JEE (Main + Adv) · Physics
Electromagnetic Waves
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electromagnetic Waves — quick revision notes
- Displacement current I_d = ε₀ dΦ_E/dt = C dV/dt, equal to the conduction current while a capacitor charges. Ampere–Maxwell law: ∮B·dl = μ₀(I_c + ε₀ dΦ_E/dt).
- Between circular capacitor plates (radius R, current I): B = μ₀I r/(2πR²) for r < R and B = μ₀I/(2πr) for r > R.
- c = 1/√(μ₀ε₀) = 3×10⁸ m/s. In a medium, v = c/√(μ_rε_r) and n = √(μ_rε_r).
- E₀ = cB₀, with E and B in phase and mutually perpendicular. E × B points along the propagation direction. For E = E₀ sin(kx − ωt), v = ω/k and λ = 2π/k.
- Average energy density u = ½ε₀E₀² = B₀²/(2μ₀). The electric and magnetic shares are equal (¼ε₀E₀² each). Intensity I = ½cε₀E₀² = cε₀E_rms².
- Momentum p = U/c. Radiation pressure = I/c for a perfect absorber and 2I/c for a perfect reflector (normal incidence). Point source: I = P/(4πr²).
- Spectrum in order of increasing λ: γ-rays < X-rays < UV < visible (400–700 nm) < IR < microwaves < radio waves.
- Uses: γ-rays for cancer treatment, X-rays for bone imaging, UV for sterilisation and LASIK (absorbed by ozone), IR for remotes, night vision and the greenhouse effect, microwaves for radar and ovens, radio waves for broadcasting.
Common mistakes to avoid
- Forgetting the factor ½ in I = ½cε₀E₀², or mixing peak and rms fields.
- Getting the direction of B wrong, especially when the wave moves along −axis because of a phase like (kz + ωt).
- Using p = U/c for a reflecting surface instead of 2U/c.
- Treating the electric and magnetic energy densities as unequal: they are always equal on average.
Electromagnetic Waves — solved practice questions
8 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
Which expression gives the displacement current introduced by Maxwell?
- Aμ₀ dΦ_E/dt
- B(1/ε₀) dΦ_E/dt
- Cε₀ dΦ_E/dt
- Dε₀ dΦ_B/dt
Show answer & solution
Correct answer: (C) ε₀ dΦ_E/dt
I_d = ε₀ dΦ_E/dt, where Φ_E is the electric flux. It adds to the conduction current in the Ampere–Maxwell law. - Q2mediumReport
The potential difference across a 2 μF capacitor changes at the rate of 10⁶ V/s. What is the displacement current between its plates?
- A2 A
- B20 A
- C2 μA
- D0.5 A
Show answer & solution
Correct answer: (A) 2 A
I_d = ε₀A dE/dt = C dV/dt = 2×10⁻⁶ × 10⁶ = 2 A. This equals the conduction current in the connecting wires. - Q3easyReport
What is the speed of electromagnetic waves in vacuum?
- A1/(μ₀ε₀)
- B1/√(μ₀ε₀)
- Cμ₀/ε₀
- D√(μ₀ε₀)
Show answer & solution
Correct answer: (B) 1/√(μ₀ε₀)
Maxwell's equations give c = 1/√(μ₀ε₀) ≈ 3 × 10⁸ m/s. - Q4mediumReport
An electromagnetic wave travels in a non-magnetic medium (μ_r = 1) of relative permittivity ε_r = 4. What is its speed in the medium?
- A1.5 × 10⁸ m/s
- B6 × 10⁸ m/s
- C3 × 10⁸ m/s
- D0.75 × 10⁸ m/s
Show answer & solution
Correct answer: (A) 1.5 × 10⁸ m/s
v = c/√(μ_rε_r) = 3×10⁸/√4 = 1.5 × 10⁸ m/s. - Q5mediumReport
The electric field amplitude of a plane electromagnetic wave in vacuum is 300 V/m. What is the amplitude of its magnetic field?
- A0.1 μT
- B1 mT
- C1 μT
- D10 μT
Show answer & solution
Correct answer: (C) 1 μT
B₀ = E₀/c = 300/(3×10⁸) = 10⁻⁶ T = 1 μT. - Q6mediumReport
A plane electromagnetic wave in vacuum has an electric field amplitude of 300 V/m. What is its average intensity? (ε₀ = 8.85 × 10⁻¹² C²/N·m²)
- A≈ 60 W/m²
- B≈ 119 W/m²
- C≈ 1195 W/m²
- D≈ 239 W/m²
Show answer & solution
Correct answer: (B) ≈ 119 W/m²
I = ½cε₀E₀² = 0.5 × 3×10⁸ × 8.85×10⁻¹² × 9×10⁴ ≈ 119.5 W/m². The value 239 W/m² forgets the factor ½. - Q7mediumReport
The electric field of a plane electromagnetic wave in vacuum is E = E₀ sin(kz − ωt) x̂. Along which direction does its magnetic field oscillate?
- A−ŷ
- B+ŷ
- C+ẑ
- D+x̂
Show answer & solution
Correct answer: (B) +ŷ
The wave travels along +z, and E × B must point along the propagation direction. Since x̂ × ŷ = ẑ, B is along +ŷ. - Q8hardReport
The magnetic field of an electromagnetic wave in vacuum is B = 2 × 10⁻⁷ sin(0.5 × 10³ x + 1.5 × 10¹¹ t) T, with x in metres and t in seconds. What are the electric field amplitude and the wavelength?
- A60 V/m, 2.0 cm
- B600 V/m, 1.26 cm
- C6 × 10⁻¹⁵ V/m, 1.26 cm
- D60 V/m, 1.26 cm
Show answer & solution
Correct answer: (D) 60 V/m, 1.26 cm
E₀ = cB₀ = 3×10⁸ × 2×10⁻⁷ = 60 V/m, and λ = 2π/k = 2π/500 m ≈ 1.26 cm. Check: ω/k = 1.5×10¹¹/500 = 3×10⁸ m/s = c.
Ready to test yourself? Take the 22-question Electromagnetic Waves test →