NEET (Medical) · Physics
Electromagnetic Induction
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electromagnetic Induction — quick revision notes
- Φ = BA cos θ, where θ is the angle between B and the normal. ε = −N dΦ/dt. Charge that flows: Q = NΔΦ/R, independent of time.
- Motional emf: ε = Blv when B, l and v are mutually perpendicular. For a rod rotating about one end, ε = ½Bωl². For a wheel, the emf between axle and rim does not depend on the number of spokes.
- Rod on rails: I = Blv/R and the retarding force is F = B²l²v/R. Mechanical power Fv = ε²/R. A falling rod reaches terminal speed v = mgR/(B²l²).
- Lenz's law follows from energy conservation. The induced current opposes the change in flux: an approaching N pole sees an N face (anticlockwise current), and coaxial loops with increasing current repel.
- Self-inductance: ε = −L dI/dt. For a solenoid, L = μ0N²A/l = μ0n²Al. Energy stored U = ½LI² and energy density u = B²/2μ0.
- Mutual inductance: for coaxial solenoids, M = μ0n1n2πr1²l (r1 is the inner radius). M12 = M21, and M depends only on geometry and the medium. ε2 = −M dI1/dt.
- AC generator: ε = NBAω sin ωt and ε0 = NBAω. The emf is maximum when the coil's plane is parallel to B (flux zero) and zero when the plane is perpendicular to B.
- Eddy currents are reduced by laminated or slotted cores. They are used in induction furnaces, magnetic brakes, electromagnetic damping and induction meters. L/R has the dimension of time.
Common mistakes to avoid
- Taking θ in Φ = BA cos θ as the angle with the plane of the coil instead of with its normal. This also catches students in generator questions that give the plane's angle.
- Forgetting N in the emf or charge formulas, or forgetting the factor 2 in ΔΦ when a coil is flipped through 180°.
- Using Bωl² instead of ½Bωl² for a rotating rod, or multiplying by the number of spokes for a wheel.
- Leaving mH or cm² unconverted (L = 50 mH = 0.050 H) before using ½LI² or L = μ0N²A/l.
Electromagnetic Induction — solved practice questions
8 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
A plane loop of area 0.020 m² is in a uniform magnetic field of 0.50 T. The normal to the loop makes an angle of 60° with the field. What is the magnetic flux through the loop?
- A0.0087 Wb
- B0.0050 Wb
- C0.020 Wb
- D0.010 Wb
Show answer & solution
Correct answer: (B) 0.0050 Wb
Φ = BA cos θ = 0.50 × 0.020 × cos 60° = 0.010 × 0.5 = 0.0050 Wb. - Q2easyReport
A coil of 100 turns is in a magnetic field. The flux through each turn falls from 0.04 Wb to 0.01 Wb in 0.1 s. What is the magnitude of the average induced emf?
- A30 V
- B300 V
- C0.3 V
- D3 V
Show answer & solution
Correct answer: (A) 30 V
|ε| = N ΔΦ/Δt = 100 × (0.04 − 0.01)/0.1 = 100 × 0.3 = 30 V. - Q3mediumReport
A coil of 50 turns and area 0.010 m² has total resistance 5.0 Ω. Its plane is perpendicular to a magnetic field of 0.60 T. The field is reduced steadily to zero. How much charge flows through the coil?
- A1.2 × 10⁻³ C
- B0.60 C
- C0.30 C
- D0.060 C
Show answer & solution
Correct answer: (D) 0.060 C
Q = NΔΦ/R = 50 × (0.60 × 0.010)/5.0 = 0.30/5.0 = 0.060 C. The charge does not depend on how fast the field changes. - Q4easyReport
The north pole of a bar magnet is moved towards a closed circular coil. What is the direction of the induced current in the coil, as seen from the magnet's side?
- AClockwise, and the near face of the coil acts as a south pole
- BClockwise, and the near face of the coil acts as a north pole
- CNo current flows, because the magnet does not touch the coil
- DAnticlockwise, and the near face of the coil acts as a north pole
Show answer & solution
Correct answer: (D) Anticlockwise, and the near face of the coil acts as a north pole
By Lenz's law, the coil opposes the approaching north pole by making its near face a north pole. A face looks like a north pole when the current in it appears anticlockwise to the viewer. - Q5easyReport
Lenz's law is a consequence of the law of conservation of:
- Acharge
- Benergy
- Cangular momentum
- Dlinear momentum
Show answer & solution
Correct answer: (B) energy
The induced current opposes the change that produces it. Mechanical work must therefore be done to keep the change going, and that work appears as electrical energy. This is conservation of energy. - Q6easyReport
A straight conductor 0.50 m long moves at 4.0 m/s perpendicular to its length and to a uniform magnetic field of 0.20 T. What emf is induced across its ends?
- A0.40 V
- B1.6 V
- C0.10 V
- D4.0 V
Show answer & solution
Correct answer: (A) 0.40 V
Motional emf ε = Blv = 0.20 × 0.50 × 4.0 = 0.40 V. - Q7mediumReport
A metal rod 1.0 m long rotates at an angular speed of 400 rad/s about an axis through one end, perpendicular to the rod. A uniform magnetic field of 0.50 T acts parallel to the axis. What emf is developed between the ends of the rod?
- A100 V
- B400 V
- C200 V
- D50 V
Show answer & solution
Correct answer: (A) 100 V
ε = ½Bωl² = ½ × 0.50 × 400 × (1.0)² = 100 V. - Q8hardReport
A metal wheel with 10 spokes, each 0.50 m long, rotates at 120 revolutions per minute in a plane perpendicular to a uniform magnetic field of 0.40 T. What emf is induced between the axle and the rim? (Take π = 3.14)
- A1.26 V
- B0.31 V
- C6.3 V
- D0.63 V
Show answer & solution
Correct answer: (D) 0.63 V
ω = 120 rpm = 2 rev/s = 4π rad/s. ε = ½Bωr² = ½ × 0.40 × 4π × 0.25 = 0.2π ≈ 0.63 V. The spokes are in parallel, so the number of spokes does not change the emf.
Ready to test yourself? Take the 22-question Electromagnetic Induction test →