NEET (Medical) · Physics

Semiconductor Electronics: Materials, Devices and Simple Circuits

28 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
13
medium
6
hard

Semiconductor Electronics: Materials, Devices and Simple Circuits — quick revision notes

The chapter covers energy bands, intrinsic and extrinsic semiconductors, the p-n junction and its I-V characteristics, rectifiers, special-purpose diodes (Zener, LED, photodiode, solar cell) and the basic logic gates. NEET usually sets 1-2 questions from it: carrier-concentration and conductivity numericals, diode circuits with ideal or 0.7 V diodes, Zener regulator currents, and logic-gate truth tables.
  • Band gaps: diamond about 5.4 eV, Si about 1.1 eV, Ge about 0.7 eV. Metals have a partially filled conduction band or overlapping valence and conduction bands (Eg ≈ 0); insulators have Eg > 3 eV.
  • Mass-action law: ne·nh = ni2. In n-type, ne ≈ ND and nh = ni2/ND. In p-type, nh ≈ NA. Doped crystals stay electrically neutral.
  • Conductivity: σ = e(ne·µe + nh·µh) and ρ = 1/σ. Semiconductor resistivity falls as temperature rises (negative temperature coefficient).
  • Donors (n-type) are pentavalent: P, As, Sb. Acceptors (p-type) are trivalent: B, Al, Ga, In.
  • p-n junction: diffusion of majority carriers is balanced by drift of minority carriers. Forward bias narrows the depletion layer and reverse bias widens it. Reverse saturation current is minority-carrier current.
  • Rectifiers: half-wave output frequency = f, full-wave = 2f. A centre-tap full-wave rectifier gives load peak = half-secondary peak. The capacitor filter goes in parallel with the load.
  • Zener regulator: I(R series) = (Vin − Vz)/R, I(load) = Vz/RL, Iz = I(R series) − I(load). Iz(max) = Pmax/Vz. Photodiode and Zener work in reverse bias, the LED in forward bias, the solar cell with no bias (4th-quadrant I-V curve). λmax = 1240/Eg(eV) nm.
  • Logic gates: NAND = (AB)', NOR = (A + B)'. De Morgan: (A'B')' = A + B and (A' + B')' = AB. NAND and NOR are universal gates; shorting the inputs of either gives a NOT gate.

Common mistakes to avoid

  • Taking full-wave output frequency to be equal to the input frequency. It is double the input frequency.
  • Using the static ratio V/I instead of the dynamic resistance ΔV/ΔI from the diode characteristic.
  • Leaving the load current out of a Zener problem, or forgetting to check that the Zener is actually in breakdown (the open-circuit load voltage must exceed Vz).
  • Thinking doped n-type material is negatively charged, or that adding donors raises the hole concentration. Holes actually fall to ni2/ND.
Exam tip: In any diode circuit, first decide which diodes are forward biased and treat reverse-biased ones as open circuits. For logic-gate circuits, simplify with De Morgan or test all four input combinations before choosing an option.

Semiconductor Electronics: Materials, Devices and Simple Circuits — solved practice questions

7 NEET Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    Which of the following correctly orders the energy band gaps of diamond (C), silicon (Si) and germanium (Ge)?

    • AGe > Si > C
    • BC > Ge > Si
    • CC > Si > Ge
    • DSi > C > Ge
    Show answer & solution

    Correct answer: (C) C > Si > Ge

    The typical band gaps are diamond about 5.4 eV, Si about 1.1 eV and Ge about 0.7 eV, so C > Si > Ge.
  2. Q2mediumReport

    An intrinsic semiconductor has intrinsic carrier concentration ni = 1.5 × 1016 m−3. It is doped with donor atoms of concentration 4.5 × 1022 m−3, all of them ionised. What is the hole concentration in thermal equilibrium?

    • A3.3 × 10−7 m−3
    • B1.5 × 1016 m−3
    • C5.0 × 109 m−3
    • D3.0 × 106 m−3
    Show answer & solution

    Correct answer: (C) 5.0 × 109 m−3

    ne ≈ ND = 4.5 × 1022 m−3 and ne·nh = ni2, so nh = (2.25 × 1032)/(4.5 × 1022) = 5 × 109 m−3.
  3. Q3mediumReport

    Pure silicon has 5 × 1028 atoms m−3. It is doped with arsenic at 1 ppm (one As atom per 106 Si atoms). Take ni = 1.5 × 1016 m−3. What is the number density of holes?

    • A1.5 × 1016 m−3
    • B4.5 × 109 m−3
    • C2.25 × 1010 m−3
    • D5 × 1022 m−3
    Show answer & solution

    Correct answer: (B) 4.5 × 109 m−3

    ND = 5 × 1028 × 10−6 = 5 × 1022 m−3 ≈ ne, so nh = ni2/ne = (2.25 × 1032)/(5 × 1022) = 4.5 × 109 m−3.
  4. Q4easyReport

    In an n-type semiconductor the majority carriers are electrons. Taken as a whole, the n-type semiconductor is:

    • Acharged, with a sign that depends on temperature
    • Bnegatively charged
    • Celectrically neutral
    • Dpositively charged
    Show answer & solution

    Correct answer: (C) electrically neutral

    Each free electron comes from a neutral donor atom that is left as a fixed positive ion, so the total charge stays zero and the crystal is neutral.
  5. Q5easyReport

    Adding which impurity to pure germanium produces a p-type semiconductor?

    • AArsenic
    • BPhosphorus
    • CAntimony
    • DIndium
    Show answer & solution

    Correct answer: (D) Indium

    Indium is trivalent (group 13), so it acts as an acceptor and creates holes. As, P and Sb are pentavalent donors that give n-type material.
  6. Q6easyReport

    As the temperature of a pure semiconductor rises, its resistivity:

    • Adecreases, because the number of charge carriers increases rapidly
    • Bstays constant
    • Cincreases, because the carriers collide more often
    • Dfirst increases and then decreases
    Show answer & solution

    Correct answer: (A) decreases, because the number of charge carriers increases rapidly

    Heating excites many more electrons across the band gap. This rise in carrier density outweighs the small fall in mobility, so resistivity falls; semiconductors have a negative temperature coefficient of resistance.
  7. Q7mediumReport

    A photodiode is made from a semiconductor with band gap 2.48 eV. Take hc = 1240 eV nm. What is the longest wavelength of light it can detect?

    • A500 nm
    • B1000 nm
    • C620 nm
    • D250 nm
    Show answer & solution

    Correct answer: (A) 500 nm

    Detection needs photon energy hc/λ ≥ Eg, so λmax = 1240/2.48 = 500 nm.

Ready to test yourself? Take the 21-question Semiconductor Electronics: Materials, Devices and Simple Circuits test →