEET asks quick numericals built on free-body diagrams and F = ma: impulse, recoil and explosions, friction on level and inclined surfaces, apparent weight in lifts and vehicles on curved roads.
Exam tip: Draw a free-body diagram for each body, write ΣF = ma along the direction of motion, and compare with limiting friction before assuming that a body moves.
40 questionsPractice testThermodynamics
Thermodynamics covers thermal equilibrium and the zeroth law, internal energy, heat and work, the first law, specific heats of gases, thermodynamic processes (isothermal, adiabatic, isobaric, isochoric, cyclic) and the second law with heat engines, refrigerators and the Carnot engine. NEET mixes formula numericals (work, ΔU, efficiency, COP, adiabatic relations) with statement and assertion–reason items on processes and laws.
Exam tip: For any process question, first write Q, W and ΔU for that process side by side; most wrong options can then be eliminated in seconds.
40 questionsPractice testWork, Energy and Power
Work, Energy and Power covers work done by constant and variable forces, kinetic and potential energy, the work–energy theorem, conservative forces, spring potential energy, power, and collisions in one dimension. NEET tests it with numericals on the work–energy theorem, springs, power on inclines, motion in a vertical circle and elastic or inelastic collisions.
Exam tip: When forces, distances and speeds are given but time is not, go straight to the work–energy theorem instead of the equations of motion.
40 questionsPractice testRay Optics and Optical Instruments
Ray Optics covers reflection by plane and spherical mirrors, refraction and Snell's law, total internal reflection, refraction at spherical surfaces and thin lenses (lens maker's formula, power, combinations), refraction through a prism, dispersion and scattering, the human eye and optical instruments. NEET asks sign-convention-based numericals on mirrors and lenses, prism and TIR problems, magnifying power of microscopes and telescopes, and NCERT application facts such as mirage, optical fibres and the colour of the sky.
Exam tip: Write the sign of every u, v, f and R before substituting; a five-second sign check prevents most errors in mirror and lens numericals.
40 questionsPractice testUnits and Measurements
SI base and derived units, significant figures and rounding, errors in measurement (absolute, relative, percentage and how errors combine), least count of instruments, and dimensions with their applications. NEET usually asks 1-2 questions: dimensional formulae, unit conversion with dimensions, and error propagation numericals.
Exam tip: Memorise about 15 standard dimensional formulae and the rule 'power x percentage error, then add'. Most NEET questions from this chapter can then be solved in under 30 seconds.
27 questionsPractice testSystem of Particles and Rotational Motion
This chapter covers the centre of mass, torque and angular momentum, equilibrium of rigid bodies, moment of inertia (with the parallel- and perpendicular-axis theorems), rotational kinematics and dynamics, and conservation of angular momentum. NEET usually asks 2–3 questions from here: numericals on moment of inertia, conservation of angular momentum, and torque as a cross product, plus some assertion-reason and match-the-column questions on moment-of-inertia formulas.
Exam tip: Focus on moment of inertia (with the axis theorems), torque and conservation of angular momentum. For merging or shrinking rotors, use I₁ω₁ = I₂ω₂ first and then K = L²/2I.
24 questionsPractice testGravitation
This chapter covers Newton's law of gravitation, Kepler's laws, how g varies with height and depth, gravitational potential energy, escape speed, orbital motion and satellite energy. NEET typically asks 1–2 questions, mostly ratio-based numericals on g, escape and orbital speed, Kepler's third law, satellite energies, and conceptual statement or assertion-reason questions on spherical shells.
Exam tip: Most gravitation questions are ratio questions. Write the governing proportionality first (g ∝ M/R², v_e ∝ √(M/R), T ∝ r^(3/2), F ∝ r⁴ for touching spheres) and substitute the ratios rather than actual values. Remember the energy ratio 1 : −2 : −1 for satellites.
26 questionsPractice testMechanical Properties of Solids
This chapter covers how solids deform under load: stress, strain, Hooke's law, the stress–strain curve, and the three elastic moduli (Young's, bulk and shear), with applications to ropes, beams and mountains. NEET mostly asks ratio-type numericals on extension (ΔL = FL/AY), reading the stress–strain curve, and conceptual questions comparing moduli and materials.
Exam tip: Solve extension questions by ratios: write ΔL ∝ FL/r² (or ∝ L² at constant volume) and compare, rather than plugging in numbers. Learn the order and meaning of the points on the stress–strain curve; NEET often asks them as match-the-column.
