HS 2027 Semester IV (WBCHSE) · Model question paper
Physics — Set 1
উচ্চমাধ্যমিক ২০২৭ · চতুর্থ সেমিস্টার · পদার্থবিদ্যা · মডেল প্রশ্নপত্র ১
Full marks: 35 · Time: 2 hours + 10 minutes reading time (the 2026 timing; check the 2027 routine)
Built by PadhoDost on the official WBCHSE Semester IV pattern (sections, marks and the choice inside each unit). It is a practice paper, not an official Council paper. The model answers and marking points are in a closed box after each section, so write yours first.
Warm up: 5 quick Physics questions
Question 1 of 5 · Electromagnetic Waves (তড়িৎচুম্বকীয় তরঙ্গ) — Sem III · no sign-up, instant answers
Who introduced the concept of displacement current?
সরণ প্রবাহের ধারণা কে প্রবর্তন করেন?Section A: Short answer questions
10 marksসংক্ষিপ্ত উত্তরভিত্তিক প্রশ্ন
Answer 3 of the 6 Optics questions and 2 of the 4 on Dual Nature of Radiation and Matter · 2 marks each
- 1.1An object is placed 30 cm in front of a concave mirror of focal length 10 cm. Find the position of the image and the magnification.10 cm ফোকাস দৈর্ঘ্যের একটি অবতল দর্পণের (concave mirror) সামনে 30 cm দূরে একটি বস্তু রাখা আছে। প্রতিবিম্বের অবস্থান ও বিবর্ধন নির্ণয় করো।
- 1.2Why does a convex mirror always form a virtual, erect and diminished image of a real object? Give one use of a convex mirror based on this property.উত্তল দর্পণ (convex mirror) বাস্তব বস্তুর সর্বদা অসদ্, সমশীর্ষ ও খর্বিত প্রতিবিম্ব গঠন করে কেন? এই ধর্মের ভিত্তিতে উত্তল দর্পণের একটি ব্যবহার লেখো।
- 1.3The refractive index of a medium with respect to air is 2. Find the critical angle for this medium. State the two conditions for total internal reflection.বায়ুর সাপেক্ষে একটি মাধ্যমের প্রতিসরাঙ্ক 2। ওই মাধ্যমের সংকট কোণ (critical angle) নির্ণয় করো। পূর্ণ অভ্যন্তরীণ প্রতিফলনের (total internal reflection) দুটি শর্ত লেখো।
- 1.4State the principle on which an optical fibre works. Why is the core of an optical fibre made of a material of higher refractive index than the cladding?অপটিক্যাল ফাইবার (optical fibre) কোন নীতিতে কাজ করে? অপটিক্যাল ফাইবারের কোর (core)-এর প্রতিসরাঙ্ক ক্ল্যাডিং (cladding)-এর চেয়ে বেশি রাখা হয় কেন?
- 1.5Two thin lenses of focal lengths +20 cm and -40 cm are kept in contact. Find the focal length and power of the combination. Is the combination converging or diverging?+20 cm ও -40 cm ফোকাস দৈর্ঘ্যের দুটি পাতলা লেন্স পরস্পরের সংস্পর্শে রাখা আছে। সমবায়ের ফোকাস দৈর্ঘ্য ও ক্ষমতা (power) নির্ণয় করো। সমবায়টি অভিসারী না অপসারী?
- 1.6A convex lens of glass (refractive index 1.5) has a focal length of 20 cm in air. What will be its focal length when it is immersed in water of refractive index 4/3?কাচের (প্রতিসরাঙ্ক 1.5) একটি উত্তল লেন্সের বায়ুতে ফোকাস দৈর্ঘ্য 20 cm। 4/3 প্রতিসরাঙ্কের জলে ডোবালে এর ফোকাস দৈর্ঘ্য কত হবে?
- 1.7Find the energy of a photon of wavelength 620 nm in electronvolt. (Take hc = 1240 eV nm.)620 nm তরঙ্গদৈর্ঘ্যের একটি ফোটনের শক্তি ইলেকট্রনভোল্ট এককে নির্ণয় করো। (hc = 1240 eV nm ধরো।)
- 1.8Light of wavelength 400 nm falls on a metal surface of work function 2.3 eV. Find the maximum kinetic energy of the emitted photoelectrons and the stopping potential. (Take hc = 1240 eV nm.)2.3 eV কার্যাপেক্ষকের (work function) একটি ধাতব তলে 400 nm তরঙ্গদৈর্ঘ্যের আলো আপতিত হয়। নির্গত ফটোইলেকট্রনের সর্বোচ্চ গতিশক্তি ও নিবৃত্তি বিভব (stopping potential) নির্ণয় করো। (hc = 1240 eV nm ধরো।)
- 1.9The work function of a metal is 2.48 eV. Find its threshold wavelength. Will light of wavelength 600 nm eject photoelectrons from it? (Take hc = 1240 eV nm.)একটি ধাতুর কার্যাপেক্ষক 2.48 eV। এর সূচন তরঙ্গদৈর্ঘ্য (threshold wavelength) নির্ণয় করো। 600 nm তরঙ্গদৈর্ঘ্যের আলো কি এ থেকে ফটোইলেকট্রন নির্গত করবে? (hc = 1240 eV nm ধরো।)
- 1.10An electron is accelerated from rest through a potential difference of 100 V. Find its de Broglie wavelength.স্থির অবস্থা থেকে একটি ইলেকট্রনকে 100 V বিভবপার্থক্যের মধ্য দিয়ে ত্বরান্বিত করা হল। এর দ্য ব্রয় তরঙ্গদৈর্ঘ্য (de Broglie wavelength) নির্ণয় করো।
