JEE (Main + Adv) · Physics

Magnetic Effects of Current

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
15
medium
7
hard

Magnetic Effects of Current — quick revision notes

This chapter covers the Biot–Savart law (straight wire, loop, arc and axis fields), Ampère's law (long wire, solid cylinder, solenoid), the Lorentz force on moving charges (circles, helices, the velocity selector), forces on current-carrying conductors and between parallel currents, torque on a current loop and its magnetic moment, and the moving-coil galvanometer with its conversion to an ammeter or voltmeter. JEE Main typically asks 1–2 questions, often combined geometry fields, radius or pitch ratios, and galvanometer conversion.
  • Finite straight wire: B = μ₀I/(4πd)(sinθ₁ + sinθ₂). For an infinite wire B = μ₀I/(2πd); for a semi-infinite wire with P opposite its end, B = μ₀I/(4πd). A point on the wire's own line gets B = 0.
  • Loop centre B = μ₀I/(2R). An arc subtending angle φ gives B = μ₀Iφ/(4πR). On the axis B = μ₀IR²/[2(R² + x²)3/2]. A square of side a gives 2√2μ₀I/(πa) at its centre.
  • Ampère's law: inside a solid cylinder B = μ₀Ir/(2πR²), outside B = μ₀I/(2πr), inside a hollow pipe B = 0. Long solenoid: B = μ₀nI.
  • Lorentz force F = q(E + v × B). In a field: r = mv/(qB) = √(2mK)/(qB) = (1/B)√(2mV/q), and T = 2πm/(qB) does not depend on speed. Helix pitch = (v cosθ)T. Undeflected beam (crossed E and B): v = E/B.
  • Force on a wire: F = I L × B. A curved wire in a uniform field feels the same force as the straight chord joining its ends, and a closed loop feels zero net force. Parallel wires: F/l = μ₀I₁I₂/(2πd), attractive for like currents.
  • Current loop: m = NIA. Torque τ = m × B = NIAB sinθ, with θ measured between the normal and B. U = −m·B, and the work to turn the loop from stable to unstable is 2mB. Orbiting electron: m = evr/2.
  • Galvanometer: current sensitivity NAB/k and voltage sensitivity NAB/(kG). For an ammeter use a shunt S = I_gG/(I − I_g) in parallel. For a voltmeter use R = V/I_g − G in series.

Common mistakes to avoid

  • Taking the angle between the coil's plane and B as the torque angle. τ uses the angle between the normal (m) and B.
  • Using the arc length πR instead of the chord 2R for the force on a semicircular wire in a uniform field.
  • Mixing up the ratio rules: at equal K, r ∝ √m/q; at equal momentum, r ∝ 1/q; after the same accelerating V, r ∝ √(m/q).
  • Adding a nonzero field from straight leads whose line passes through the field point. Such segments contribute nothing.
Exam tip: For composite wire shapes, split the wire into straight pieces and arcs, use the standard results with careful right-hand-rule signs, and add the pieces as vectors. For particle motion, write r, T and the pitch first, then form ratios.

Magnetic Effects of Current — solved practice questions

8 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    A circular loop of radius 10 cm carries a current of 10 A. The magnetic field at its centre is (μ₀ = 4π × 10⁻⁷ T m/A):

    • A6.28 × 10⁻⁵ T
    • B2.0 × 10⁻⁵ T
    • C3.14 × 10⁻⁵ T
    • D1.26 × 10⁻⁴ T
    Show answer & solution

    Correct answer: (A) 6.28 × 10⁻⁵ T

    B = μ₀I/(2R) = 4π×10⁻⁷ × 10/0.2 = 2π × 10⁻⁵ ≈ 6.28 × 10⁻⁵ T.
  2. Q2easyReport

    A long straight wire carries a current of 5 A. The magnetic field at a distance of 10 cm from it is:

    • A3.14 × 10⁻⁵ T
    • B2 × 10⁻⁵ T
    • C1 × 10⁻⁶ T
    • D1 × 10⁻⁵ T
    Show answer & solution

    Correct answer: (D) 1 × 10⁻⁵ T

    B = μ₀I/(2πr) = 2×10⁻⁷ × 5/0.1 = 1 × 10⁻⁵ T.
  3. Q3mediumReport

    A circular current loop has radius R. On its axis, at a distance √3·R from the centre, the field is what fraction of the field at the centre?

    • A1/2
    • B1/4
    • C1/8
    • D1/(2√2)
    Show answer & solution

    Correct answer: (C) 1/8

    B_axis/B_centre = R³/(R² + x²)3/2. With x = √3R this is R³/(4R²)3/2 = R³/(8R³) = 1/8.
  4. Q4mediumReport

    A long wire carrying current I is bent into a semicircle of radius R. Its two straight parts run along the line of the semicircle's diameter, extending outward to infinity in opposite directions. The magnetic field at the centre of the semicircle is:

    • Aμ₀I/(2R)
    • Bμ₀I/(4R)
    • Cμ₀I/(4R) + μ₀I/(2πR)
    • Dzero
    Show answer & solution

    Correct answer: (B) μ₀I/(4R)

    The centre lies on the line of both straight parts, so each contributes zero (dl ∥ r). The semicircle gives half the field of a full loop: μ₀I/(4R).
  5. Q5hardReport

    A square loop of side a carries a current I. The magnetic field at its centre is:

    • A4μ₀I/(πa)
    • Bμ₀I/(√2 πa)
    • C√2 μ₀I/(πa)
    • D2√2 μ₀I/(πa)
    Show answer & solution

    Correct answer: (D) 2√2 μ₀I/(πa)

    Each side is at distance a/2 from the centre and subtends 45° on each side, so it gives [μ₀I/(4π·a/2)](sin45° + sin45°) = √2μ₀I/(2πa). Four sides give 2√2 μ₀I/(πa).
  6. Q6easyReport

    A solenoid 50 cm long has 500 turns and carries a current of 2 A. The magnetic field well inside it is about:

    • A2.5 mT
    • B0.25 mT
    • C1.26 mT
    • D5.0 mT
    Show answer & solution

    Correct answer: (A) 2.5 mT

    n = 500/0.5 = 1000 turns per metre. B = μ₀nI = 4π×10⁻⁷ × 1000 × 2 ≈ 2.51 × 10⁻³ T ≈ 2.5 mT.
  7. Q7mediumReport

    A long solid cylindrical conductor of radius R carries a current I spread uniformly over its cross-section. The ratio of the magnetic field at distance R/2 from the axis to the field at distance 2R is:

    • A1 : 4
    • B1 : 1
    • C2 : 1
    • D1 : 2
    Show answer & solution

    Correct answer: (B) 1 : 1

    Inside, B = μ₀Ir/(2πR²), so at r = R/2, B = μ₀I/(4πR). Outside, B = μ₀I/(2πr), so at r = 2R, B = μ₀I/(4πR). The ratio is 1 : 1.
  8. Q8easyReport

    A proton moves at 2 × 10⁶ m/s at an angle of 30° to a uniform magnetic field of 0.5 T. The magnetic force on it is:

    • A1.39 × 10⁻¹³ N
    • B4 × 10⁻¹⁴ N
    • C1.6 × 10⁻¹³ N
    • D8 × 10⁻¹⁴ N
    Show answer & solution

    Correct answer: (D) 8 × 10⁻¹⁴ N

    F = qvB sinθ = 1.6×10⁻¹⁹ × 2×10⁶ × 0.5 × 0.5 = 8 × 10⁻¹⁴ N.

Ready to test yourself? Take the 22-question Magnetic Effects of Current test →