30 questionsPractice testMechanical Properties of Fluids
This chapter covers fluids at rest and in motion: pressure, Pascal's law, the equation of continuity, Bernoulli's principle and its applications, viscosity with Stokes' law and terminal velocity, and surface tension with drops, bubbles and capillary rise. NEET asks direct formula numericals (hydraulic lift, Torricelli, terminal velocity, excess pressure, capillary height) along with conceptual statement and match questions.
Exam tip: For Bernoulli and continuity numericals, find the speeds from A1v1 = A2v2 first, then apply ΔP = ½ρ(v2² − v1²). For drop and bubble questions, count the number of free surfaces before choosing 2S/r or 4S/r.
29 questionsPractice testThermal Properties of Matter
This chapter covers temperature scales, thermal expansion of solids, liquids and gases (including water's anomalous expansion), specific heat and calorimetry, changes of state and latent heat, and heat transfer by conduction, convection and radiation. NEET mostly asks short numericals on expansion, mixing calorimetry (often with ice), series and parallel conduction, Stefan/Wien and Newton's law of cooling, plus one or two conceptual questions.
Exam tip: In every calorimetry problem with ice, first compare the heat available with the heat needed to melt all the ice. For conduction networks, convert each slab into a thermal resistance L/KA and solve it like a circuit.
38 questionsPractice testKinetic Theory
This chapter covers the molecular nature of matter, the ideal gas equation, the kinetic-theory derivation of pressure, the link between temperature and kinetic energy, equipartition of energy, specific heats of gases and solids, and mean free path. NEET asks numericals on v_rms and its ratios, γ of gas mixtures, degrees of freedom and internal energy, with assertion-reason questions on equipartition.
Exam tip: Memorise the f, Cv, Cp and γ table for monatomic, diatomic and polyatomic gases, and get γ of any mixture from mole-weighted Cv and Cp. For speed ratios, use v ∝ √(T/M) and skip the full formula.
30 questionsPractice testOscillations
Covers periodic motion, the SHM equation x = A sin(ωt + φ), phase, velocity and acceleration in SHM, the link between SHM and uniform circular motion, energy in SHM, the spring-block system and the simple pendulum. NEET mostly asks direct numericals on period, maximum speed/acceleration and energy ratios, plus spring-combination, pendulum-in-a-lift and time-to-reach-a-position problems.
Exam tip: Write x, v, a and E in terms of A and ω first, then substitute. Most NEET SHM numericals are one-line ratio problems (T ∝ √(m/k), T ∝ √(L/g), E ∝ A²).
30 questionsPractice testWaves
Covers transverse and longitudinal waves, the travelling-wave equation y = a sin(kx - ωt), wave speed on a string and in a gas (Newton and Laplace), superposition, reflection, standing waves on strings and in organ pipes, and beats. NEET asks reading λ, f and v from a wave equation, harmonics of strings and pipes, the open-versus-closed pipe comparison, and beat problems involving waxing or filing a tuning fork.
Exam tip: For harmonic questions, sketch the node-antinode pattern and count quarter-wavelengths. For beat problems, list both candidate frequencies and test which one moves the right way after waxing or filing.
30 questionsPractice testElectric Charges and Fields
Covers the properties of charge, Coulomb's law, the electric field and field lines, the electric dipole, electric flux, and Gauss's law with its standard applications. NEET usually sets 1-2 questions here: short numericals on force superposition, null points, dipole torque and fields, flux through cube faces, and conceptual one-liners on field lines and shielding.
Exam tip: For superposition problems, sketch the vectors and use symmetry first: many centre-of-square and triangle configurations cancel. For flux problems, picture the extra cubes needed to fully enclose the charge.
30 questionsPractice testElectrostatic Potential and Capacitance
Covers electric potential and potential energy, equipotential surfaces, the relation E = -dV/dr, conductors and dielectrics, capacitors (parallel-plate, series and parallel), the effect of dielectrics, and stored energy. NEET reliably sets 1-2 numericals here: capacitor networks, dielectric insertion with the battery connected or disconnected, charge sharing with energy loss, and potential due to systems of charges.
Exam tip: First ask what stays constant: Q (isolated capacitor) or V (battery connected). Every dielectric or plate-separation question follows from that. Redraw networks by labelling equipotential nodes before combining capacitors.