Answers — Section A
- 1.1Using the Cartesian sign convention, u = -30 cm and f = -10 cm. 1/v = 1/f - 1/u = -1/10 + 1/30 = -2/30, so v = -15 cm. The image is real and forms 15 cm in front of the mirror. m = -v/u = -(-15)/(-30) = -0.5. The image is inverted and half the size of the object.কার্তেসীয় চিহ্নরীতি অনুযায়ী u = -30 cm, f = -10 cm। 1/v = 1/f - 1/u = -1/10 + 1/30 = -2/30, অতএব v = -15 cm। প্রতিবিম্ব সদ্, দর্পণের সামনে 15 cm দূরে গঠিত হয়। m = -v/u = -(-15)/(-30) = -0.5। প্রতিবিম্ব অবশীর্ষ এবং বস্তুর অর্ধেক আকারের।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 1.2For a convex mirror f is positive and for a real object u is negative. From 1/v = 1/f - 1/u, both terms on the right are positive, so v is positive and smaller than f. The image is therefore always behind the mirror (virtual), and m = -v/u is positive and less than 1 (erect and diminished). Use: as a rear-view mirror in vehicles, because it gives a wide field of view.উত্তল দর্পণের ক্ষেত্রে f ধনাত্মক এবং বাস্তব বস্তুর ক্ষেত্রে u ঋণাত্মক। 1/v = 1/f - 1/u থেকে ডানদিকের দুটি পদই ধনাত্মক, তাই v ধনাত্মক এবং f-এর চেয়ে ছোটো। ফলে প্রতিবিম্ব সর্বদা দর্পণের পিছনে (অসদ্) গঠিত হয় এবং m = -v/u ধনাত্মক ও 1-এর চেয়ে কম (সমশীর্ষ ও খর্বিত)। ব্যবহার: গাড়ির পশ্চাৎদৃষ্টি দর্পণ (rear-view mirror) হিসেবে, কারণ এতে দৃষ্টিক্ষেত্র অনেক বড়ো হয়।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 1.3sin C = 1/n = 1/2, so C = 30°. Conditions for TIR: (i) light must travel from the optically denser medium to the rarer medium; (ii) the angle of incidence in the denser medium must be greater than the critical angle.sin C = 1/n = 1/2, অতএব C = 30°। পূর্ণ অভ্যন্তরীণ প্রতিফলনের শর্ত: (i) আলোকে ঘনতর মাধ্যম থেকে লঘুতর মাধ্যমে যেতে হবে; (ii) ঘনতর মাধ্যমে আপতন কোণ সংকট কোণের চেয়ে বড়ো হতে হবে।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 1.4An optical fibre works on the principle of total internal reflection: light entering one end strikes the core-cladding boundary at angles greater than the critical angle and is reflected again and again, so it travels along the fibre with very little loss. TIR can occur only when light goes from a denser to a rarer medium, so the core must be optically denser (higher refractive index) than the cladding.অপটিক্যাল ফাইবার পূর্ণ অভ্যন্তরীণ প্রতিফলন নীতিতে কাজ করে: এক প্রান্ত দিয়ে প্রবেশ করা আলো কোর-ক্ল্যাডিং বিভেদতলে সংকট কোণের চেয়ে বড়ো কোণে আপতিত হয় এবং বারবার প্রতিফলিত হয়ে খুব কম ক্ষয়ে ফাইবারের মধ্য দিয়ে এগিয়ে যায়। পূর্ণ অভ্যন্তরীণ প্রতিফলন কেবল ঘনতর থেকে লঘুতর মাধ্যমে যাওয়ার সময় ঘটে, তাই কোরকে ক্ল্যাডিং-এর চেয়ে আলোকীয়ভাবে ঘনতর (বেশি প্রতিসরাঙ্কবিশিষ্ট) হতে হয়।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 1.51/F = 1/f1 + 1/f2 = 1/20 - 1/40 = 1/40, so F = +40 cm = +0.4 m. P = 1/F = 1/0.4 = +2.5 D. Since F (and P) is positive, the combination is converging.1/F = 1/f1 + 1/f2 = 1/20 - 1/40 = 1/40, অতএব F = +40 cm = +0.4 m। P = 1/F = 1/0.4 = +2.5 D। F (এবং P) ধনাত্মক বলে সমবায়টি অভিসারী।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 1.6By the lens maker's formula, 1/f ∝ (relative refractive index - 1) for the same lens. In air: 1/fa = (1.5 - 1)K = 0.5K. In water: relative index = 1.5/(4/3) = 1.125, so 1/fw = (1.125 - 1)K = 0.125K. fw/fa = 0.5/0.125 = 4, so fw = 4 × 20 = 80 cm.লেন্স প্রস্তুতকারকের সূত্র (lens maker's formula) অনুযায়ী একই লেন্সের ক্ষেত্রে 1/f ∝ (আপেক্ষিক প্রতিসরাঙ্ক - 1)। বায়ুতে: 1/fa = (1.5 - 1)K = 0.5K। জলে: আপেক্ষিক প্রতিসরাঙ্ক = 1.5/(4/3) = 1.125, অতএব 1/fw = (1.125 - 1)K = 0.125K। fw/fa = 0.5/0.125 = 4, অতএব fw = 4 × 20 = 80 cm।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 1.7E = hc/λ = 1240 eV nm / 620 nm E = 2 eV.E = hc/λ = 1240 eV nm / 620 nm E = 2 eV।Revise: Dual Nature of Radiation and Matter (বিকিরণ ও পদার্থের দ্বৈত প্রকৃতি) — Sem IV →
