NEET (Medical) · Physics

Oscillations

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
15
medium
6
hard

Oscillations — quick revision notes

Covers periodic motion, the SHM equation x = A sin(ωt + φ), phase, velocity and acceleration in SHM, the link between SHM and uniform circular motion, energy in SHM, the spring-block system and the simple pendulum. NEET mostly asks direct numericals on period, maximum speed/acceleration and energy ratios, plus spring-combination, pendulum-in-a-lift and time-to-reach-a-position problems.
  • SHM condition: F = -kx, so a = -ω²x with ω = √(k/m); T = 2π/ω and f = 1/T
  • x = A sin(ωt + φ); v = ω√(A² - x²) (maximum Aω at the mean position); a = -ω²x, so |a| = ω²|x| (maximum ω²A at the extremes)
  • Velocity leads displacement by π/2; acceleration leads displacement by π (it is always opposite to displacement)
  • Energy: KE = ½k(A² - x²), PE = ½kx², total E = ½kA² = ½mω²A²; KE = PE at x = A/√2; KE and PE each oscillate at frequency 2f
  • Spring-block: T = 2π√(m/k), independent of g and amplitude; series 1/k = 1/k₁ + 1/k₂, parallel k = k₁ + k₂; cutting a spring into n equal parts makes each part's constant nk
  • Simple pendulum (small θ): T = 2π√(L/g), independent of mass and amplitude; in a lift accelerating up or down, use g_eff = g ± a; seconds pendulum T = 2 s, L ≈ 1 m
  • Time from the mean position to A/2 is T/12; from A/2 to A it is T/6; from mean to extreme it is T/4
  • The projection of uniform circular motion on a diameter is SHM with amplitude = radius and ω = the angular speed

Common mistakes to avoid

  • Taking 'velocity lags displacement'. In fact velocity LEADS displacement by π/2, and acceleration is π out of phase with it
  • Thinking amplitude affects the period of an ideal spring or a small-angle pendulum. It changes only the energy (E ∝ A²)
  • Using the time from A/2 to A as T/12. That is the time from mean to A/2; from A/2 to A takes T/6
  • Cutting a spring in half and halving k. The force constant actually doubles
Exam tip: Write x, v, a and E in terms of A and ω first, then substitute. Most NEET SHM numericals are one-line ratio problems (T ∝ √(m/k), T ∝ √(L/g), E ∝ A²).

Oscillations — solved practice questions

8 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    Which condition is both necessary and sufficient for a particle to execute simple harmonic motion (SHM)?

    • AThe speed of the particle is constant
    • BThe motion repeats itself after equal intervals of time
    • CThe restoring force is constant in magnitude and directed towards the mean position
    • DThe restoring force is proportional to displacement and directed towards the mean position (F = -kx)
    Show answer & solution

    Correct answer: (D) The restoring force is proportional to displacement and directed towards the mean position (F = -kx)

    SHM is defined by the force law F = -kx: the force is proportional to displacement and always points towards the mean position. Periodicity alone is not enough, because many periodic motions are not SHM.
  2. Q2easyReport

    The displacement of a particle is x = 5 sin(4πt + π/3) cm, where t is in seconds. What is the time period of the motion?

    • A0.25 s
    • B4 s
    • C2 s
    • D0.5 s
    Show answer & solution

    Correct answer: (D) 0.5 s

    ω = 4π rad/s, so T = 2π/ω = 2π/4π = 0.5 s.
  3. Q3easyReport

    A particle executes SHM with amplitude 4 cm and angular frequency 10 rad/s. Its maximum speed is

    • A0.04 m/s
    • B0.16 m/s
    • C0.4 m/s
    • D4 m/s
    Show answer & solution

    Correct answer: (C) 0.4 m/s

    v_max = Aω = 0.04 m × 10 rad/s = 0.4 m/s.
  4. Q4mediumReport

    A particle executes SHM with amplitude 2 cm and frequency 5 Hz. The magnitude of its maximum acceleration is

    • Aπ² m/s²
    • B20π² m/s²
    • C2π² m/s²
    • D0.2π² m/s²
    Show answer & solution

    Correct answer: (C) 2π² m/s²

    ω = 2πf = 10π rad/s, so a_max = ω²A = 100π² × 0.02 = 2π² m/s² (about 19.7 m/s²).
  5. Q5mediumReport

    A particle executes SHM with amplitude A and angular frequency ω. What is its speed when its displacement is A/2?

    • AAω/2
    • B(√3/2)Aω
    • CAω/4
    • DAω/√2
    Show answer & solution

    Correct answer: (B) (√3/2)Aω

    v = ω√(A² - x²) = ω√(A² - A²/4) = (√3/2)Aω.
  6. Q6mediumReport

    At what displacement from the mean position are the kinetic energy and potential energy of a particle in SHM (amplitude A) equal?

    • A(√3/2)A
    • BA/4
    • CA/2
    • DA/√2
    Show answer & solution

    Correct answer: (D) A/√2

    KE = PE means ½k(A² - x²) = ½kx², so 2x² = A² and x = A/√2.
  7. Q7mediumReport

    For a particle executing SHM with amplitude A, what is the ratio of kinetic energy to potential energy at displacement x = A/2?

    • A4 : 1
    • B1 : 1
    • C3 : 1
    • D1 : 3
    Show answer & solution

    Correct answer: (C) 3 : 1

    KE : PE = (A² - x²) : x² = (A² - A²/4) : A²/4 = 3 : 1.
  8. Q8easyReport

    A block of mass 1 kg is attached to a spring of force constant 100 N/m on a smooth horizontal surface. What is its time period of oscillation?

    • A0.02π s
    • B0.1π s
    • C0.2π s
    • D2π s
    Show answer & solution

    Correct answer: (C) 0.2π s

    T = 2π√(m/k) = 2π√(1/100) = 2π/10 = 0.2π s (about 0.63 s).

Ready to test yourself? Take the 22-question Oscillations test →