28 questionsPractice testCurrent Electricity
The chapter covers drift of charges and current, Ohm's law, resistivity and its temperature dependence, emf and internal resistance, combining cells, Kirchhoff's rules, and the Wheatstone and metre bridge, all following the current NCERT; potentiometer and colour code are not in the NEET 2026 syllabus. NEET usually sets 2–3 questions: short numericals on drift speed, stretched wires, cell combinations, power and bridge balance, plus one conceptual or statement-based item.
Exam tip: In circuit numericals, first look for symmetry or a balanced bridge, then use node analysis or Thevenin to cross-check. Check drift and resistivity answers against the exponent (v_d is about 10⁻⁴ m/s).
30 questionsPractice testMoving Charges and Magnetism
The chapter covers the Lorentz force and the motion of charges in magnetic and crossed fields, the Biot–Savart law (circular loop), Ampere's law (long wire, solenoid), force between parallel currents, torque on a current loop as a magnetic dipole, and the moving-coil galvanometer with its conversion to an ammeter or voltmeter. NEET usually sets 2–3 questions: ratio problems for charged particles (r, T, KE), field at a centre or axis, and shunt or series-resistance calculations.
Exam tip: For any charged-particle ratio question, first write r, T or K in terms of m, q and whichever quantity is held equal, then substitute m_α = 4m_p and q_α = 2e. For fields, set up the vector directions before adding magnitudes.
30 questionsPractice testMagnetism and Matter
This chapter covers the bar magnet as an equivalent solenoid, the fields of a magnetic dipole on its axis and equatorial line, the torque and potential energy of a dipole in a uniform field, and Gauss's law for magnetism. It also covers magnetisation, magnetic intensity, and dia-, para- and ferromagnetic materials, including Curie's law. NEET treats bar-magnet fields and torque qualitatively, but the NCERT formulas are worth knowing for simple ratio questions; it also asks on B = μ0μrH and Curie's law, plus conceptual questions classifying materials.
Exam tip: Learn the three material classes by the sign and size of χ and μr, with two examples each. For dipole numericals, write U = −mB cos θ first, because the work and stability questions follow directly from it.
27 questionsPractice testElectromagnetic Induction
This chapter covers magnetic flux, Faraday's law, Lenz's law and energy conservation, motional emf (including rotating rods and wheels), eddy currents, self- and mutual inductance, energy stored in an inductor, and the AC generator. NEET mostly sets one- or two-step numericals on ε = −dΦ/dt, Blv, ½Bωl², L = μ0N²A/l, ½LI² and NBAω, plus direction questions using Lenz's law.
Exam tip: For every EMI numerical, first write the flux as a function of time, Φ(t), then differentiate it. For direction questions, apply Lenz's law with the oppose-the-change rule, using the right-hand rule or v × B for motional emf.
30 questionsPractice testAlternating Current
This chapter covers AC voltage and current, rms values, and the behaviour of R, L and C. It then treats phasors, series LCR circuits with resonance, Q factor and bandwidth, power and power factor, LC oscillations and the transformer. NEET asks 1–2 questions every year, mostly quick numericals on impedance, power, resonant frequency, rms values and transformer ratios, along with phase-relation concepts.
Exam tip: Draw the impedance triangle (R, XL − XC, Z) first; it gives Z, φ, power factor and power in one step. For resonance questions, write ω0 = 1/√(LC) and Q = ω0L/R straight away.
29 questionsPractice testElectromagnetic Waves
This chapter covers displacement current and the Ampere–Maxwell law, Maxwell's equations, and how accelerated charges produce EM waves. It then treats the wave's transverse nature (E ⊥ B ⊥ direction, E0 = cB0, c = 1/√(μ0ε0)), its energy and momentum, and the EM spectrum with sources and uses. NEET usually asks 1 question, either a quick E0 = cB0 or direction-of-B numerical or a match-the-spectrum-use or production question.
Exam tip: Memorise the spectrum order and one source and one use for each band; they give easy match-the-column marks. For numericals, E0 = cB0 and k = ω/c are enough to read any wave equation.
30 questionsPractice testWave Optics
This chapter covers Huygens' principle and wavefronts (including proving the laws of reflection and refraction), coherent sources and Young's double-slit interference, single-slit diffraction, and polarisation (Malus' law, Brewster's law, polaroids). NEET usually asks direct numericals on fringe width, fringe positions, intensity ratios, central-maximum width and polaroid combinations, along with conceptual statement and assertion-reason items.
