NEET (Medical) · Physics

Magnetism and Matter

27 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

10
easy
11
medium
6
hard

Magnetism and Matter — quick revision notes

This chapter covers the bar magnet as an equivalent solenoid, the fields of a magnetic dipole on its axis and equatorial line, the torque and potential energy of a dipole in a uniform field, and Gauss's law for magnetism. It also covers magnetisation, magnetic intensity, and dia-, para- and ferromagnetic materials, including Curie's law. NEET treats bar-magnet fields and torque qualitatively, but the NCERT formulas are worth knowing for simple ratio questions; it also asks on B = μ0μrH and Curie's law, plus conceptual questions classifying materials.
  • Short-dipole fields: B_axial = (μ0/4π)(2m/r³) and B_equatorial = (μ0/4π)(m/r³); at the same distance, axial : equatorial = 2 : 1.
  • Dipole in a uniform field: τ = m × B (magnitude mB sin θ) and U = −mB cos θ. Work from θ1 to θ2 is W = mB(cos θ1 − cos θ2); turning from 0° to 180° needs 2mB.
  • Small oscillations of a magnet in a field: T = 2π√(I/mB). A solenoid acts as a magnet with m = NIA.
  • Gauss's law for magnetism: ∮B·dA = 0, because there are no monopoles. Field lines form closed loops, running from S to N inside the magnet.
  • B = μ0(H + M), M = χH, μr = 1 + χ and μ = μ0μr. For a solenoid core, H = nI.
  • Diamagnets have small negative χ and μr slightly below 1 (Bi, Cu, water); superconductors have χ = −1. Paramagnets have small positive χ (Al, Na, O2). Ferromagnets have χ around 10³ (Fe, Co, Ni, Gd).
  • Curie's law for paramagnets: χ = C/T, so M ∝ B/T. Above the Curie temperature a ferromagnet becomes paramagnetic, with χ ∝ 1/(T − T_c).
  • Hysteresis (beyond the NEET 2026 syllabus; background only): loop area = energy lost per unit volume per cycle. Permanent magnets need high retentivity and high coercivity. Electromagnet and transformer cores need high permeability, low coercivity and a narrow loop (soft iron).

Common mistakes to avoid

  • Using sin θ in U, or cos θ in τ. Torque is zero at both 0° and 180°, but only 0° is stable.
  • Writing M = μrH instead of M = (μr − 1)H, or forgetting μr when finding B inside a cored solenoid.
  • Thinking that bending or cutting a magnet keeps m unchanged. A semicircular bend gives 2m/π, and cutting it into two halves gives m/2 for each piece.
  • Saying a diamagnet moves towards the stronger field, or that diamagnetism depends on temperature. Only paramagnetism follows Curie's law.
Exam tip: Learn the three material classes by the sign and size of χ and μr, with two examples each. For dipole numericals, write U = −mB cos θ first, because the work and stability questions follow directly from it.

Magnetism and Matter — solved practice questions

7 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    A short bar magnet has magnetic moment 2.0 A m². What is the magnetic field at a point on its axis 0.10 m from its centre? (Take μ0/4π = 10⁻⁷ T m A⁻¹)

    • A2.0 × 10⁻⁴ T
    • B8.0 × 10⁻⁴ T
    • C4.0 × 10⁻⁴ T
    • D1.0 × 10⁻⁴ T
    Show answer & solution

    Correct answer: (C) 4.0 × 10⁻⁴ T

    Axial field B = (μ0/4π)(2m/r³) = 10⁻⁷ × (2 × 2.0)/(0.10)³ = 10⁻⁷ × 4000 = 4.0 × 10⁻⁴ T.
  2. Q2easyReport

    For a short bar magnet, what is the ratio of the magnetic field at an axial point to that at an equatorial point at the same distance from its centre?

    • A1 : 2
    • B4 : 1
    • C2 : 1
    • D1 : 1
    Show answer & solution

    Correct answer: (C) 2 : 1

    B_axial = (μ0/4π)(2m/r³) and B_equatorial = (μ0/4π)(m/r³), so the ratio is 2 : 1.
  3. Q3easyReport

    A bar magnet of magnetic moment 0.50 A m² is placed in a uniform magnetic field of 0.20 T with its axis at 30° to the field. What is the torque on it?

    • A0.050 N m
    • B0.10 N m
    • C0.025 N m
    • D0.087 N m
    Show answer & solution

    Correct answer: (A) 0.050 N m

    τ = mB sin θ = 0.50 × 0.20 × sin 30° = 0.10 × 0.5 = 0.050 N m.
  4. Q4hardReport

    A magnet of magnetic moment 1.5 A m² lies along a uniform field of 0.40 T (stable equilibrium). How much work must be done to turn it so that its moment points opposite to the field?

    • A2.4 J
    • B0.60 J
    • CZero
    • D1.2 J
    Show answer & solution

    Correct answer: (D) 1.2 J

    U = −mB cos θ, so W = U(180°) − U(0°) = mB − (−mB) = 2mB = 2 × 1.5 × 0.40 = 1.2 J.
  5. Q5mediumReport

    A magnet of magnetic moment 2.0 A m² makes 60° with a uniform field of 0.30 T. How much work is needed to turn it until it is perpendicular to the field?

    • A0.60 J
    • B0.15 J
    • C0.30 J
    • D0.52 J
    Show answer & solution

    Correct answer: (C) 0.30 J

    W = U_f − U_i = (−mB cos 90°) − (−mB cos 60°) = mB/2 = (2.0 × 0.30)/2 = 0.30 J.
  6. Q6easyReport

    A closely wound solenoid has 200 turns, each of area 1.0 × 10⁻⁴ m², and carries a current of 2.5 A. It behaves like a bar magnet. What is its magnetic moment?

    • A0.025 A m²
    • B5.0 × 10⁻³ A m²
    • C0.050 A m²
    • D0.50 A m²
    Show answer & solution

    Correct answer: (C) 0.050 A m²

    m = NIA = 200 × 2.5 × 1.0 × 10⁻⁴ = 0.050 A m².
  7. Q7mediumReport

    A compass needle makes small oscillations in a uniform magnetic field B with a period of 2.0 s. If the field is increased to 4B, what is the new period?

    • A1.0 s
    • B4.0 s
    • C2.0 s
    • D0.5 s
    Show answer & solution

    Correct answer: (A) 1.0 s

    T = 2π√(I/mB), so T ∝ 1/√B. When B becomes 4 times larger, T is halved: 2.0/2 = 1.0 s.

Ready to test yourself? Take the 20-question Magnetism and Matter test →