NEET (Medical) · Physics

Thermal Properties of Matter

38 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

14
easy
18
medium
6
hard

Thermal Properties of Matter — quick revision notes

This chapter covers temperature scales, thermal expansion of solids, liquids and gases (including water's anomalous expansion), specific heat and calorimetry, changes of state and latent heat, and heat transfer by conduction, convection and radiation. NEET mostly asks short numericals on expansion, mixing calorimetry (often with ice), series and parallel conduction, Stefan/Wien and Newton's law of cooling, plus one or two conceptual questions.
  • Scales: (C - 0)/100 = (F - 32)/180 = (K - 273.15)/100. C = F at -40. Triple point of water = 273.16 K at about 611 Pa.
  • Expansion: ΔL = LαΔT, ΔA = AβΔT, ΔV = VγΔT. For isotropic solids β = 2α and γ = 3α. For an ideal gas at constant P, γ = 1/T.
  • Thermal stress in a clamped rod = YαΔT. A pendulum clock loses (1/2)αΔθ × 86400 s per day when it gets hotter.
  • Apparent expansion of a liquid: γ_app = γ_liquid - γ_vessel, where γ_vessel = 3α_vessel. Water is densest at 4 °C.
  • Calorimetry: heat lost = heat gained, Q = mcΔT and Q = mL. For water: c = 1 cal/g °C (4186 J/kg K), Lf = 80 cal/g, Lv = 540 cal/g.
  • Conduction: H = KAΔT/L. Thermal resistance R = L/KA, combined in series and parallel like electrical resistors. For equal thicknesses in series, K_eq = 2K1K2/(K1 + K2).
  • Radiation: P = eσAT4 (σ = 5.67 × 10−8 W/m² K4) and λm T = b = 2.9 × 10−3 m K. Net loss = eσA(T4 - Ts4).
  • Newton's law of cooling: dT/dt = -k(T - Ts), valid for small temperature differences. Average-temperature method: (T1 - T2)/t = k[(T1 + T2)/2 - Ts].

Common mistakes to avoid

  • Using °C instead of kelvin in Stefan's law, Wien's law or the gas law γ = 1/T.
  • In ice-water mixing, assuming all the ice melts without first checking whether the available heat is enough. If it is not, the final temperature is 0 °C.
  • Taking γ_vessel = α instead of 3α, and thinking a hole in a heated plate shrinks.
  • For slabs in series, averaging the conductivities instead of adding the thermal resistances.
Exam tip: In every calorimetry problem with ice, first compare the heat available with the heat needed to melt all the ice. For conduction networks, convert each slab into a thermal resistance L/KA and solve it like a circuit.

Thermal Properties of Matter — solved practice questions

10 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    At what temperature do the Celsius and Fahrenheit scales show the same numerical reading?

    • A40
    • B-40
    • C-32
    • D0
    Show answer & solution

    Correct answer: (B) -40

    Put F = C in F = (9/5)C + 32. This gives C - 1.8C = 32, so C = -40. The reading is -40 °C = -40 °F.
  2. Q2easyReport

    A temperature of 313.15 K is equal to:

    • A140 °F
    • B96.8 °F
    • C104 °F
    • D72 °F
    Show answer & solution

    Correct answer: (C) 104 °F

    313.15 K = 313.15 - 273.15 = 40 °C. Then F = (9/5)(40) + 32 = 72 + 32 = 104 °F.
  3. Q3mediumReport

    A faulty thermometer reads 5 °C in melting ice and 95 °C in steam at 1 atm. What is the true temperature when it reads 41 °C?

    • A40 °C
    • B45.6 °C
    • C36 °C
    • D41 °C
    Show answer & solution

    Correct answer: (A) 40 °C

    True temperature = (reading - lower fixed point)/(upper - lower) × 100 = (41 - 5)/(95 - 5) × 100 = 36/90 × 100 = 40 °C.
  4. Q4mediumReport

    A steel rod 2 m long is heated through 50 K. The coefficient of linear expansion of steel is 1.2 × 10−5 K−1. How much does its length increase?

