Physics
24 chapters · 692 practice questions with full solutions · 3 visual explainers — all free.
Reviewed by Kaustav Basak (19 years teaching)Written with AI help
How it's tested: in JEE Main 2026 Paper 1 (B.E./B.Tech.), the Physics (Section A: 20 MCQs + Section B: 5 numerical-answer questions) section has 25 questions for 100 marks. Syllabus & exam pattern →
Full Physics section test
40 questions across the whole section · 40 min · one timed test
Kinematics
Kinematics describes motion without asking what causes it: displacement, velocity and acceleration in one dimension, relative velocity, projectile motion and uniform circular motion. JEE Main tests it through the equations of motion, calculus-based motion (acceleration given as a function of t, x or v), projectile formulas, river-boat and rain-man relative velocity, and graph interpretation.
Exam tip: Fix one sign convention (for example, upward positive) before writing any equation, and check whether the acceleration is constant before using the three equations of motion.
29 questionsPractice testLaws of Motion
Laws of Motion covers Newton's three laws, momentum and impulse, conservation of linear momentum, equilibrium of concurrent forces, friction, connected bodies and the dynamics of circular motion on level and banked roads. JEE Main mostly sets free-body-diagram problems: pulleys and blocks, contact forces, static versus kinetic friction, lifts and pseudo-forces, and momentum conservation in recoil and explosions.
Exam tip: Draw a separate free-body diagram for every block, take axes along the acceleration, write ΣF = ma for each, and check the result with a limiting case such as μ = 0 or one mass tending to zero.
29 questionsPractice testExplainerUnits & Measurements
This chapter covers SI units, dimensions and dimensional analysis, significant figures, errors in measurement, and reading instruments such as the vernier callipers and screw gauge. JEE Main asks about it in almost every shift, usually on dimensional formulas of constants, finding exponents by dimensional analysis, error propagation, and least count with zero-error correction.
Exam tip: For any dimensions question, first write a defining formula for the quantity (F = ma, E = hν, F = Gm₁m₂/r²) and substitute; it is faster and safer than recalling long lists.
29 questionsPractice testExplainerWork, Energy and Power
Work, Energy and Power covers work done by constant and variable forces, kinetic and potential energy, the work-energy theorem, conservative forces and potential-energy curves, power, collisions and motion in a vertical circle. JEE Main tests it through energy-conservation shortcuts, elastic and inelastic collision formulas, variable-force integrals and vertical-circle conditions.
Exam tip: Whenever a problem links speeds at two positions, go straight to energy (or the work-energy theorem if friction acts) instead of finding forces and acceleration.
29 questionsPractice testGravitation
Gravitation covers Newton's law of gravitation, the acceleration due to gravity and its variation, Kepler's laws, gravitational potential and potential energy, escape speed and satellite motion. JEE Main tests it through short numericals on the variation of g, orbital speed, period and energy, and energy or angular-momentum conservation in a 1/r field.
Exam tip: In any orbit or projection problem, write energy conservation (and angular momentum conservation for ellipses) first and replace GM by gR². Most JEE gravitation numericals then take one line of algebra.
29 questionsPractice testExplainerRotational Motion
This chapter covers centre of mass, torque, angular momentum, moment of inertia (with the parallel and perpendicular axis theorems), rotational dynamics, equilibrium of rigid bodies and rolling motion. JEE Main asks moment-of-inertia calculations, τ = Iα problems with pulleys, angular momentum conservation, and rolling energy and acceleration.
Exam tip: Before any rolling or pulley question, write down K²/R² for the body (ring 1, disc 1/2, solid sphere 2/5, hollow sphere 2/3). Most answers follow directly from that number.
29 questionsPractice testThermodynamics
This chapter covers thermal equilibrium and the laws of thermodynamics, work and heat in quasi-static processes of an ideal gas, molar specific heats, heat engines, refrigerators and the Carnot cycle. JEE Main asks P–V work (area under the curve), first-law bookkeeping for isothermal, adiabatic, isobaric and isochoric processes, and efficiency or COP numericals.
Exam tip: In any process question, first write ΔU = nCvΔT (true for every process of an ideal gas), then get W from the area under the P–V curve, and let the first law give Q.
