NEET (Medical) · Physics

Units and Measurements

27 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
13
medium
5
hard

Units and Measurements — quick revision notes

SI base and derived units, significant figures and rounding, errors in measurement (absolute, relative, percentage and how errors combine), least count of instruments, and dimensions with their applications. NEET usually asks 1-2 questions: dimensional formulae, unit conversion with dimensions, and error propagation numericals.
  • There are 7 SI base quantities: length (m), mass (kg), time (s), current (A), temperature (K), amount of substance (mol) and luminous intensity (cd). 1 ly = 9.46 × 1015 m; 1 AU = 1.496 × 1011 m; 1 parsec = 3.08 × 1016 m.
  • Significant figures: all non-zero digits count; zeros between digits count; leading zeros do not; trailing zeros count whenever the number has a decimal point (4.700 and 470.0 each have 4 significant figures). Addition/subtraction keeps the fewest decimal places; multiplication/division keeps the fewest significant figures.
  • Rounding when the dropped digit is 5: leave an even preceding digit unchanged and raise an odd one by 1 (2.745 becomes 2.74; 2.735 becomes 2.74).
  • Errors: mean absolute error = average of |a_i - a_mean|; relative error = delta a / a. For Z = A +/- B, delta Z = delta A + delta B. For Z = Ap Bq / Cr, the fractional error in Z = p(dA/A) + q(dB/B) + r(dC/C), always added.
  • Least count: Vernier = 1 MSD - 1 VSD; screw gauge = pitch / number of circular divisions; reading = MSR + (coinciding division x LC) - zero error.
  • Common dimensions: G [M−1L3T−2]; h and angular momentum [ML2T−1]; viscosity [ML−1T−1]; surface tension [MT−2]; stress, pressure and Y [ML−1T−2]; epsilon_0 [M−1L−3T4A2]; impulse [MLT−1].
  • Unit conversion: n2 = n1 (M1/M2)a (L1/L2)b (T1/T2)c. Example: G = 6.67 × 10−11 SI = 6.67 × 10−8 CGS.
  • Uses of dimensional analysis: checking equations (homogeneity), converting units and deriving relations (T is proportional to √(l/g)). It cannot find dimensionless constants, cannot derive a relation that has a sum or difference of terms, and fails for exponential, logarithmic and trigonometric relations.

Common mistakes to avoid

  • Errors are always added, even for a quantity in the denominator or a subtraction.
  • The power multiplies the percentage error: in r3 the error triples, in √c it halves.
  • Trailing zeros in a whole number without a decimal point (for example 4700) are ambiguous. Use scientific notation to fix significant figures.
  • A dimensionally correct equation need not be physically correct. Torque and work share dimensions but are different physical quantities.
Exam tip: Memorise about 15 standard dimensional formulae and the rule 'power x percentage error, then add'. Most NEET questions from this chapter can then be solved in under 30 seconds.

Units and Measurements — solved practice questions

7 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    Which of the following is NOT one of the seven SI base quantities?

    • AElectric current
    • BAmount of substance
    • CLuminous intensity
    • DElectric charge
    Show answer & solution

    Correct answer: (D) Electric charge

    The SI base quantities are length, mass, time, electric current, thermodynamic temperature, amount of substance and luminous intensity. Charge is derived: 1 C = 1 A s.
  2. Q2mediumReport

    Which quantity has the same dimensions as Planck's constant?

    • AEnergy
    • BLinear momentum
    • CPower
    • DAngular momentum
    Show answer & solution

    Correct answer: (D) Angular momentum

    h = E/nu = [ML2T−2]/[T−1] = [ML2T−1]. Angular momentum = mvr also has dimensions [ML2T−1].
  3. Q3easyReport

    How many significant figures are there in 0.007020?

    • A4
    • B7
    • C6
    • D3
    Show answer & solution

    Correct answer: (A) 4

    Leading zeros are not significant. The digits 7, 0, 2 and the trailing 0 after the decimal point are significant, giving 4 significant figures.
  4. Q4mediumReport

    Using the standard rounding rule for a dropped digit of 5, the numbers 2.745 and 2.735, rounded to three significant figures, become respectively:

    • A2.75 and 2.74
    • B2.74 and 2.74
    • C2.75 and 2.73
    • D2.74 and 2.73
    Show answer & solution

    Correct answer: (B) 2.74 and 2.74

    When the dropped digit is 5, the preceding digit is left unchanged if it is even and raised by 1 if it is odd. So 2.745 becomes 2.74 (4 is even) and 2.735 becomes 2.74 (3 is odd).
  5. Q5mediumReport

    Three masses, 436.32 g, 227.2 g and 0.301 g, are added. What is the sum, written to the correct number of significant figures?

    • A663.821 g
    • B663.8 g
    • C663.82 g
    • D664 g
    Show answer & solution

    Correct answer: (B) 663.8 g

    The raw sum is 663.821 g. In addition, the result keeps as many decimal places as the least precise term (227.2 g has one), so the answer is 663.8 g.
  6. Q6mediumReport

    The length and breadth of a rectangular sheet are 4.234 m and 1.005 m. What is its area, written to the correct number of significant figures?

    • A4.25517 m2
    • B4.2552 m2
    • C4.26 m2
    • D4.255 m2
    Show answer & solution

    Correct answer: (D) 4.255 m2

    4.234 × 1.005 = 4.234 + 0.02117 = 4.25517 m2. Both factors have 4 significant figures, so the product is rounded to 4 significant figures: 4.255 m2.
  7. Q7easyReport

    What is the dimensional formula of the universal gravitational constant G?

    • A[M−1 L3 T−2]
    • B[M−1 L2 T−2]
    • C[M−2 L3 T−2]
    • D[M L3 T−2]
    Show answer & solution

    Correct answer: (A) [M−1 L3 T−2]

    From F = G m1 m2 / r2, G = F r2 / m2 = [MLT−2][L2]/[M2] = [M−1 L3 T−2].

Ready to test yourself? Take the 20-question Units and Measurements test →