- 1.8Photon energy E = hc/λ = 1240/400 = 3.1 eV. K_max = E - φ0 = 3.1 - 2.3 = 0.8 eV. Since eV0 = K_max, the stopping potential V0 = 0.8 V.ফোটনের শক্তি E = hc/λ = 1240/400 = 3.1 eV। K_max = E - φ0 = 3.1 - 2.3 = 0.8 eV। যেহেতু eV0 = K_max, নিবৃত্তি বিভব V0 = 0.8 V।Revise: Dual Nature of Radiation and Matter (বিকিরণ ও পদার্থের দ্বৈত প্রকৃতি) — Sem IV →
- 1.9λ0 = hc/φ0 = 1240/2.48 = 500 nm. No. 600 nm is longer than the threshold wavelength 500 nm, so each photon (energy 1240/600 ≈ 2.07 eV) has less energy than the work function and no photoelectrons are emitted.λ0 = hc/φ0 = 1240/2.48 = 500 nm। না। 600 nm সূচন তরঙ্গদৈর্ঘ্য 500 nm-এর চেয়ে বড়ো, তাই প্রতিটি ফোটনের শক্তি (1240/600 ≈ 2.07 eV) কার্যাপেক্ষকের চেয়ে কম এবং কোনো ফটোইলেকট্রন নির্গত হবে না।Revise: Dual Nature of Radiation and Matter (বিকিরণ ও পদার্থের দ্বৈত প্রকৃতি) — Sem IV →
- 1.10For an electron accelerated through V volts, λ = 1.227/√V nm (from λ = h/√(2meV)). λ = 1.227/√100 = 1.227/10 = 0.1227 nm ≈ 0.123 nm.V ভোল্ট বিভবপার্থক্যে ত্বরান্বিত ইলেকট্রনের ক্ষেত্রে λ = 1.227/√V nm (λ = h/√(2meV) থেকে)। λ = 1.227/√100 = 1.227/10 = 0.1227 nm ≈ 0.123 nm।Revise: Dual Nature of Radiation and Matter (বিকিরণ ও পদার্থের দ্বৈত প্রকৃতি) — Sem IV →
Section B: Short answer questions (Type 2)
15 marksসংক্ষিপ্ত উত্তরভিত্তিক প্রশ্ন (দ্বিতীয় প্রকার)
Answer 1 of 2 on Optics, 2 of 4 on Atoms and Nuclei, 1 of 2 on Electronic Devices and 1 of 2 on Communication System · 3 marks each
- 2.1(a) A biconvex lens has both radii of curvature equal to 20 cm and refractive index 1.5. Find its focal length and power. (2) (b) Where will the image be formed if an object is placed 30 cm from this lens? (1)(a) একটি উভোত্তল লেন্সের দুটি তলেরই বক্রতা ব্যাসার্ধ 20 cm এবং প্রতিসরাঙ্ক 1.5। এর ফোকাস দৈর্ঘ্য ও ক্ষমতা নির্ণয় করো। (2) (b) লেন্স থেকে 30 cm দূরে একটি বস্তু রাখলে প্রতিবিম্ব কোথায় গঠিত হবে? (1)
- 2.2(a) A person with hypermetropia has a near point of 75 cm. Find the focal length and power of the lens that will let him read a book held at 25 cm. (2) (b) Where is the image formed in the uncorrected hypermetropic eye? (1)(a) একজন দীর্ঘদৃষ্টিসম্পন্ন (hypermetropic) ব্যক্তির নিকটবিন্দু 75 cm। 25 cm দূরে রাখা বই পড়ার জন্য প্রয়োজনীয় লেন্সের ফোকাস দৈর্ঘ্য ও ক্ষমতা নির্ণয় করো। (2) (b) সংশোধনহীন দীর্ঘদৃষ্টিসম্পন্ন চোখে প্রতিবিম্ব কোথায় গঠিত হয়? (1)
- 2.3Write the main observations of Rutherford's alpha-particle scattering experiment and the conclusions drawn from them about the structure of the atom.রাদারফোর্ডের আলফা-কণা বিক্ষেপণ পরীক্ষার প্রধান পর্যবেক্ষণগুলি এবং তা থেকে পরমাণুর গঠন সম্পর্কে প্রাপ্ত সিদ্ধান্তগুলি লেখো।
- 2.4Using Bohr's model, find the energy of the photon emitted when the electron in a hydrogen atom jumps from the n = 4 level to the n = 2 level. Find its wavelength and state the series to which this line belongs. (E_n = -13.6/n² eV, hc = 1240 eV nm)বোরের মডেল ব্যবহার করে হাইড্রোজেন পরমাণুর ইলেকট্রন n = 4 স্তর থেকে n = 2 স্তরে নামলে নিঃসৃত ফোটনের শক্তি নির্ণয় করো। এর তরঙ্গদৈর্ঘ্য নির্ণয় করো এবং রেখাটি কোন শ্রেণির অন্তর্গত তা লেখো। (E_n = -13.6/n² eV, hc = 1240 eV nm)
- 2.5(a) State Bohr's quantisation condition for angular momentum. (1) (b) Using E_n = -13.6 Z²/n² eV, find the ionisation energy of a Li²⁺ ion (Z = 3) in its ground state, and the ratio of the radius of its n = 2 orbit to that of its n = 1 orbit. (2)(a) কৌণিক ভরবেগ সংক্রান্ত বোরের কোয়ান্টায়ন শর্ত লেখো। (1) (b) E_n = -13.6 Z²/n² eV ব্যবহার করে ভূমি অবস্থায় Li²⁺ আয়নের (Z = 3) আয়নন শক্তি নির্ণয় করো এবং এর n = 2 কক্ষের ব্যাসার্ধ ও n = 1 কক্ষের ব্যাসার্ধের অনুপাত লেখো। (2)
- 2.6Using 1/λ = R(1/n₁² - 1/n₂²) with R = 1.097 × 10⁷ m⁻¹, find (a) the shortest wavelength of the Lyman series and (b) the longest wavelength of the Balmer series of hydrogen. In which region of the spectrum does each lie?1/λ = R(1/n₁² - 1/n₂²) এবং R = 1.097 × 10⁷ m⁻¹ ব্যবহার করে হাইড্রোজেনের (a) লাইম্যান শ্রেণির ক্ষুদ্রতম তরঙ্গদৈর্ঘ্য এবং (b) বামার শ্রেণির দীর্ঘতম তরঙ্গদৈর্ঘ্য নির্ণয় করো। প্রতিটি বর্ণালির কোন অঞ্চলে অবস্থিত?
