NEET (Medical) · Physics

Mechanical Properties of Fluids

29 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
14
medium
6
hard

Mechanical Properties of Fluids — quick revision notes

This chapter covers fluids at rest and in motion: pressure, Pascal's law, the equation of continuity, Bernoulli's principle and its applications, viscosity with Stokes' law and terminal velocity, and surface tension with drops, bubbles and capillary rise. NEET asks direct formula numericals (hydraulic lift, Torricelli, terminal velocity, excess pressure, capillary height) along with conceptual statement and match questions.
  • Pressure at depth: P = P0 + ρgh, and gauge pressure = ρgh. Pressure depends only on depth, not on the vessel's shape (hydrostatic paradox).
  • Pascal's law (hydraulic lift and brakes): F1/A1 = F2/A2. Volume is conserved, so the piston displacements satisfy A1d1 = A2d2.
  • Continuity: A1v1 = A2v2 (conservation of mass), so v ∝ 1/d². Bernoulli: P + ½ρv² + ρgh = constant (conservation of energy).
  • Torricelli: v = √(2gh). From a hole at depth h in a liquid of height H, the horizontal range = 2√(h(H − h)). Wing lift and the Magnus effect come from the lower pressure where the flow is faster.
  • Viscous force (Stokes): F = 6πηrv. Terminal velocity v_t = 2r²(ρ − σ)g/(9η), so v_t ∝ r². When n drops merge, R = n1/3r. η is in Pa s; liquid viscosity falls and gas viscosity rises with temperature.
  • Surface tension S is in N/m = J/m², with dimensions [MT−2]. Work done W = S × ΔA, doubled for a film with two surfaces.
  • Excess pressure: liquid drop or air bubble inside a liquid 2S/r; soap bubble in air 4S/r.
  • Capillary rise h = 2S cos θ/(ρgr). θ < 90° (water on glass) means the liquid rises; θ > 90° (mercury, about 140°) means it is depressed. Detergents lower S and θ.

Common mistakes to avoid

  • Using 2S/r for a soap bubble (which has two surfaces, so 4S/r), or forgetting the factor 2 in the work done on a soap film.
  • Mixing up absolute and gauge pressure: adding P0 when the question asks for gauge pressure, or leaving it out when it asks for absolute pressure.
  • Reversing the temperature trend: gas viscosity increases with temperature while liquid viscosity decreases.
  • Assuming that a capillary tube shorter than h overflows. It does not; the meniscus flattens instead.
Exam tip: For Bernoulli and continuity numericals, find the speeds from A1v1 = A2v2 first, then apply ΔP = ½ρ(v2² − v1²). For drop and bubble questions, count the number of free surfaces before choosing 2S/r or 4S/r.

Mechanical Properties of Fluids — solved practice questions

7 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    What is the gauge pressure at a depth of 10 m below the surface of water? Take ρ = 1000 kg/m³ and g = 10 m/s².

    • A1 × 106 Pa
    • B2 × 105 Pa
    • C1 × 104 Pa
    • D1 × 105 Pa
    Show answer & solution

    Correct answer: (D) 1 × 105 Pa

    Gauge pressure = ρgh = 1000 × 10 × 10 = 1 × 105 Pa.
  2. Q2mediumReport

    What is the absolute pressure at a depth of 5 m in an oil of density 800 kg/m³? Atmospheric pressure is 1.0 × 105 Pa and g = 10 m/s².

    • A1.4 × 105 Pa
    • B1.8 × 105 Pa
    • C4 × 104 Pa
    • D1.04 × 105 Pa
    Show answer & solution

    Correct answer: (A) 1.4 × 105 Pa

    P = P0 + ρgh = 1.0 × 105 + 800 × 10 × 5 = 1.0 × 105 + 0.4 × 105 = 1.4 × 105 Pa.
  3. Q3easyReport

    Three open vessels have the same base area but different shapes: one widens upward, one is a narrow cylinder, and one is a cone that narrows upward. All are filled with water to the same height. How does the pressure at the base compare?

    • AGreatest in the narrow cylinder
    • BGreatest in the vessel that widens upward
    • CIt depends on the volume of water in each vessel
    • DThe same in all three vessels
    Show answer & solution

    Correct answer: (D) The same in all three vessels

    Pressure at a depth is P0 + ρgh. It depends only on the height of the liquid column, not on the vessel's shape or the volume of liquid. This is the hydrostatic paradox.
  4. Q4mediumReport

    In a hydraulic lift, a car of mass 1000 kg rests on the large piston, which has an area of 0.5 m². The small piston has an area of 0.01 m². Taking g = 10 m/s², what force on the small piston will just support the car?

    • A2000 N
    • B100 N
    • C500 N
    • D200 N
    Show answer & solution

    Correct answer: (D) 200 N

    By Pascal's law, F1/A1 = F2/A2. F1 = 104 × (0.01/0.5) = 200 N.
  5. Q5mediumReport

    In a hydraulic press, the large piston's area is 25 times the small piston's area. The small piston is pushed down by 50 cm. How far does the large piston rise?

    • A2 cm
    • B0.4 cm
    • C10 cm
    • D25 cm
    Show answer & solution

    Correct answer: (A) 2 cm

    The liquid is incompressible, so the volume displaced is the same: a × 50 = 25a × x, giving x = 2 cm. The force is multiplied by 25 but the distance is divided by 25.
  6. Q6easyReport

    A mercury barometer reads 76 cm at sea level, and mercury is 13.6 times as dense as water. If water replaced the mercury, about how tall would the column be at the same atmospheric pressure?

    • A103 m
    • B1.03 m
    • C10.3 m
    • D0.76 m
    Show answer & solution

    Correct answer: (C) 10.3 m

    For the same pressure, ρ1h1 = ρ2h2. h(water) = 0.76 m × 13.6 ≈ 10.3 m.
  7. Q7easyReport

    Water flows steadily through a pipe. At a section of area 4 cm² its speed is 2 m/s. What is its speed at a section of area 1 cm²?

    • A8 m/s
    • B4 m/s
    • C2 m/s
    • D0.5 m/s
    Show answer & solution

    Correct answer: (A) 8 m/s

    By the equation of continuity, A1v1 = A2v2. v2 = (4 × 2)/1 = 8 m/s.

Ready to test yourself? Take the 22-question Mechanical Properties of Fluids test →