29 questionsPractice testProperties of Solids and Liquids
This chapter covers elasticity (stress, strain, the moduli and Poisson's ratio), fluid statics and dynamics (Pascal, Archimedes, continuity, Bernoulli, Torricelli, viscosity and Stokes' law), surface tension and capillarity, and thermal properties (expansion, calorimetry, conduction, radiation, Newton's cooling). JEE Main usually sets 1–2 short numericals from it, most often on Young's modulus, Bernoulli or efflux, terminal velocity, bubble excess pressure, capillary rise, mixing with phase change, and series/parallel conduction. Newton's law of cooling, Poisson's ratio and elastic energy density are not explicitly listed in the current JEE Main syllabus, but they still appear occasionally, so revise them briefly.
Exam tip: For fluid-flow questions, write continuity first and then Bernoulli between the same two points. For calorimetry, always check the 0 °C or 100 °C 'limit' case before writing a heat balance.
30 questionsPractice testKinetic Theory of Gases
This chapter covers the ideal-gas equation, the kinetic interpretation of pressure and temperature, molecular speeds (rms, average, most probable), degrees of freedom and equipartition, specific heats of gases and their mixtures, and mean free path. JEE Main usually sets one question, typically on speed ratios, γ of a gas mixture, internal energy, or the dependence of mean free path.
Exam tip: Memorise f for each molecule type and derive Cv, Cp and γ from f. Almost every specific-heat or energy question in this chapter reduces to counting degrees of freedom correctly.
30 questionsPractice testOscillations
This chapter covers periodic motion and SHM: its kinematics, energy, spring–mass systems, simple and physical pendulums, and liquid and floating-body oscillations. It also covers superposition of SHMs, and briefly mentions damped and forced oscillations, which are no longer in the JEE Main syllabus. JEE Main mostly asks for the time period of a system (spring combinations, effective g, physical pendulums), energy fractions, phase and time calculations, and amplitude changes when mass is added.
Exam tip: For any new system, write the restoring force as F = −(constant)x, or the torque as −(constant)θ, and read off ω² = constant/inertia. This one method covers springs, pendulums, liquids and tunnels.
27 questionsPractice testWaves
This chapter covers transverse and longitudinal progressive waves and the speed of waves on strings, in solids and in gases. It also covers superposition, interference, reflection, standing waves on strings and in organ pipes, resonance tubes, beats, and the Doppler effect (beyond the JEE Main 2026 syllabus; background only). JEE Main asks numericals on harmonics and overtones, beats with loading or filing, the resonance tube, and reading the wave equation.
Exam tip: For pipes and strings, sketch the node–antinode pattern and write L as a multiple of λ/4 before using any formula. It prevents almost every harmonic and overtone mistake.
26 questionsPractice testElectrostatics: Charges, Fields and Gauss's Law
This chapter covers charge and its properties (quantisation, conservation), Coulomb's law and superposition, the electric field of point charges, dipoles and continuous charge distributions, the behaviour of a dipole in a field, and Gauss's law with its standard applications. JEE Main mostly asks short numericals on null points, net force or field from charge arrangements, dipole torque and energy, and flux through cube faces, plus Gauss's-law field results for spheres, lines and sheets.
Exam tip: For any symmetric charge arrangement, first find which components cancel by symmetry, then add only what survives. For flux questions, imagine extra copies of the cube that would fully enclose the charge (8 cubes for a corner, 4 for an edge, 2 for a face).
29 questionsPractice testElectrostatic Potential and Capacitance
This chapter covers electric potential and potential energy of point charges, dipoles and spheres; the field–potential relation E = −∇V; equipotentials; conductors; capacitors (parallel-plate, spherical, with dielectrics); series and parallel combinations; energy stored; and charge sharing. JEE Main favours numericals on capacitor networks, dielectric insertion with and without the battery, energy loss on sharing, and finding E from a given V(x, y).
Exam tip: Before any capacitor-change problem, write down which quantity is fixed (Q or V), then use the form of U that contains it (Q²/2C or ½CV²). For networks, look for balanced-bridge symmetry before solving with junction equations.
29 questionsPractice testCurrent Electricity
This chapter covers current, drift velocity and mobility, Ohm's law, resistivity and how it depends on temperature, series and parallel resistors, emf and internal resistance, combinations of cells, Kirchhoff's laws, the Wheatstone bridge and the metre bridge, and electrical power and energy. JEE Main usually sets 1–2 numericals on it, often on equivalent resistance, Kirchhoff networks, cell combinations or stretched wires.
