JEE (Main + Adv) · Physics
Electromagnetic Induction
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electromagnetic Induction — quick revision notes
- ε = −N dΦ/dt with Φ = BA cos θ. Charge that flows: q = NΔΦ/R, independent of time. Flipping a coil through 180° gives ΔΦ = 2BA.
- Motional emf ε = Bvl (perpendicular components only). Rod on rails: I = Bvl/R, drag force F = B²l²v/R, terminal velocity v = FR/(B²l²).
- Rod rotating about one end: ε = ½Bωl². Rotating about its midpoint the end-to-end emf is 0. Disc of radius R: ε = ½BωR².
- Induced field in a cylindrical region of changing B: E = (r/2) dB/dt for r ≤ R and E = (R²/2r) dB/dt for r ≥ R.
- Self-inductance L = μ₀N²A/l = μ₀n²Al. Mutual inductance of coaxial solenoids M = μ₀n₁n₂πr₁²l, with M₁₂ = M₂₁. Coupling: M = k√(L₁L₂).
- Inductor energy U = ½LI², energy density B²/2μ₀. Series inductors: L₁ + L₂ ± 2M. Parallel (no coupling): 1/L = 1/L₁ + 1/L₂.
- LR growth: I = (E/R)(1 − e−t/τ). Decay: I = I₀e−t/τ, with τ = L/R. Half-current time is τ ln 2.
- AC generator: ε = NBAω sin ωt and ε₀ = NBAω. The emf is maximum when the coil plane is parallel to B (flux zero), and zero when the plane is perpendicular to B.
Common mistakes to avoid
- Taking ΔΦ = BA instead of 2BA when a coil is flipped, or forgetting the factor N.
- Rotating rods: treating ½Bωl² as if l were the total length when the pivot is not at an end. Each segment's emf is measured from the pivot, and the end-to-end emf is their difference.
- Getting Lenz's-law direction wrong: the induced current opposes the change in flux, not the flux itself.
- LR circuits: using 'energy reaches half' and 'current reaches half' interchangeably. Half energy means I = I₀/√2.
Electromagnetic Induction — solved practice questions
8 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
A coil of 200 turns has a flux per turn that falls from 5 mWb to 1 mWb in 0.1 s. What is the magnitude of the average induced emf?
- A0.04 V
- B4 V
- C8 V
- D0.8 V
Show answer & solution
Correct answer: (C) 8 V
|ε| = NΔΦ/Δt = 200 × (4 × 10⁻³)/0.1 = 8 V. - Q2mediumReport
The flux linked with a coil varies as Φ = (5t² + 3t + 2) mWb, with t in seconds. What is the magnitude of the induced emf at t = 2 s?
- A32 mV
- B28 mV
- C13 mV
- D23 mV
Show answer & solution
Correct answer: (D) 23 mV
|ε| = dΦ/dt = (10t + 3) mWb/s = 23 mV at t = 2 s. - Q3easyReport
Lenz's law is a consequence of the law of conservation of:
- Alinear momentum
- Benergy
- Ccharge
- Dmass
Show answer & solution
Correct answer: (B) energy
If the induced current helped the change, energy could be created from nothing. The opposing current means mechanical work must be done, which is energy conservation. - Q4mediumReport
A rod 0.5 m long slides at a constant 4 m/s on two parallel frictionless rails in a perpendicular field of 0.2 T. The circuit's total resistance is 2 Ω. What external force keeps the rod moving at constant speed?
- A0.08 N
- B0.02 N
- C0.04 N
- D0.2 N
Show answer & solution
Correct answer: (B) 0.02 N
ε = Blv = 0.2 × 0.5 × 4 = 0.4 V, so I = 0.2 A. The force needed is F = BIl = 0.2 × 0.2 × 0.5 = 0.02 N (equivalently B²l²v/R). - Q5mediumReport
A 1 m metal rod rotates at 400 rad/s about an axis through one end, perpendicular to the rod. A uniform field of 0.5 T is parallel to the axis. What emf develops between the ends?
- A400 V
- B100 V
- C50 V
- D200 V
Show answer & solution
Correct answer: (B) 100 V
ε = ½Bωl² = ½ × 0.5 × 400 × 1² = 100 V. - Q6hardReport
A metal rod of length L rotates with angular speed ω in a uniform field B parallel to the rotation axis. The axis is perpendicular to the rod and passes through a point L/3 from one end. What is the magnitude of the emf between the two ends?
- ABωL²/6
- BBωL²/2
- CBωL²/18
- D5BωL²/18
Show answer & solution
Correct answer: (A) BωL²/6
Each end is at the same-sign potential relative to the pivot. The ends differ by ½Bω[(2L/3)² − (L/3)²] = ½Bω(3L²/9) = BωL²/6. - Q7mediumReport
An air-cored solenoid has 500 turns, length 0.5 m and cross-sectional area 10 cm². What is its self-inductance (approximately)?
- A1.26 mH
- B6.28 mH
- C0.314 mH
- D0.628 mH
Show answer & solution
Correct answer: (D) 0.628 mH
L = μ₀N²A/l = 4π × 10⁻⁷ × 2.5 × 10⁵ × 10⁻³/0.5 = 6.28 × 10⁻⁴ H ≈ 0.628 mH. - Q8easyReport
The current in a 0.2 H inductor falls steadily from 5 A to 1 A in 0.1 s. What is the magnitude of the self-induced emf?
- A4 V
- B0.8 V
- C8 V
- D16 V
Show answer & solution
Correct answer: (C) 8 V
|ε| = L|ΔI/Δt| = 0.2 × 4/0.1 = 8 V.
Ready to test yourself? Take the 22-question Electromagnetic Induction test →