JEE (Main + Adv) · Physics

Electronic Devices

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
14
medium
7
hard

Electronic Devices — quick revision notes

This chapter covers energy bands, intrinsic and extrinsic semiconductors, the p-n junction (depletion layer, biasing), diode applications (rectifiers, Zener regulator), optoelectronic devices (LED, photodiode, solar cell) and logic gates. JEE Main usually asks 1–2 questions on it: carrier-concentration and conductivity numericals, Zener or diode circuit currents, band gap to wavelength conversions, and truth tables of gate combinations.
  • Mass action law: nₑ·nₕ = nᵢ². In n-type nₑ ≈ N_D and nₕ = nᵢ²/N_D; in p-type nₕ ≈ N_A
  • Conductivity: σ = e(nₑμₑ + nₕμₕ); current I = neAv_d for each carrier type
  • Band gap and wavelength: λ (nm) = 1240/E_g (eV). An LED emits λ ≈ hc/E_g; a photodetector needs λ ≤ hc/E_g
  • Unbiased junction: diffusion current (majority carriers) = drift current (minority carriers). Forward bias lowers the barrier (V₀ − V); reverse bias raises it (V₀ + V) and widens the depletion layer; field E ≈ V/d
  • Rectifiers: half-wave V_avg = V_m/π, V_rms = V_m/2, ripple frequency f. Full-wave V_avg = 2V_m/π, V_rms = V_m/√2, ripple frequency 2f
  • Zener regulator: I_R = (V_in − V_Z)/R, I_L = V_Z/R_L, I_Z = I_R − I_L, and I_Z(max) = P_max/V_Z
  • Gates: NAND and NOR are universal. NOR with inputs tied = NOT; NAND of inverted inputs = OR; De Morgan's theorems ¬(A·B) = Ā + B̄ and ¬(A+B) = Ā·B̄
  • Photodiode works in reverse bias, LED in forward bias, and a solar cell has no bias with its I–V curve in the fourth quadrant. Zener breakdown occurs in heavily doped junctions, avalanche breakdown in lightly doped ones

Common mistakes to avoid

  • Taking nₕ = N_D in n-type material; minority carriers must come from nᵢ²/N_D
  • Using V_m/π (half-wave) for a full-wave or bridge rectifier, or confusing average with RMS values
  • Forgetting to subtract the load current when finding the Zener current, or ignoring the 0.7 V drop when the question gives it
  • Drift current comes from minority carriers, not majority carriers; a reverse-biased ideal diode is an open circuit
Exam tip: For gate combinations, write the Boolean expression and reduce it with De Morgan's theorems, then check all four input rows. For diode circuits, first decide which diodes are on before applying Ohm's law.

Electronic Devices — solved practice questions

8 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    In a pure (intrinsic) silicon crystal at room temperature, how does the free-electron concentration nₑ compare with the hole concentration nₕ?

    • Anₑ = nₕ = nᵢ
    • Bnₑ > nₕ
    • Cnₑ = nₕ = 0
    • Dnₑ < nₕ
    Show answer & solution

    Correct answer: (A) nₑ = nₕ = nᵢ

    In an intrinsic semiconductor each thermally broken bond creates one free electron and one hole, so nₑ = nₕ = nᵢ. Both are non-zero at room temperature.
  2. Q2easyReport

    Silicon is doped with arsenic (a group-15 element). What type of semiconductor results, and what are its majority carriers?

    • An-type, holes
    • Bp-type, electrons
    • Cp-type, holes
    • Dn-type, electrons
    Show answer & solution

    Correct answer: (D) n-type, electrons

    Pentavalent arsenic donates its fifth valence electron, so the material is n-type and electrons are the majority carriers.
  3. Q3hardReport

    Pure Si has 5 × 10²⁸ atoms m⁻³. It is doped with 1 ppm of arsenic, and all donors are ionised. If nᵢ = 1.5 × 10¹⁶ m⁻³, what is the hole concentration?

    • A4.5 × 10⁹ m⁻³
    • B5 × 10²² m⁻³
    • C1.5 × 10¹⁶ m⁻³
    • D2.25 × 10³² m⁻³
    Show answer & solution

    Correct answer: (A) 4.5 × 10⁹ m⁻³

    N_D = 5 × 10²⁸ × 10⁻⁶ = 5 × 10²² m⁻³ ≈ nₑ. Then nₕ = nᵢ²/nₑ = 2.25 × 10³² / 5 × 10²² = 4.5 × 10⁹ m⁻³.
  4. Q4mediumReport

    For intrinsic germanium, nᵢ = 2.5 × 10¹⁹ m⁻³, μₑ = 0.39 m² V⁻¹ s⁻¹ and μₕ = 0.19 m² V⁻¹ s⁻¹. Taking e = 1.6 × 10⁻¹⁹ C, what is its electrical conductivity?

    • A2.32 S m⁻¹
    • B1.52 S m⁻¹
    • C0.78 S m⁻¹
    • D4.64 S m⁻¹
    Show answer & solution

    Correct answer: (A) 2.32 S m⁻¹

    σ = e nᵢ(μₑ + μₕ) = 1.6 × 10⁻¹⁹ × 2.5 × 10¹⁹ × 0.58 = 4 × 0.58 = 2.32 S m⁻¹.
  5. Q5easyReport

    An LED is made from a semiconductor with band gap 1.9 eV. What is the approximate wavelength of the light it emits? (hc = 1240 eV nm)

    • A450 nm
    • B653 nm
    • C590 nm
    • D720 nm
    Show answer & solution

    Correct answer: (B) 653 nm

    λ = hc/E_g = 1240/1.9 ≈ 653 nm, which is red light.
  6. Q6mediumReport

    A photodiode is made from a semiconductor with band gap 2.5 eV. Which of these wavelengths can it detect? (hc = 1240 eV nm)

    • A600 nm
    • B850 nm
    • C450 nm
    • D700 nm
    Show answer & solution

    Correct answer: (C) 450 nm

    Detection needs photon energy ≥ E_g, so λ ≤ 1240/2.5 = 496 nm. Of the options, only 450 nm meets this.
  7. Q7easyReport

    A silicon diode with a constant forward drop of 0.7 V is connected in forward bias in series with a 100 Ω resistor and a 5 V battery. What current flows?

    • A7 mA
    • B57 mA
    • C50 mA
    • D43 mA
    Show answer & solution

    Correct answer: (D) 43 mA

    I = (5 − 0.7)/100 = 4.3/100 A = 43 mA.
  8. Q8hardReport

    A Zener diode with V_Z = 6 V is used as a voltage regulator. The 10 V supply feeds it through a 200 Ω series resistor, and a 1 kΩ load is connected across the Zener. What current flows through the Zener diode?

    • A26 mA
    • B14 mA
    • C20 mA
    • D6 mA
    Show answer & solution

    Correct answer: (B) 14 mA

    Series current = (10 − 6)/200 = 20 mA. Load current = 6/1000 = 6 mA. So I_Z = 20 − 6 = 14 mA.

Ready to test yourself? Take the 22-question Electronic Devices test →