- 2.7Distinguish between n-type and p-type semiconductors (three points).n-টাইপ ও p-টাইপ অর্ধপরিবাহীর মধ্যে তিনটি পার্থক্য লেখো।
- 2.8(a) An LED is made of a semiconductor of band gap 1.9 eV. Find the wavelength of the light it emits and name its colour. (Take hc = 1240 eV nm.) (2) (b) Why is a photodiode operated in reverse bias? (1)(a) 1.9 eV শক্তি-ব্যবধানের (band gap) একটি অর্ধপরিবাহী দিয়ে একটি LED তৈরি। এটি থেকে নিঃসৃত আলোর তরঙ্গদৈর্ঘ্য নির্ণয় করো এবং বর্ণের নাম লেখো। (hc = 1240 eV nm ধরো।) (2) (b) ফটোডায়োডকে বিপরীত বায়াসে (reverse bias) চালানো হয় কেন? (1)
- 2.9(a) Why is modulation needed to transmit a low-frequency audio signal? (1) (b) Find the minimum length of antenna (λ/4) needed to transmit a 20 kHz signal directly, and comment on your result. (2)(a) নিম্ন কম্পাঙ্কের শব্দ সংকেত প্রেরণের জন্য মডুলেশন (modulation) প্রয়োজন কেন? (1) (b) 20 kHz সংকেত সরাসরি প্রেরণের জন্য প্রয়োজনীয় অ্যান্টেনার ন্যূনতম দৈর্ঘ্য (λ/4) নির্ণয় করো এবং ফলাফল সম্পর্কে মন্তব্য করো। (2)
- 2.10In an amplitude modulated wave, the maximum amplitude is 10 V and the minimum amplitude is 2 V. Find the modulation index, and the amplitudes of the carrier wave and the message signal. Why should the modulation index not exceed 1?একটি বিস্তার মডুলেটেড (amplitude modulated) তরঙ্গের সর্বোচ্চ বিস্তার 10 V এবং সর্বনিম্ন বিস্তার 2 V। মডুলেশন সূচক (modulation index), বাহক তরঙ্গ ও বার্তা সংকেতের বিস্তার নির্ণয় করো। মডুলেশন সূচক 1-এর বেশি হওয়া উচিত নয় কেন?
Answers — Section B
- 2.1(a) R1 = +20 cm, R2 = -20 cm. 1/f = (n - 1)(1/R1 - 1/R2) = 0.5 × (1/20 + 1/20) = 0.5 × 1/10 = 1/20, so f = +20 cm = 0.2 m. P = 1/f = 1/0.2 = +5 D. (b) u = -30 cm. 1/v = 1/f + 1/u = 1/20 - 1/30 = 1/60, so v = +60 cm. A real, inverted image forms 60 cm on the other side of the lens (m = v/u = -2).(a) R1 = +20 cm, R2 = -20 cm। 1/f = (n - 1)(1/R1 - 1/R2) = 0.5 × (1/20 + 1/20) = 0.5 × 1/10 = 1/20, অতএব f = +20 cm = 0.2 m। P = 1/f = 1/0.2 = +5 D। (b) u = -30 cm। 1/v = 1/f + 1/u = 1/20 - 1/30 = 1/60, অতএব v = +60 cm। লেন্সের অপর পাশে 60 cm দূরে সদ্ ও অবশীর্ষ প্রতিবিম্ব গঠিত হবে (m = v/u = -2)।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 2.2(a) The lens must form a virtual image at the near point (75 cm) of a book at 25 cm: u = -25 cm, v = -75 cm. 1/f = 1/v - 1/u = -1/75 + 1/25 = 2/75, so f = +37.5 cm = 0.375 m (convex lens). P = 1/0.375 ≈ +2.67 D. (b) For a near object, the image in an uncorrected hypermetropic eye would form behind the retina.(a) লেন্সকে 25 cm দূরের বইয়ের অসদ্ প্রতিবিম্ব নিকটবিন্দুতে (75 cm) গঠন করতে হবে: u = -25 cm, v = -75 cm। 1/f = 1/v - 1/u = -1/75 + 1/25 = 2/75, অতএব f = +37.5 cm = 0.375 m (উত্তল লেন্স)। P = 1/0.375 ≈ +2.67 D। (b) সংশোধনহীন দীর্ঘদৃষ্টিসম্পন্ন চোখে কাছের বস্তুর প্রতিবিম্ব রেটিনার পিছনে গঠিত হয়।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 2.3Observations (thin gold foil bombarded with alpha particles): 1. Most alpha particles passed straight through the foil without deflection. 2. A few were deflected through large angles, and a very few (about 1 in 8000) bounced back by more than 90°. Conclusions: 1. Most of the atom is empty space. 2. All the positive charge and almost all the mass of the atom are concentrated in a tiny, dense central region, the nucleus (radius about 10⁻¹⁵ to 10⁻¹⁴ m, compared with about 10⁻¹⁰ m for the atom); the strong Coulomb repulsion of this nucleus causes the large-angle scattering. Electrons move around the nucleus.পর্যবেক্ষণ (পাতলা সোনার পাতে আলফা কণা আপতিত করে): 1. বেশিরভাগ আলফা কণা কোনো বিচ্যুতি ছাড়াই সোজা পাতের মধ্য দিয়ে চলে যায়। 2. কিছু কণা বড়ো কোণে বিচ্যুত হয় এবং খুব অল্প কয়েকটি (প্রায় 8000-এ 1টি) 90°-এর বেশি কোণে ফিরে আসে। সিদ্ধান্ত: 1. পরমাণুর বেশিরভাগ অংশই ফাঁকা। 2. পরমাণুর সমস্ত ধনাত্মক আধান ও প্রায় সমস্ত ভর একটি অতি ক্ষুদ্র, ঘন কেন্দ্রীয় অঞ্চলে, অর্থাৎ নিউক্লিয়াসে, কেন্দ্রীভূত (ব্যাসার্ধ প্রায় 10⁻¹⁵ থেকে 10⁻¹⁴ m, যেখানে পরমাণুর ব্যাসার্ধ প্রায় 10⁻¹⁰ m); এই নিউক্লিয়াসের তীব্র কুলম্ব বিকর্ষণই বড়ো কোণে বিক্ষেপণের কারণ। ইলেকট্রনগুলি নিউক্লিয়াসের চারপাশে ঘোরে।Revise: Atoms and Nuclei (পরমাণু ও নিউক্লিয়াস) — Sem IV →
