NEET (Medical) · Physics
Electrostatic Potential and Capacitance
28 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electrostatic Potential and Capacitance — quick revision notes
- Point charge: V = kq/r. Dipole: V = kp cosθ/r2 (zero on the equatorial line). Potential is a scalar, so add values algebraically.
- W = q(V_B - V_A); no work is done along an equipotential. E = -dV/dr is always normal to equipotentials and points toward decreasing V.
- Potential energy: two charges U = kq1q2/r; a system sums all pairs; dipole U = -pE cosθ, and rotating it from 0° to 180° needs W = 2pE.
- Inside a conductor E = 0 and V equals the surface value. Joined spheres satisfy q ∝ r and σ ∝ 1/r.
- Parallel-plate capacitor: C = Kε0A/d. Slab of thickness t: C = ε0A/(d - t + t/K). A metal slab acts as K = ∞, giving C = ε0A/(d - t).
- Series: 1/C = Σ1/Ci (same Q). Parallel: C = ΣCi (same V). Energy U = ½CV2 = Q2/2C = ½QV; energy density u = ½ε0E2.
- Dielectric with battery disconnected: Q same, C → KC, V → V/K, E → E/K, U → U/K. With battery connected: V same, Q → KQ, U → KU.
- Charge sharing: common V = (C1V1 + C2V2)/(C1 + C2); energy lost = C1C2(V1 - V2)2/[2(C1 + C2)].
Common mistakes to avoid
- Mixing up the battery-connected and battery-disconnected cases when a dielectric is inserted or the plates are moved.
- Adding potentials as vectors, or wrongly assuming V = 0 wherever E = 0 (e.g. at the centre of a square of equal charges).
- Treating capacitor series and parallel rules like resistor rules (they are the reverse), or forgetting that capacitors in series carry equal charge.
- Using the full displacement instead of its component along E when finding a potential difference in a uniform field.
Electrostatic Potential and Capacitance — solved practice questions
7 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
What is the electric potential at a distance of 9 cm from a point charge of 3 nC? (1/4πε0 = 9 × 109 N m2 C−2)
- A300 V
- B3000 V
- C30 V
- D100 V
Show answer & solution
Correct answer: (A) 300 V
V = kq/r = 9 × 109 × 3 × 10−9/0.09 = 27/0.09 = 300 V. - Q2easyReport
How much work is done in moving a charge q between two points on the same equipotential surface of potential V?
- AqV
- BZero
- CIt depends on the path followed
- DMaximum, because the charge stays at potential V
Show answer & solution
Correct answer: (B) Zero
W = q(V_B - V_A), and V_B = V_A on an equipotential surface, so W = 0 for any path. - Q3easyReport
How much work is needed to move a charge of 2 µC from a point at potential 10 V to a point at potential 60 V?
- A1.0 × 10−4 J
- B1.2 × 10−4 J
- C2.0 × 10−5 J
- D1.4 × 10−4 J
Show answer & solution
Correct answer: (A) 1.0 × 10−4 J
W = q(V_final - V_initial) = 2 × 10−6 × (60 - 10) = 1.0 × 10−4 J. - Q4mediumReport
What is the electrostatic potential energy of a system of charges +4 µC and -2 µC placed 30 cm apart in vacuum? (1/4πε0 = 9 × 109 N m2 C−2)
- A+0.24 J
- B-0.24 J
- C-0.024 J
- D-0.72 J
Show answer & solution
Correct answer: (B) -0.24 J
U = kq1q2/r = 9 × 109 × (4 × 10−6)(-2 × 10−6)/0.3 = -0.072/0.3 = -0.24 J. The negative sign shows the system is bound. - Q5mediumReport
The electric potential in a region is V = (5x2 + 10) volt, where x is in metres. What is the electric field at x = 1 m?
- A10 V/m along +x
- B15 V/m along -x
- C5 V/m along -x
- D10 V/m along -x
Show answer & solution
Correct answer: (D) 10 V/m along -x
E = -dV/dx = -10x. At x = 1 m this is -10 V/m, so the field has magnitude 10 V/m and points along -x. - Q6mediumReport
A parallel-plate air capacitor has plates of area 0.02 m2 separated by 0.5 mm. What is its capacitance? (ε0 = 8.85 × 10−12 F/m)
- A3.54 nF
- B177 pF
- C35.4 pF
- D354 pF
Show answer & solution
Correct answer: (D) 354 pF
C = ε0A/d = 8.85 × 10−12 × 0.02/(5 × 10−4) = 8.85 × 10−12 × 40 = 3.54 × 10−10 F = 354 pF. - Q7mediumReport
A charged parallel-plate capacitor stores energy U and is disconnected from the battery. A dielectric slab of constant K is then inserted to fill the gap completely. The stored energy becomes:
- AK2 U
- BU/K
- CKU
- DU
Show answer & solution
Correct answer: (B) U/K
With the battery disconnected, Q stays constant and C becomes KC. So U' = Q2/(2KC) = U/K. The missing energy is the work done by the field in pulling the slab in.
Ready to test yourself? Take the 21-question Electrostatic Potential and Capacitance test →