JEE (Main + Adv) · Physics

Properties of Solids and Liquids

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
16
medium
7
hard

Properties of Solids and Liquids — quick revision notes

This chapter covers elasticity (stress, strain, the moduli and Poisson's ratio), fluid statics and dynamics (Pascal, Archimedes, continuity, Bernoulli, Torricelli, viscosity and Stokes' law), surface tension and capillarity, and thermal properties (expansion, calorimetry, conduction, radiation, Newton's cooling). JEE Main usually sets 1–2 short numericals from it, most often on Young's modulus, Bernoulli or efflux, terminal velocity, bubble excess pressure, capillary rise, mixing with phase change, and series/parallel conduction. Newton's law of cooling, Poisson's ratio and elastic energy density are not explicitly listed in the current JEE Main syllabus, but they still appear occasionally, so revise them briefly.
  • Y = FL/(AΔL); stored energy per unit volume u = ½ stress × strain = stress²/(2Y); thermal stress in a clamped rod = YαΔT; ΔV/V = ε(1 − 2σ)
  • Bulk modulus B = −V dP/dV (isothermal gas: B = P; adiabatic: B = γP); P = P₀ + ρgh; fraction of a floating body submerged = ρ_body/ρ_liquid
  • Continuity A₁v₁ = A₂v₂; Bernoulli P + ½ρv² + ρgh = constant; efflux v = √(2gh); range from a hole at depth h in a column of height H is R = 2√(h(H − h)), largest (= H) at h = H/2
  • Stokes' force F = 6πηrv; terminal velocity v_t = 2r²(ρ − σ)g/(9η) ∝ r²; n identical drops merging give v' = n2/3 v
  • Excess pressure: drop 2T/r, soap bubble 4T/r; work to form a bubble = 8πr²T; capillary rise h = 2T cosθ/(rρg), and hr = constant
  • Expansion: β = 2α, γ = 3α; γ_real = γ_apparent + γ_vessel; a pendulum clock loses about ½αΔθ × 86400 s per day when the temperature rises by Δθ, and gains the same amount when it falls
  • Conduction: rate = KAΔT/L; in series K_eq = 2K₁K₂/(K₁ + K₂) for equal lengths; in parallel K_eq = (K₁ + K₂)/2 for equal areas
  • Stefan P = σεAT⁴ (T in kelvin); Wien λ_m T = b ≈ 2.9 × 10⁻³ m K; Newton's cooling (average form): (θ₁ − θ₂)/t = k[(θ₁ + θ₂)/2 − θ₀]

Common mistakes to avoid

  • Using 2T/r for a soap bubble: it has two surfaces, so ΔP = 4T/r and the surface energy is doubled
  • Using Celsius in Stefan's or Wien's law: always convert to kelvin before taking ratios such as T⁴
  • In ice–steam or ice–water mixing, assuming everything melts or condenses: first compare the heat available with the heat required
  • Writing the volume strain as ε(1 + 2σ), or forgetting that γ_glass = 3α when finding overflow or apparent expansion
Exam tip: For fluid-flow questions, write continuity first and then Bernoulli between the same two points. For calorimetry, always check the 0 °C or 100 °C 'limit' case before writing a heat balance.

Properties of Solids and Liquids — solved practice questions

8 JEE Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    A steel wire of length 2 m and cross-sectional area 1 mm² is stretched by a force of 100 N. If Young's modulus of steel is 2 × 10¹¹ Pa, the extension of the wire is:

    • A1 mm
    • B0.5 mm
    • C10 mm
    • D0.1 mm
    Show answer & solution

    Correct answer: (A) 1 mm

    ΔL = FL/(AY) = (100 × 2)/(10⁻⁶ × 2 × 10¹¹) = 200/(2 × 10⁵) = 10⁻³ m = 1 mm.
  2. Q2mediumReport

    Two wires A and B are made of the same material. Wire A has length L and diameter 2d; wire B has length 2L and diameter d. When the same load is hung from each, the ratio of extensions ΔL_A : ΔL_B is:

    • A1 : 8
    • B2 : 1
    • C1 : 2
    • D1 : 4
    Show answer & solution

    Correct answer: (A) 1 : 8

    ΔL = FL/(AY) ∝ L/d². ΔL_A ∝ L/(4d²) and ΔL_B ∝ 2L/d², so the ratio is (1/4)/2 = 1/8.
  3. Q3mediumReport

    A wire (Y = 2 × 10¹¹ Pa) is under a longitudinal stress of 10⁸ Pa. The elastic potential energy stored per unit volume is:

    • A5 × 10⁴ J/m³
    • B5 × 10⁻⁴ J/m³
    • C2.5 × 10⁴ J/m³
    • D2.5 × 10³ J/m³
    Show answer & solution

    Correct answer: (C) 2.5 × 10⁴ J/m³

    u = ½ × stress × strain = stress²/(2Y) = (10⁸)²/(4 × 10¹¹) = 10¹⁶/(4 × 10¹¹) = 2.5 × 10⁴ J/m³.
  4. Q4mediumReport

    The bulk modulus of water is 2.2 × 10⁹ Pa. The increase in pressure needed to reduce the volume of a given mass of water by 0.1% is:

    • A2.2 × 10⁹ Pa
    • B2.2 × 10⁶ Pa
    • C2.2 × 10¹² Pa
    • D2.2 × 10³ Pa
    Show answer & solution

    Correct answer: (B) 2.2 × 10⁶ Pa

    B = ΔP/(ΔV/V), so ΔP = B × (ΔV/V) = 2.2 × 10⁹ × 10⁻³ = 2.2 × 10⁶ Pa.
  5. Q5mediumReport

    A wire with Poisson's ratio 0.3 is stretched so that its longitudinal strain is 2 × 10⁻³. The fractional change in its volume is (assume small strains):

    • A2 × 10⁻³ (increase)
    • B3.2 × 10⁻³ (increase)
    • C8 × 10⁻⁴ (increase)
    • D8 × 10⁻⁴ (decrease)
    Show answer & solution

    Correct answer: (C) 8 × 10⁻⁴ (increase)

    ΔV/V = ΔL/L − 2(Δr/r) = ε(1 − 2σ) = 2 × 10⁻³ × (1 − 0.6) = 8 × 10⁻⁴. The value is positive, so the volume increases.
  6. Q6hardReport

    A steel rod of cross-sectional area 2 cm² is clamped rigidly between two walls at its ends and then heated through 50 °C. Take Y = 2 × 10¹¹ Pa and α = 1.2 × 10⁻⁵ /°C. The force the rod exerts on each wall is:

    • A2.4 × 10³ N
    • B2.4 × 10⁴ N
    • C1.2 × 10⁴ N
    • D4.8 × 10⁴ N
    Show answer & solution

    Correct answer: (B) 2.4 × 10⁴ N

    Thermal stress = YαΔT = 2 × 10¹¹ × 1.2 × 10⁻⁵ × 50 = 1.2 × 10⁸ Pa. Force = stress × A = 1.2 × 10⁸ × 2 × 10⁻⁴ = 2.4 × 10⁴ N.
  7. Q7easyReport

    The absolute pressure at a depth of 10 m below the surface of a lake is (take P₀ = 1.01 × 10⁵ Pa, ρ = 1000 kg/m³, g = 10 m/s²):

    • A1.01 × 10⁵ Pa
    • B3.02 × 10⁵ Pa
    • C1.0 × 10⁵ Pa
    • D2.01 × 10⁵ Pa
    Show answer & solution

    Correct answer: (D) 2.01 × 10⁵ Pa

    P = P₀ + ρgh = 1.01 × 10⁵ + 1000 × 10 × 10 = 1.01 × 10⁵ + 1.0 × 10⁵ = 2.01 × 10⁵ Pa.
  8. Q8easyReport

    In a hydraulic lift the small piston has area 5 cm² and the large piston has area 500 cm². What force on the small piston will just support a car of mass 1500 kg on the large piston? (g = 10 m/s²)

    • A150 N
    • B1500 N
    • C15 N
    • D300 N
    Show answer & solution

    Correct answer: (A) 150 N

    By Pascal's law F₁/A₁ = F₂/A₂, so F₁ = 15000 × (5/500) = 150 N.

Ready to test yourself? Take the 22-question Properties of Solids and Liquids test →