Exam tip: Write β = λD/d first and express every fringe question as a multiple of β. For polaroid chains, multiply cos² of the angle between each pair of successive axes, starting from I₀/2.
30 questionsPractice testDual Nature of Radiation and Matter
This chapter covers the particle nature of light through the photoelectric effect (Hertz and Lenard's observations, threshold frequency, stopping potential, saturation current, Einstein's equation) and the wave nature of matter through de Broglie's relation. NEET asks numericals on Kmax, stopping potential, threshold values, photon momentum and number, and de Broglie wavelength ratios, plus conceptual questions on intensity vs frequency effects.
Exam tip: Keep hc = 1240 eV nm handy for quick photon-energy and threshold calculations. For de Broglie ratio questions, write λ in terms of the quantity that is held equal (p, K or V) before cancelling.
30 questionsPractice testAtoms
This chapter covers Rutherford's alpha-scattering experiment and nuclear model, the Bohr model of hydrogen-like atoms (quantised radius, speed, energy and angular momentum), the hydrogen line spectrum and its series, and de Broglie's explanation of Bohr's quantisation rule. NEET asks 2–3 questions a year, mostly direct numericals on rₙ, Eₙ, transition wavelengths, number of spectral lines and ratios across series.
Exam tip: Memorise E₁ = −13.6 eV, r₁ = 0.53 Å and hc = 1240 eV nm, and solve most numericals by ratio (E ∝ Z²/n², r ∝ n²/Z). It is faster and less error-prone than plugging into full formulas.
30 questionsPractice testNuclei
This chapter covers the composition and size of nuclei, atomic masses and isotopes/isobars/isotones, nuclear density, mass–energy equivalence, mass defect, binding energy and the BE/A curve, the properties of the nuclear force, and the energy released in fission and fusion. NEET usually asks 1–2 questions, typically radius ratios, binding energy or Q-value from given masses or BE/A, and conceptual points about the BE/A curve and nuclear force.
Exam tip: For any fission or fusion numerical, write Q = Σ(A × BE/A) of products − Σ(A × BE/A) of reactants. Check the sign: energy is released only when the products are more tightly bound.
30 questionsPractice testSemiconductor Electronics: Materials, Devices and Simple Circuits
The chapter covers energy bands, intrinsic and extrinsic semiconductors, the p-n junction and its I-V characteristics, rectifiers, special-purpose diodes (Zener, LED, photodiode, solar cell) and the basic logic gates. NEET usually sets 1-2 questions from it: carrier-concentration and conductivity numericals, diode circuits with ideal or 0.7 V diodes, Zener regulator currents, and logic-gate truth tables.
Exam tip: In any diode circuit, first decide which diodes are forward biased and treat reverse-biased ones as open circuits. For logic-gate circuits, simplify with De Morgan or test all four input combinations before choosing an option.
28 questionsPractice test
Physics: solved examples
A taste of each chapter's practice set — try it, then open the answer and solution.
- Kinematics
A projectile is fired from level ground with a fixed launch speed. At what angle to the horizontal must it be projected so that its horizontal range is maximum?
- A60°
- B30°
- C90°
- D45°
Show answer & solution
Correct answer: (D) 45°
Range R = u^2 sin(2θ)/g is maximum when sin(2θ) = 1, i.e. 2θ = 90°, so θ = 45°.
- Laws of Motion
A machine gun fires 10 bullets per second, each of mass 20 g at a speed of 500 m/s. The force required to hold the gun in position is:
- A50 N
- B1000 N
- C100 N
- D20 N
Show answer & solution
Correct answer: (C) 100 N
Force = rate of change of momentum = (number per second) x m x v = 10 x 0.02 x 500 = 100 N.
- Thermodynamics
According to the second law of thermodynamics, the efficiency of a heat engine operating between two given temperatures is maximum for:
- Aan irreversible engine
- Bany real engine
- Ca reversible (Carnot) engine
- Dan engine with a regenerator
Show answer & solution
Correct answer: (C) a reversible (Carnot) engine
No engine can be more efficient than a reversible (Carnot) engine working between the same two temperatures; thus a reversible cycle gives maximum efficiency.