    • A1.2 mm
    • B2.4 mm
    • C0.6 mm
    • D12 mm
    Show answer & solution

    Correct answer: (A) 1.2 mm

    ΔL = LαΔT = 2 × 1.2 × 10−5 × 50 = 1.2 × 10−3 m = 1.2 mm.
  5. Q5easyReport

    For an isotropic solid, the ratio of the coefficients of linear expansion (α), area expansion (β) and volume expansion (γ), α : β : γ, is:

    • A1 : 3 : 2
    • B1 : 1 : 1
    • C1 : 2 : 3
    • D3 : 2 : 1
    Show answer & solution

    Correct answer: (C) 1 : 2 : 3

    For an isotropic solid, β = 2α and γ = 3α. So α : β : γ = 1 : 2 : 3.
  6. Q6easyReport

    What is the coefficient of volume expansion of an ideal gas at constant pressure at 27 °C?

    • A300 K−1
    • B(1/273) K−1
    • C(1/300) K−1
    • D(1/27) K−1
    Show answer & solution

    Correct answer: (C) (1/300) K−1

    At constant pressure V ∝ T, so γ = (1/V)(dV/dT) = 1/T. At T = 27 + 273 = 300 K, γ = (1/300) K−1.
  7. Q7mediumReport

    Statement I: When water is heated from 0 °C to 4 °C, its volume decreases. Statement II: Because of this anomalous behaviour, a lake freezes from the top surface downward, and aquatic life survives below. Choose the correct option.

    • AStatement I is incorrect but Statement II is correct
    • BBoth Statement I and Statement II are incorrect
    • CStatement I is correct but Statement II is incorrect
    • DBoth Statement I and Statement II are correct
    Show answer & solution

    Correct answer: (D) Both Statement I and Statement II are correct

    Water contracts between 0 °C and 4 °C and is densest at 4 °C. Denser 4 °C water sinks while colder water and ice stay on top, so a lake freezes from the surface down.
  8. Q8hardReport

    A steel rod is clamped rigidly between two walls and heated through 50 K. Take Y = 2 × 1011 Pa and α = 1.2 × 10−5 K−1 for steel. What thermal stress develops in the rod?

    • A2.4 × 108 Pa
    • B1.2 × 106 Pa
    • C1.2 × 107 Pa
    • D1.2 × 108 Pa
    Show answer & solution

    Correct answer: (D) 1.2 × 108 Pa

    Thermal stress = YαΔT = 2 × 1011 × 1.2 × 10−5 × 50 = 2 × 1011 × 6 × 10−4 = 1.2 × 108 Pa.
  9. Q9hardReport

    A pendulum clock with a brass pendulum (α = 2 × 10−5 K−1) keeps correct time at 20 °C. If the room stays at 30 °C, how much time does the clock gain or lose in one day (86400 s)?

    • ALoses 4.32 s
    • BLoses 17.28 s
    • CLoses 8.64 s
    • DGains 8.64 s
    Show answer & solution

    Correct answer: (C) Loses 8.64 s

    Since T ∝ √L, ΔT/T = (1/2)αΔθ = (1/2)(2 × 10−5)(10) = 10−4. Time lost per day = 10−4 × 86400 = 8.64 s. The clock loses time because the longer pendulum swings more slowly.
  10. Q10easyReport

    A metal plate has a circular hole in it. When the plate is heated uniformly, the diameter of the hole:

    • Aincreases if the hole is small and decreases if it is large
    • Bdecreases
    • Cremains the same
    • Dincreases, as though the hole were made of the same metal
    Show answer & solution

    Correct answer: (D) increases, as though the hole were made of the same metal

    Thermal expansion enlarges every linear dimension of the plate in the same ratio, holes included. The hole therefore expands exactly as a disc of the same metal would.

Ready to test yourself? Take the 28-question Thermal Properties of Matter test →