- 2.4E4 = -13.6/16 = -0.85 eV, E2 = -13.6/4 = -3.40 eV. Photon energy = E4 - E2 = -0.85 - (-3.40) = 2.55 eV. λ = hc/E = 1240/2.55 ≈ 486 nm (blue-green light). Since the lower level is n = 2, it belongs to the Balmer series (visible region).E4 = -13.6/16 = -0.85 eV, E2 = -13.6/4 = -3.40 eV। ফোটনের শক্তি = E4 - E2 = -0.85 - (-3.40) = 2.55 eV। λ = hc/E = 1240/2.55 ≈ 486 nm (নীলাভ-সবুজ আলো)। নিম্নতর স্তর n = 2 বলে রেখাটি বামার শ্রেণির (Balmer series, দৃশ্যমান অঞ্চল) অন্তর্গত।Revise: Atoms and Nuclei (পরমাণু ও নিউক্লিয়াস) — Sem IV →
- 2.5(a) An electron can revolve only in those orbits for which its angular momentum is an integral multiple of h/2π: mvr = nh/2π, n = 1, 2, 3, ... (b) Ground-state energy E1 = -13.6 × 3²/1² = -122.4 eV, so the ionisation energy = 122.4 eV. r_n ∝ n²/Z, so r2/r1 = 2²/1² = 4.(a) ইলেকট্রন কেবল সেইসব কক্ষে ঘুরতে পারে যেখানে তার কৌণিক ভরবেগ h/2π-এর পূর্ণসংখ্যার গুণিতক: mvr = nh/2π, n = 1, 2, 3, ... (b) ভূমি অবস্থার শক্তি E1 = -13.6 × 3²/1² = -122.4 eV, তাই আয়নন শক্তি = 122.4 eV। r_n ∝ n²/Z, অতএব r2/r1 = 2²/1² = 4।Revise: Atoms and Nuclei (পরমাণু ও নিউক্লিয়াস) — Sem IV →
- 2.6(a) Lyman series: n₁ = 1; shortest λ when n₂ = ∞. 1/λ = R, so λ = 1/(1.097 × 10⁷) = 9.12 × 10⁻⁸ m ≈ 91.2 nm (ultraviolet). (b) Balmer series: n₁ = 2; longest λ when n₂ = 3. 1/λ = R(1/4 - 1/9) = 5R/36, so λ = 36/(5 × 1.097 × 10⁷) = 6.56 × 10⁻⁷ m ≈ 656 nm (visible, red).(a) লাইম্যান শ্রেণি: n₁ = 1; n₂ = ∞ হলে λ ক্ষুদ্রতম। 1/λ = R, অতএব λ = 1/(1.097 × 10⁷) = 9.12 × 10⁻⁸ m ≈ 91.2 nm (অতিবেগুনি)। (b) বামার শ্রেণি: n₁ = 2; n₂ = 3 হলে λ দীর্ঘতম। 1/λ = R(1/4 - 1/9) = 5R/36, অতএব λ = 36/(5 × 1.097 × 10⁷) = 6.56 × 10⁻⁷ m ≈ 656 nm (দৃশ্যমান, লাল)।Revise: Atoms and Nuclei (পরমাণু ও নিউক্লিয়াস) — Sem IV →
- 2.71. Impurity: n-type is made by adding a pentavalent impurity (P, As); p-type by adding a trivalent impurity (B, Al, In). 2. Majority carriers: in n-type, electrons are the majority carriers and holes the minority carriers; in p-type, holes are the majority carriers and electrons the minority carriers. 3. Impurity type and energy level: the pentavalent atom is a donor and creates a donor level just below the conduction band; the trivalent atom is an acceptor and creates an acceptor level just above the valence band.1. অপদ্রব্য: পঞ্চযোজী অপদ্রব্য (P, As) মিশিয়ে n-টাইপ তৈরি হয়; ত্রিযোজী অপদ্রব্য (B, Al, In) মিশিয়ে p-টাইপ তৈরি হয়। 2. সংখ্যাগুরু বাহক: n-টাইপে ইলেকট্রন সংখ্যাগুরু এবং হোল সংখ্যালঘু বাহক; p-টাইপে হোল সংখ্যাগুরু এবং ইলেকট্রন সংখ্যালঘু বাহক। 3. অপদ্রব্যের ধরন ও শক্তিস্তর: পঞ্চযোজী পরমাণু দাতা (donor), এটি পরিবহণ পটির ঠিক নীচে দাতা স্তর সৃষ্টি করে; ত্রিযোজী পরমাণু গ্রহীতা (acceptor), এটি যোজ্যতা পটির ঠিক উপরে গ্রহীতা স্তর সৃষ্টি করে।Revise: Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV →
- 2.8(a) Photon energy ≈ Eg, so λ = hc/Eg = 1240/1.9 ≈ 653 nm. This lies in the red region, so the LED gives red light. (b) In reverse bias the current is only the small minority-carrier current. Light creates extra electron-hole pairs, which changes this small current by a large fraction, so the change in current with light intensity is easy to measure.(a) ফোটনের শক্তি ≈ Eg, তাই λ = hc/Eg = 1240/1.9 ≈ 653 nm। এটি লাল অঞ্চলে, তাই LED-টি লাল আলো দেয়। (b) বিপরীত বায়াসে প্রবাহ কেবল সংখ্যালঘু বাহকজনিত ক্ষুদ্র প্রবাহ। আলো অতিরিক্ত ইলেকট্রন-হোল জোড় তৈরি করে, যা এই ক্ষুদ্র প্রবাহকে আনুপাতিকভাবে অনেকটা বদলে দেয়, তাই আলোর তীব্রতার সঙ্গে প্রবাহের পরিবর্তন সহজে মাপা যায়।Revise: Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV →
- 2.9(a) An antenna must be at least about λ/4 long to radiate a signal well. Low-frequency signals have very long wavelengths, so the antenna would be impossibly long; also the power radiated at low frequency is very small and signals from different stations would mix. So the signal is carried on a high-frequency carrier. (b) λ = c/f = (3 × 10⁸)/(20 × 10³) = 1.5 × 10⁴ m = 15 km. Antenna length = λ/4 = 15/4 = 3.75 km. Such an antenna is not practical, which shows why modulation is needed.(a) ভালোভাবে সংকেত বিকিরণের জন্য অ্যান্টেনার দৈর্ঘ্য অন্তত প্রায় λ/4 হতে হয়। নিম্ন কম্পাঙ্কের সংকেতের তরঙ্গদৈর্ঘ্য অনেক বড়ো, তাই অ্যান্টেনা অসম্ভব রকম লম্বা হবে; তাছাড়া নিম্ন কম্পাঙ্কে বিকিরিত ক্ষমতা খুব কম এবং বিভিন্ন কেন্দ্রের সংকেত মিশে যাবে। তাই সংকেতকে উচ্চ কম্পাঙ্কের বাহক তরঙ্গের (carrier) সাহায্যে পাঠানো হয়। (b) λ = c/f = (3 × 10⁸)/(20 × 10³) = 1.5 × 10⁴ m = 15 km। অ্যান্টেনার দৈর্ঘ্য = λ/4 = 15/4 = 3.75 km। এমন অ্যান্টেনা বাস্তবে সম্ভব নয়, যা মডুলেশনের প্রয়োজনীয়তা দেখায়।Revise: Communication System (যোগাযোগ ব্যবস্থা) — Sem IV →
- 2.10A_max = A_c + A_m = 10 V and A_min = A_c - A_m = 2 V, so A_c = 6 V and A_m = 4 V. μ = (A_max - A_min)/(A_max + A_min) = (10 - 2)/(10 + 2) = 8/12 ≈ 0.67 (also A_m/A_c = 4/6). If μ > 1 (over-modulation), the envelope no longer follows the message; the wave is distorted and the message cannot be recovered correctly.A_max = A_c + A_m = 10 V এবং A_min = A_c - A_m = 2 V, অতএব A_c = 6 V এবং A_m = 4 V। μ = (A_max - A_min)/(A_max + A_min) = (10 - 2)/(10 + 2) = 8/12 ≈ 0.67 (একইভাবে A_m/A_c = 4/6)। μ > 1 হলে (অতি-মডুলেশন) আবরণী (envelope) আর বার্তাকে অনুসরণ করে না; তরঙ্গ বিকৃত হয় এবং বার্তা সঠিকভাবে পুনরুদ্ধার করা যায় না।Revise: Communication System (যোগাযোগ ব্যবস্থা) — Sem IV →
Section C: Descriptive questions
10 marksবর্ণনামূলক প্রশ্ন
Answer 1 of 2 on Optics and 1 of 2 on Electronic Devices · 5 marks each
- 3.1(a) Derive the relation between the object distance u, image distance v and focal length f for a concave mirror forming a real image. Show that f = R/2. (3) (b) An object is placed 15 cm in front of a concave mirror of focal length 10 cm. Find the position, nature and magnification of the image. (2)(a) সদ্ প্রতিবিম্ব গঠনকারী অবতল দর্পণের ক্ষেত্রে বস্তু-দূরত্ব u, প্রতিবিম্ব-দূরত্ব v ও ফোকাস দৈর্ঘ্য f-এর মধ্যে সম্পর্ক প্রতিষ্ঠা করো। দেখাও যে f = R/2। (3) (b) 10 cm ফোকাস দৈর্ঘ্যের অবতল দর্পণের সামনে 15 cm দূরে একটি বস্তু রাখা আছে। প্রতিবিম্বের অবস্থান, প্রকৃতি ও বিবর্ধন নির্ণয় করো। (2)
- 3.2(a) Derive the lens maker's formula for a thin convex lens. (3) (b) A plano-convex lens of refractive index 1.5 has a focal length of 40 cm. Find the radius of curvature of its curved surface. (2)(a) পাতলা উত্তল লেন্সের জন্য লেন্স প্রস্তুতকারকের সূত্র প্রতিষ্ঠা করো। (3) (b) 1.5 প্রতিসরাঙ্কের একটি সমতলোত্তল (plano-convex) লেন্সের ফোকাস দৈর্ঘ্য 40 cm। এর বক্রতলের বক্রতা ব্যাসার্ধ নির্ণয় করো। (2)
- 3.3Explain how a depletion layer and a potential barrier are formed in a p-n junction. Describe the behaviour of the junction under forward bias and reverse bias, and describe its I-V characteristic.p-n সংযোগে নিঃশেষিত স্তর (depletion layer) ও বিভব প্রাচীর (potential barrier) কীভাবে গঠিত হয় ব্যাখ্যা করো। সম্মুখ বায়াস (forward bias) ও বিপরীত বায়াসে সংযোগের আচরণ বর্ণনা করো এবং এর I-V বৈশিষ্ট্যলেখ বর্ণনা করো।
- 3.4(a) With a circuit description, explain how two p-n junction diodes can be used as a full-wave rectifier. Describe the input and output waveforms. (3) (b) How does a Zener diode work as a voltage regulator? (2)(a) বর্তনীর বর্ণনাসহ ব্যাখ্যা করো, কীভাবে দুটি p-n সংযোগ ডায়োড পূর্ণ-তরঙ্গ একমুখীকারক (full-wave rectifier) হিসেবে ব্যবহার করা যায়। ইনপুট ও আউটপুট তরঙ্গরূপ বর্ণনা করো। (3) (b) জেনার ডায়োড কীভাবে বিভব নিয়ন্ত্রক (voltage regulator) হিসেবে কাজ করে? (2)
Answers — Section C
- 3.1(a) Diagram: object AB beyond C on the principal axis, a ray from B parallel to the axis reflected through F, and a ray from B through C reflected back, meeting at B' to form the real image A'B'; P is the pole. f = R/2: a ray parallel to the axis strikes the mirror at M and reflects through F. The normal at M is CM, so angle of incidence = angle of reflection = θ, and ∠MCP = θ. Triangle CMF is isosceles, so FC = FM. For small aperture FM ≈ FP, so FP = FC = R/2, i.e. f = R/2. Mirror formula: triangles A'B'P and ABP are similar (law of reflection), so A'B'/AB = PA'/PA. Triangles A'B'C and ABC are similar, so A'B'/AB = CA'/CA. Hence PA'/PA = CA'/CA = (PC - PA')/(PA - PC). Using signs PA = -u, PA' = -v, PC = -R: v/u = (v - R)/(R - u). Cross-multiplying: vR - uv = uv - uR, so uR + vR = 2uv. Dividing by uvR: 1/v + 1/u = 2/R = 1/f. (b) u = -15 cm, f = -10 cm. 1/v = 1/f - 1/u = -1/10 + 1/15 = -1/30, so v = -30 cm. The image is real and inverted, 30 cm in front of the mirror. m = -v/u = -(-30)/(-15) = -2 (magnified twice).