JEE (Main + Adv) · Physics

Electrostatic Potential and Capacitance

29 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
15
medium
7
hard

Electrostatic Potential and Capacitance — quick revision notes

This chapter covers electric potential and potential energy of point charges, dipoles and spheres; the field–potential relation E = −∇V; equipotentials; conductors; capacitors (parallel-plate, spherical, with dielectrics); series and parallel combinations; energy stored; and charge sharing. JEE Main favours numericals on capacitor networks, dielectric insertion with and without the battery, energy loss on sharing, and finding E from a given V(x, y).
  • V = kq/r (scalar, so add algebraically); U = kq₁q₂/r per pair (n charges give n(n − 1)/2 pairs); W = qΔV.
  • E = −dV/dr, i.e. Eₓ = −∂V/∂x; V_A − V_B = ∫ from A to B of E·dl. E is perpendicular to equipotentials and points towards decreasing V.
  • Conducting sphere: V = kQ/R throughout the inside. Uniform solid sphere: V_centre = 3kQ/(2R) = 1.5 V_surface. Isolated sphere capacitance C = 4πε₀R.
  • Parallel plate: C = Kε₀A/d; with a slab of thickness t, C = ε₀A/(d − t + t/K); a metal slab is the K → ∞ case, giving C = ε₀A/(d − t).
  • Series: 1/C = Σ 1/Cᵢ (same Q). Parallel: C = Σ Cᵢ (same V). Layered dielectrics act in series; side-by-side dielectrics act in parallel.
  • Energy: U = ½CV² = Q²/(2C) = ½QV; energy density u = ½ε₀E²; plate force F = Q²/(2ε₀A).
  • Battery disconnected, dielectric added: Q fixed; V, E and U all fall by K. Battery connected: V fixed; Q and U rise by K.
  • Charge sharing: V_common = (C₁V₁ ± C₂V₂)/(C₁ + C₂); energy loss = ½[C₁C₂/(C₁ + C₂)](V₁ ∓ V₂)². Connected spheres: q ∝ r, σ ∝ 1/r.

Common mistakes to avoid

  • Mixing up the two cases: with the battery connected V stays constant, after disconnecting Q stays constant. This decides whether U rises or falls.
  • Forgetting the minus sign in E = −∇V, or adding potentials as vectors.
  • When opposite plates are joined during charge sharing, subtracting the charges (Q₁ − Q₂) but still adding the capacitances.
  • Counting pairs wrongly in system potential energy (a square has 6 pairs: 4 sides and 2 diagonals).
Exam tip: Before any capacitor-change problem, write down which quantity is fixed (Q or V), then use the form of U that contains it (Q²/2C or ½CV²). For networks, look for balanced-bridge symmetry before solving with junction equations.

Electrostatic Potential and Capacitance — solved practice questions

7 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    The electric potential at a point 0.3 m from a point charge of 5 nC is (k = 9 × 10⁹ SI):

    • A150 V
    • B45 V
    • C1500 V
    • D500 V
    Show answer & solution

    Correct answer: (A) 150 V

    V = kq/r = 9×10⁹ × 5×10⁻⁹ / 0.3 = 45/0.3 = 150 V.
  2. Q2easyReport

    How much work is done in moving a charge of 2 μC between two points whose potential difference is 50 V?

    • A1 mJ
    • B4 μJ
    • C25 μJ
    • D100 μJ
    Show answer & solution

    Correct answer: (D) 100 μJ

    W = qΔV = 2×10⁻⁶ × 50 = 10⁻⁴ J = 100 μJ.
  3. Q3mediumReport

    Three charges of 1 μC each are placed at the vertices of an equilateral triangle of side 10 cm. The electrostatic potential energy of the system is:

    • A0.18 J
    • B0.81 J
    • C0.27 J
    • D0.09 J
    Show answer & solution

    Correct answer: (C) 0.27 J

    There are 3 pairs, each at distance a: U = 3kq²/a = 3 × 9×10⁹ × 10⁻¹² / 0.1 = 3 × 0.09 = 0.27 J.
  4. Q4mediumReport

    A short dipole has moment 2 × 10⁻⁹ C m. The electric potential at a point on its axis 0.3 m from its centre is:

    • Azero
    • B200 V
    • C100 V
    • D60 V
    Show answer & solution

    Correct answer: (B) 200 V

    On the axis, V = kp/r² = 9×10⁹ × 2×10⁻⁹ / 0.09 = 18/0.09 = 200 V. On the equatorial line V would be zero.
  5. Q5mediumReport

    The electric potential in a region is V = 3x²y − y³ volt, with x and y in metres. The magnitude of the electric field at the point (1 m, 2 m) is:

    • A15 V/m
    • B9 V/m
    • C12 V/m
    • D21 V/m
    Show answer & solution

    Correct answer: (A) 15 V/m

    Eₓ = −∂V/∂x = −6xy = −12 V/m. E_y = −∂V/∂y = −(3x² − 3y²) = −(3 − 12) = 9 V/m. |E| = √(144 + 81) = 15 V/m.
  6. Q6easyReport

    Which statement about equipotential surfaces is correct?

    • AThe electric field is tangent to an equipotential surface
    • BTwo different equipotential surfaces can intersect
    • CAround a point charge, equipotential surfaces are equally spaced for equal steps of potential
    • DNo work is done in moving a test charge along an equipotential surface
    Show answer & solution

    Correct answer: (D) No work is done in moving a test charge along an equipotential surface

    Along an equipotential ΔV = 0, so W = qΔV = 0. The field is perpendicular to the surface, surfaces never intersect, and around a point charge they get farther apart as r increases.
  7. Q7mediumReport

    A conducting sphere of radius 10 cm is charged to a potential of 900 V. The potentials at 5 cm and at 30 cm from its centre are respectively:

    • A450 V and 300 V
    • B900 V and 100 V
    • C1800 V and 300 V
    • D900 V and 300 V
    Show answer & solution

    Correct answer: (D) 900 V and 300 V

    Inside a conductor V is constant and equal to the surface value, 900 V. Outside, V = kQ/r ∝ 1/r, so V(30 cm) = 900 × (10/30) = 300 V.

Ready to test yourself? Take the 22-question Electrostatic Potential and Capacitance test →