NEET (Medical) · Physics

Alternating Current

29 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
15
medium
6
hard

Alternating Current — quick revision notes

This chapter covers AC voltage and current, rms values, and the behaviour of R, L and C. It then treats phasors, series LCR circuits with resonance, Q factor and bandwidth, power and power factor, LC oscillations and the transformer. NEET asks 1–2 questions every year, mostly quick numericals on impedance, power, resonant frequency, rms values and transformer ratios, along with phase-relation concepts.
  • Vrms = V0/√2, Irms = I0/√2. The half-cycle average is 2I0/π ≈ 0.637 I0, and the full-cycle average is zero.
  • XL = ωL = 2πfL (current lags V by π/2); XC = 1/ωC (current leads V by π/2). For a pure L or C, the average power is zero.
  • Series LCR: Z = √(R² + (XL − XC)²), tan φ = (XL − XC)/R, and power factor cos φ = R/Z.
  • Average power P = Vrms Irms cos φ = Irms²R. The wattless current is Irms sin φ.
  • Resonance: ω0 = 1/√(LC), XL = XC, Z = R (minimum), current maximum, cos φ = 1. At resonance VL = VC = Q·V and the voltage across the L–C pair is zero.
  • Q = ω0L/R = (1/R)√(L/C) = ω0/(bandwidth). Bandwidth 2Δω = R/L. At the half-power points I = Imax/√2.
  • LC oscillation: ω = 1/√(LC), I0 = ωq0, and energy q0²/2C = ½LI0². UE = UB first occurs at t = T/8, when q = q0/√2.
  • Ideal transformer: Vs/Vp = Ns/Np = Ip/Is. Losses are reduced by thick wires (copper loss), a laminated core (eddy currents), soft iron (hysteresis) and interleaved windings (flux leakage). A transformer cannot work on steady DC.

Common mistakes to avoid

  • Adding the voltages across R, L and C arithmetically. They add as phasors: V = √(VR² + (VL − VC)²).
  • Mixing up peak and rms values. Household 220 V is rms, so its peak is 311 V.
  • Taking bandwidth as R/2L. In NCERT, R/2L is Δω (the half-width), and the bandwidth 2Δω is R/L.
  • Assuming the step-up side also steps up current. In an ideal transformer, current changes inversely with voltage.
Exam tip: Draw the impedance triangle (R, XL − XC, Z) first; it gives Z, φ, power factor and power in one step. For resonance questions, write ω0 = 1/√(LC) and Q = ω0L/R straight away.

Alternating Current — solved practice questions

7 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    An AC voltage is given by V = 220√2 sin(100πt) volt. What are its rms value and frequency?

    • A220 V, 100 Hz
    • B311 V, 50 Hz
    • C220 V, 50 Hz
    • D156 V, 100 Hz
    Show answer & solution

    Correct answer: (C) 220 V, 50 Hz

    Vrms = V0/√2 = 220√2/√2 = 220 V. ω = 100π rad/s, so f = ω/2π = 50 Hz.
  2. Q2easyReport

    A pure inductor of inductance 0.2 H is connected to a 220 V (rms), 50 Hz AC supply. What is the rms current? (Take π = 3.14)

    • A1.1 A
    • B3.5 A
    • C11 A
    • D7.0 A
    Show answer & solution

    Correct answer: (B) 3.5 A

    XL = 2πfL = 2 × 3.14 × 50 × 0.2 = 62.8 Ω. Irms = 220/62.8 ≈ 3.5 A.
  3. Q3easyReport

    A capacitor of capacitance (100/π) μF is connected to a 200 V (rms), 50 Hz supply. What is the rms current in the circuit?

    • A2 A
    • B20 A
    • C2π A
    • D0.2 A
    Show answer & solution

    Correct answer: (A) 2 A

    XC = 1/(2πfC) = 1/(2π × 50 × 100×10⁻⁶/π) = 1/(0.01) = 100 Ω. Irms = 200/100 = 2 A.
  4. Q4mediumReport

    A series LCR circuit has R = 30 Ω, XL = 80 Ω and XC = 40 Ω. It is connected to a 200 V (rms) AC source. What is the average power dissipated in the circuit?

    • A480 W
    • B320 W
    • C800 W
    • D640 W
    Show answer & solution

    Correct answer: (A) 480 W

    Z = √(30² + (80−40)²) = 50 Ω, so Irms = 200/50 = 4 A. P = I²R = 16 × 30 = 480 W (check: VIcosφ = 200 × 4 × 30/50 = 480 W).
  5. Q5easyReport

    A series LCR circuit has L = 0.1 H and C = 10 μF. What is its resonant angular frequency?

    • A10⁴ rad/s
    • B100 rad/s
    • C316 rad/s
    • D1000 rad/s
    Show answer & solution

    Correct answer: (D) 1000 rad/s

    ω0 = 1/√(LC) = 1/√(0.1 × 10×10⁻⁶) = 1/√(10⁻⁶) = 1000 rad/s.
  6. Q6mediumReport

    A series LCR circuit has L = 0.4 H, C = 2.5 μF and R = 20 Ω. What is the quality factor (Q) of the circuit?

    • A40
    • B20
    • C200
    • D2
    Show answer & solution

    Correct answer: (B) 20

    ω0 = 1/√(0.4 × 2.5×10⁻⁶) = 1000 rad/s, so Q = ω0L/R = 1000 × 0.4/20 = 20. Check: Q = (1/R)√(L/C) = (1/20) × √(1.6×10⁵) = 400/20 = 20.
  7. Q7easyReport

    When an AC voltage is applied across a pure inductor, how is the current related in phase to the voltage?

    • ACurrent lags the voltage by π/2
    • BCurrent lags the voltage by π/4
    • CCurrent leads the voltage by π/2
    • DCurrent is in phase with the voltage
    Show answer & solution

    Correct answer: (A) Current lags the voltage by π/2

    For a pure inductor, v = vm sin ωt gives i = im sin(ωt − π/2), so the current lags the voltage by a quarter cycle (π/2).

Ready to test yourself? Take the 22-question Alternating Current test →