(a) চিত্র: প্রধান অক্ষের উপর C-এর বাইরে বস্তু AB; B থেকে অক্ষের সমান্তরাল রশ্মি প্রতিফলিত হয়ে F দিয়ে যায় এবং B থেকে C দিয়ে যাওয়া রশ্মি একই পথে ফিরে আসে; দুটি B'-তে মিলে সদ্ প্রতিবিম্ব A'B' গঠন করে; P মেরু। f = R/2: অক্ষের সমান্তরাল একটি রশ্মি দর্পণের M বিন্দুতে আপতিত হয়ে F দিয়ে যায়। M-এ অভিলম্ব CM, তাই আপতন কোণ = প্রতিফলন কোণ = θ এবং ∠MCP = θ। ত্রিভুজ CMF সমদ্বিবাহু, তাই FC = FM। ক্ষুদ্র উন্মেষের জন্য FM ≈ FP, অতএব FP = FC = R/2, অর্থাৎ f = R/2। দর্পণ সূত্র: প্রতিফলনের সূত্র অনুযায়ী ত্রিভুজ A'B'P ও ABP সদৃশ, তাই A'B'/AB = PA'/PA। ত্রিভুজ A'B'C ও ABC সদৃশ, তাই A'B'/AB = CA'/CA। অতএব PA'/PA = CA'/CA = (PC - PA')/(PA - PC)। চিহ্নরীতি (PA = -u, PA' = -v, PC = -R) প্রয়োগ করলে v/u = (v - R)/(R - u)। আড়াআড়ি গুণ করে vR - uv = uv - uR, অর্থাৎ uR + vR = 2uv। উভয় পক্ষকে uvR দিয়ে ভাগ করে: 1/v + 1/u = 2/R = 1/f। (b) u = -15 cm, f = -10 cm। 1/v = 1/f - 1/u = -1/10 + 1/15 = -1/30, অতএব v = -30 cm। প্রতিবিম্ব সদ্ ও অবশীর্ষ, দর্পণের সামনে 30 cm দূরে। m = -v/u = -(-30)/(-15) = -2 (দ্বিগুণ বিবর্ধিত)।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 3.2(a) Consider a thin lens of refractive index n2 in a medium of index n1, with radii of curvature R1 and R2. A point object O on the axis is at distance u. Refraction at the first surface (spherical refracting surface formula) gives an image I1 at v1: n2/v1 - n1/u = (n2 - n1)/R1 ... (1) I1 acts as the object for the second surface (lens is thin, so distances are measured from the same point). The final image I is at v: n1/v - n2/v1 = (n1 - n2)/R2 ... (2) Adding (1) and (2): n1(1/v - 1/u) = (n2 - n1)(1/R1 - 1/R2). For an object at infinity, v = f: 1/f = (n2/n1 - 1)(1/R1 - 1/R2). In air (n1 = 1, n2 = n): 1/f = (n - 1)(1/R1 - 1/R2), the lens maker's formula. It also gives 1/v - 1/u = 1/f. (b) For a plano-convex lens, R1 = R and R2 = ∞. 1/f = (n - 1)(1/R) → 1/40 = 0.5/R → R = 0.5 × 40 = 20 cm.(a) n1 প্রতিসরাঙ্কের মাধ্যমে রাখা n2 প্রতিসরাঙ্কের একটি পাতলা লেন্স ধরো, যার বক্রতা ব্যাসার্ধ R1 ও R2। অক্ষের উপর u দূরত্বে একটি বিন্দু বস্তু O আছে। প্রথম তলে প্রতিসরণে (গোলীয় প্রতিসারক তলের সূত্র) v1 দূরত্বে প্রতিবিম্ব I1 গঠিত হয়: n2/v1 - n1/u = (n2 - n1)/R1 ... (1) I1 দ্বিতীয় তলের বস্তু হিসেবে কাজ করে (লেন্স পাতলা, তাই দূরত্বগুলি একই বিন্দু থেকে মাপা হয়)। চূড়ান্ত প্রতিবিম্ব I, v দূরত্বে: n1/v - n2/v1 = (n1 - n2)/R2 ... (2) (1) ও (2) যোগ করে: n1(1/v - 1/u) = (n2 - n1)(1/R1 - 1/R2)। অসীম দূরত্বের বস্তুর জন্য v = f: 1/f = (n2/n1 - 1)(1/R1 - 1/R2)। বায়ুতে (n1 = 1, n2 = n): 1/f = (n - 1)(1/R1 - 1/R2), এটিই লেন্স প্রস্তুতকারকের সূত্র। এ থেকে 1/v - 1/u = 1/f-ও পাওয়া যায়। (b) সমতলোত্তল লেন্সে R1 = R এবং R2 = ∞। 1/f = (n - 1)(1/R) → 1/40 = 0.5/R → R = 0.5 × 40 = 20 cm।Revise: Optics (আলোকবিজ্ঞান) — Sem IV →
- 3.3Formation: when p and n regions are joined, electrons diffuse from the n-side to the p-side and holes from the p-side to the n-side, and they recombine near the junction. This leaves uncovered positive donor ions on the n-side and negative acceptor ions on the p-side. This thin region, empty of mobile charge carriers, is the depletion layer. The ions set up an electric field from n to p, which opposes further diffusion; the potential difference across the layer is the potential barrier (about 0.7 V for Si, 0.3 V for Ge). Forward bias (p to positive, n to negative terminal): the applied voltage opposes the barrier, the depletion layer becomes thinner, majority carriers cross easily and a large current (mA) flows. Reverse bias (p to negative, n to positive): the applied voltage adds to the barrier, the depletion layer widens, and only a very small current (μA) due to minority carriers flows; it stays almost constant until breakdown. I-V characteristic (diagram: forward current on the upper right, reverse current on the lower left): in forward bias the current is almost zero up to the knee (threshold) voltage and then rises sharply (non-linearly); in reverse bias a tiny, almost constant current flows until, at the breakdown voltage, the current increases suddenly.