JEE (Main + Adv) · Physics
Magnetism and Matter
20 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Magnetism and Matter — quick revision notes
- Short dipole: B_axial = (μ₀/4π)(2m/r³) and B_equatorial = (μ₀/4π)(m/r³), opposite to m. At a general point, B = (μ₀/4π)(m/r³)√(1 + 3cos²θ).
- Torque τ = m × B, so τ = mB sin θ. Potential energy U = −m·B. Work to turn from θ₁ to θ₂: W = mB(cos θ₁ − cos θ₂).
- Oscillation period T = 2π√(I/(mB)). Cutting a magnet transversely into n parts gives m/n and I/n³, so T becomes T/n. Sum-difference method: T₁²/T₂² = (m₁ − m₂)/(m₁ + m₂).
- Current loop: m = NIA. Orbiting electron: μ/L = e/2mₑ. Bohr magneton μ_B = eh/(4πmₑ) ≈ 9.27 × 10⁻²⁴ A m².
- Earth's field: H = B cos δ, Z = B sin δ, tan δ = Z/H. Apparent dip: tan δ' = tan δ/cos α. For two perpendicular planes, cot²δ = cot²δ₁ + cot²δ₂. (beyond the JEE Main 2026 syllabus; background only; keep H = B cos δ in mind only for older PYQs)
- B = μ₀(H + M), M = χH, μᵣ = 1 + χ. Inside a solenoid, H = nI regardless of the core.
- Diamagnet: χ small and negative, independent of T (superconductor χ = −1). Paramagnet: χ small and positive, χ = C/T (Curie). Ferromagnet: χ very large; above T_c, χ = C/(T − T_c).
- Hysteresis loss per cycle = loop area × volume. Permanent magnets need high retentivity and high coercivity. Electromagnet and transformer cores need low coercivity, high permeability and a narrow loop. (beyond the JEE Main 2026 syllabus; background only)
Common mistakes to avoid
- Using the axial-field formula at an equatorial point, or forgetting that the equatorial field is antiparallel to m (this matters for neutral points).
- Taking dip from the horizontal component wrongly: B = H/cos δ, not H cos δ. Confusing declination (horizontal angle) with dip (vertical angle). (beyond the JEE Main 2026 syllabus; background only)
- Thinking the force between two dipoles goes as 1/r³. It goes as 1/r⁴. Also assuming a cut or bent magnet keeps the same moment.
- Applying Curie's law to diamagnets, or forgetting that χ = μᵣ − 1, not μᵣ.
Magnetism and Matter — solved practice questions
5 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
For a short bar magnet, what is the ratio of the magnetic field at a point on its axis to the field at a point on its equatorial line, both at the same distance r from the centre?
- A1 : 1
- B2 : 1
- C1 : 2
- D4 : 1
Show answer & solution
Correct answer: (B) 2 : 1
B_axial = (μ₀/4π)(2m/r³) and B_equatorial = (μ₀/4π)(m/r³), so the ratio is 2 : 1. - Q2mediumReport
A short bar magnet has magnetic moment 0.4 A m². What is the magnitude of its magnetic field at a point on its axis 20 cm from its centre?
- A1 × 10⁻⁵ T
- B2 × 10⁻⁵ T
- C1 × 10⁻⁴ T
- D5 × 10⁻⁶ T
Show answer & solution
Correct answer: (A) 1 × 10⁻⁵ T
B = (μ₀/4π)(2m/r³) = 10⁻⁷ × 0.8/(0.2)³ = 10⁻⁷ × 100 = 1 × 10⁻⁵ T. - Q3easyReport
A bar magnet of magnetic moment 2 A m² is placed in a uniform magnetic field of 0.5 T with its axis at 30° to the field. What torque acts on it?
- A0.25 N m
- B0.87 N m
- C0.5 N m
- D1.0 N m
Show answer & solution
Correct answer: (C) 0.5 N m
τ = mB sin θ = 2 × 0.5 × sin 30° = 0.5 N m. - Q4mediumReport
A magnet of moment 4 A m² is lined up with a uniform field of 0.2 T (stable equilibrium). How much work is needed to turn it slowly through 60°?
- A1.6 J
- B0.69 J
- C0.4 J
- D0.8 J
Show answer & solution
Correct answer: (C) 0.4 J
W = mB(cos 0° − cos 60°) = 4 × 0.2 × (1 − 0.5) = 0.4 J. - Q5easyReport
Gauss's law for magnetism states that:
- Athe magnetic flux through a closed surface equals μ₀ times the enclosed pole strength
- Bthe net magnetic flux through any closed surface is zero
- Cthe magnetic flux through any open surface is zero
- Dthe line integral of B around a closed loop is zero
Show answer & solution
Correct answer: (B) the net magnetic flux through any closed surface is zero
∮B·dA = 0 because isolated magnetic monopoles do not exist. Every field line that enters a closed surface also leaves it.
Ready to test yourself? Take the 15-question Magnetism and Matter test →