Exam tip: For any network, first look for symmetry or a balanced bridge to remove resistors, then apply the junction rule with one unknown node voltage instead of writing several loop equations. Check every answer with the power or current balance at a node.
29 questionsPractice testMagnetic Effects of Current
This chapter covers the Biot–Savart law (straight wire, loop, arc and axis fields), Ampère's law (long wire, solid cylinder, solenoid), the Lorentz force on moving charges (circles, helices, the velocity selector), forces on current-carrying conductors and between parallel currents, torque on a current loop and its magnetic moment, and the moving-coil galvanometer with its conversion to an ammeter or voltmeter. JEE Main typically asks 1–2 questions, often combined geometry fields, radius or pitch ratios, and galvanometer conversion.
Exam tip: For composite wire shapes, split the wire into straight pieces and arcs, use the standard results with careful right-hand-rule signs, and add the pieces as vectors. For particle motion, write r, T and the pitch first, then form ratios.
30 questionsPractice testMagnetism and Matter
Covers the bar magnet as a magnetic dipole (axial and equatorial fields, torque, potential energy, oscillations), Gauss's law for magnetism, magnetisation, H and susceptibility, and dia-, para- and ferromagnetism with Curie's law. The Earth's field (declination, dip, H) and hysteresis are no longer in the JEE Main syllabus; treat them as background only. JEE Main usually sets 1–2 questions: short numericals on dipole fields and oscillation periods, plus conceptual or statement-type questions on classifying materials and on how temperature affects them.
Exam tip: Memorise how m, I and T scale when a magnet is cut, bent or stacked, because these questions are quick marks. For material questions, classify by the sign and size of χ and how it depends on temperature.
20 questionsPractice testElectromagnetic Induction
Covers Faraday's and Lenz's laws, motional emf (sliding and rotating rods, loops entering or leaving a field), induced electric fields, eddy currents, self- and mutual inductance, energy stored in an inductor, LR growth and decay, and the AC generator. JEE Main sets 1–2 questions every shift, mostly numericals on rods on rails, the charge that flows (q = NΔΦ/R), inductance formulas and LR transients.
Exam tip: For any moving-conductor problem, find ε = Bvl, then I = ε/R, then the force BIl and the power F·v = I²R. That one chain answers most JEE Main questions here. For charge flow, use q = NΔΦ/R directly, with no time needed.
30 questionsPractice testAlternating Current
This chapter covers rms and average values, the behaviour of R, L and C in AC circuits, phasors, series LCR impedance, resonance and the Q-factor, power and power factor, LC oscillations and transformers. JEE Main asks mostly short numericals on impedance, phase, power, resonance and rms values, plus LC energy-sharing and transformer questions.
Exam tip: For any series LCR numerical, first write X_L, X_C, Z and cos φ in one line; almost every quantity follows from these four. Quickly check that the resonance and Q values are consistent with one another.
30 questionsPractice testElectromagnetic Waves
This chapter covers displacement current and the Ampere–Maxwell law, the properties of plane EM waves (c = 1/√(μ₀ε₀), E₀ = cB₀, transverse nature), energy density, intensity, momentum and radiation pressure, and the EM spectrum with its uses. JEE Main asks one or two questions: wave-equation reading (amplitude, wavelength, direction of B), intensity and energy-density numericals, radiation pressure, and spectrum ordering or match-the-column items.
Exam tip: When given a wave equation, read off the amplitude, k and ω, then compute v = ω/k as a check before finding λ, f or the other field. Fix the direction of B using E × B ∥ the propagation direction.
30 questionsPractice testRay Optics and Optical Instruments
Covers reflection at plane and spherical mirrors, refraction (Snell's law, apparent depth, total internal reflection), refraction at spherical surfaces, thin lenses and the lens-maker formula, lens combinations, prisms and dispersion, the eye, and optical instruments (microscopes and telescopes). JEE Main mostly asks sign-convention numericals on mirrors and lenses, silvered lenses, prism minimum deviation, and magnifying power of instruments.
Exam tip: Solve every mirror or lens numerical with a fixed Cartesian sign table, and check the image nature (real/virtual, erect/inverted) against the ray-diagram case before ticking. For instruments, first note where the final image is (D or infinity), because that decides the formula.