গঠন: p ও n অঞ্চল যুক্ত করলে ইলেকট্রন n-দিক থেকে p-দিকে এবং হোল p-দিক থেকে n-দিকে ব্যাপিত হয় এবং সংযোগের কাছে পুনর্মিলিত হয়। ফলে n-দিকে অনাবৃত ধনাত্মক দাতা আয়ন এবং p-দিকে ঋণাত্মক গ্রহীতা আয়ন থেকে যায়। চলমান আধানবাহকশূন্য এই সরু অঞ্চলই নিঃশেষিত স্তর। আয়নগুলি n থেকে p-এর দিকে একটি তড়িৎক্ষেত্র তৈরি করে, যা আরও ব্যাপনে বাধা দেয়; স্তরের দুই প্রান্তের বিভবপার্থক্যই বিভব প্রাচীর (Si-এর ক্ষেত্রে প্রায় 0.7 V, Ge-এর ক্ষেত্রে 0.3 V)। সম্মুখ বায়াস (p ধনাত্মক প্রান্তে, n ঋণাত্মক প্রান্তে): প্রযুক্ত বিভব প্রাচীরের বিপরীতে কাজ করে, নিঃশেষিত স্তর সরু হয়, সংখ্যাগুরু বাহক সহজে অতিক্রম করে এবং বড়ো প্রবাহ (mA) চলে। বিপরীত বায়াস (p ঋণাত্মক, n ধনাত্মক প্রান্তে): প্রযুক্ত বিভব প্রাচীরের সঙ্গে যুক্ত হয়, নিঃশেষিত স্তর চওড়া হয় এবং কেবল সংখ্যালঘু বাহকজনিত অতি ক্ষুদ্র প্রবাহ (μA) চলে; ভাঙন (breakdown) পর্যন্ত এটি প্রায় স্থির থাকে। I-V বৈশিষ্ট্যলেখ (চিত্র: উপরে ডানদিকে সম্মুখ প্রবাহ, নীচে বাঁদিকে বিপরীত প্রবাহ): সম্মুখ বায়াসে নী (knee) বা সূচন বিভব পর্যন্ত প্রবাহ প্রায় শূন্য, তারপর দ্রুত (অরৈখিকভাবে) বাড়ে; বিপরীত বায়াসে অতি ক্ষুদ্র প্রায় স্থির প্রবাহ চলে এবং ভাঙন বিভবে প্রবাহ হঠাৎ বেড়ে যায়।Revise: Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV →
- 3.4(a) Circuit: the AC input is applied to the primary of a centre-tap transformer. The two ends A and B of the secondary are joined to the p-sides of diodes D1 and D2; their n-sides are joined together and connected through the load resistance R_L to the centre tap. Working: in one half-cycle A is positive with respect to the centre tap, so D1 is forward biased and conducts while D2 is reverse biased; current flows through R_L in one direction. In the next half-cycle B is positive, so D2 conducts and D1 does not; the current through R_L is again in the same direction. Waveforms: the input is a sine wave; the output across R_L is a series of positive half-waves with no gaps (pulsating DC), one pulse for every half-cycle, so the output frequency is twice the input frequency. (b) The Zener diode is connected in reverse bias in parallel with the load, with a series resistance R_s in the supply line. In breakdown, the voltage across the Zener stays almost constant (V_Z) over a wide range of current. If the input voltage or the load current changes, the Zener current changes and the extra voltage drops across R_s, so the load voltage stays fixed at V_Z.(a) বর্তনী: AC ইনপুট একটি মধ্য-সংযোগযুক্ত (centre-tap) ট্রান্সফর্মারের মুখ্য কুণ্ডলীতে দেওয়া হয়। গৌণ কুণ্ডলীর দুই প্রান্ত A ও B ডায়োড D1 ও D2-এর p-দিকের সঙ্গে যুক্ত; তাদের n-দিক একসঙ্গে যুক্ত করে লোড রোধ R_L-এর মধ্য দিয়ে মধ্য-সংযোগে যুক্ত। কার্যপ্রণালী: একটি অর্ধচক্রে A মধ্য-সংযোগের সাপেক্ষে ধনাত্মক, তাই D1 সম্মুখ বায়াসে পরিবহণ করে এবং D2 বিপরীত বায়াসে থাকে; R_L-এর মধ্য দিয়ে একদিকে প্রবাহ চলে। পরের অর্ধচক্রে B ধনাত্মক, তাই D2 পরিবহণ করে, D1 করে না; R_L-এর মধ্য দিয়ে প্রবাহ আবার একই দিকে চলে। তরঙ্গরূপ: ইনপুট একটি সাইন তরঙ্গ; R_L-এর দুই প্রান্তে আউটপুট হল ফাঁকহীন ধনাত্মক অর্ধতরঙ্গের সারি (স্পন্দিত DC), প্রতি অর্ধচক্রে একটি স্পন্দন, তাই আউটপুটের কম্পাঙ্ক ইনপুটের দ্বিগুণ। (b) জেনার ডায়োডকে বিপরীত বায়াসে লোডের সঙ্গে সমান্তরালে যুক্ত করা হয় এবং সরবরাহ লাইনে একটি শ্রেণি রোধ R_s রাখা হয়। ভাঙন অবস্থায় প্রবাহের বিস্তৃত পরিসরে জেনারের দুই প্রান্তের বিভব প্রায় স্থির (V_Z) থাকে। ইনপুট বিভব বা লোড প্রবাহ বদলালে জেনার প্রবাহ বদলায় এবং অতিরিক্ত বিভব R_s-এ পতিত হয়, ফলে লোডের বিভব V_Z-তে স্থির থাকে।Revise: Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV →
Next step: practise the chapters this paper tests
এই প্রশ্নপত্রের অধ্যায়গুলো অনুশীলন করো
Each link opens that chapter's MCQ practice test, in English and Bengali with solutions.