30 questionsPractice testWave Optics
Covers wavefronts and Huygens' principle (deriving reflection and refraction), coherent sources and sustained interference, Young's double-slit experiment (fringe width, intensity, effect of a medium or a thin film), single-slit diffraction, and polarisation (Malus's law, Brewster's law, Polaroids). JEE Main questions are short numericals on β, fringe position and shift, intensity ratios, central-maximum width, and Malus/Brewster calculations, plus conceptual statement-type items.
Exam tip: Write every YDSE question in terms of the path difference Δ = yd/D (plus (μ − 1)t if there is a film) and compare it with λ. That handles fringe position, shift and intensity with one idea. For polaroids, apply cos² step by step after halving the unpolarised light.
29 questionsPractice testDual Nature of Matter and Radiation
This chapter covers the particle nature of light (photons, the photoelectric effect, Einstein's equation) and the wave nature of matter (de Broglie waves, the Davisson–Germer experiment). JEE Main usually asks direct numericals on stopping potential, threshold wavelength and de Broglie wavelength ratios, and graph-based questions on photocurrent against potential or frequency.
Exam tip: Learn hc = 1240 eV·nm and λₑ = 1.227/√V nm; together they settle most numericals in under a minute. For ratio questions, write λ = h/√(2mK) first and cancel common terms.
30 questionsPractice testAtoms and Nuclei
This chapter covers Rutherford scattering, the Bohr model and hydrogen spectral series, nuclear size and density, mass defect and binding energy, radioactive decay laws, and fission and fusion. JEE Main asks Bohr-model ratio and spectrum numericals, half-life and activity calculations, decay-series counting, and Q-value or binding-energy problems.
Exam tip: For Bohr-model questions, write the dependence on n and Z first (r ∝ n²/Z, v ∝ Z/n, E ∝ Z²/n², T ∝ n³/Z²) and work with ratios. For decay questions, count half-lives instead of using logarithms whenever the times are whole multiples of T½.
30 questionsPractice testElectronic Devices
This chapter covers energy bands, intrinsic and extrinsic semiconductors, the p-n junction (depletion layer, biasing), diode applications (rectifiers, Zener regulator), optoelectronic devices (LED, photodiode, solar cell) and logic gates. JEE Main usually asks 1–2 questions on it: carrier-concentration and conductivity numericals, Zener or diode circuit currents, band gap to wavelength conversions, and truth tables of gate combinations.
Exam tip: For gate combinations, write the Boolean expression and reduce it with De Morgan's theorems, then check all four input rows. For diode circuits, first decide which diodes are on before applying Ohm's law.
30 questionsPractice test
Physics: solved examples
A taste of each chapter's practice set — try it, then open the answer and solution.
- Kinematics
A boat covers a distance L downstream in time t1 and the same distance upstream in time t2. If v is the boat's speed in still water and u the stream speed, then:
- Av = L/(t1 + t2)
- Bv = L(1/t1 + 1/t2)
- Cv = (L/2)(1/t1 + 1/t2)
- Dv = (L/2)(1/t1 - 1/t2)
Show answer & solution
Correct answer: (C) v = (L/2)(1/t1 + 1/t2)
Downstream speed is (v+u) = L/t1 and upstream speed is (v-u) = L/t2. Adding and dividing by 2 gives v = (L/2)(1/t1 + 1/t2).
- Laws of Motion
Two blocks of masses 2 kg and 3 kg are placed in contact on a frictionless horizontal surface. A horizontal force of 10 N is applied to the 2 kg block, pushing both blocks together. The force exerted by the 2 kg block on the 3 kg block is:
- A10 N
- B5 N
- C6 N
- D4 N
Show answer & solution
Correct answer: (C) 6 N
Common acceleration a = F/(m₁ + m₂) = 10/5 = 2 m/s². The only horizontal force on the 3 kg block is the contact force N, so N = 3 × 2 = 6 N. (4 N is the net force on the 2 kg block: 10 − 6 = 4 N.)
- Units & Measurements
Following the standard rounding-off rules for significant figures (as given in NCERT), the number 2.745 rounded off to three significant figures is:
- A2.75
- B2.7
- C2.74
- D2.745
Show answer & solution
Correct answer: (C) 2.74
The digit to be dropped is 5 with nothing after it. The rule: if the preceding digit is even, it is left unchanged; if it is odd, it is increased by 1. Here the preceding digit is 4 (even), so 2.745 → 2.74. (By the same rule, 2.735 → 2.74.)