HS 2027 Semester IV (WBCHSE) · Model question paper
Chemistry — Set 1
উচ্চমাধ্যমিক ২০২৭ · চতুর্থ সেমিস্টার · রসায়ন · মডেল প্রশ্নপত্র ১
Full marks: 35 · Time: 2 hours + 10 minutes reading time (the 2026 timing; check the 2027 routine)
Built by PadhoDost on the official WBCHSE Semester IV pattern (sections, marks and the choice inside each unit). It is a practice paper, not an official Council paper. The model answers and marking points are in a closed box after each section, so write yours first.
Warm up: 5 quick Chemistry questions
Question 1 of 5 · Chemical Kinetics (রাসায়নিক গতিবিদ্যা) — Sem IV · no sign-up, instant answers
Which of the following is NOT changed by a catalyst?
নীচের কোনটি অনুঘটক দ্বারা পরিবর্তিত হয় না?Section A: Short answer questions
10 marksসংক্ষিপ্ত উত্তরভিত্তিক প্রশ্ন
Answer 1 of 2 each on Electrochemistry, Chemical Kinetics and Coordination Compounds, and 2 of 4 on Organic Compounds containing Nitrogen · 2 marks each
- 1.1The resistance of a 0.1 M KCl solution in a conductivity cell of cell constant 1.29 cm⁻¹ is 100 Ω. Calculate its conductivity and molar conductivity.1.29 cm⁻¹ কোষ ধ্রুবকবিশিষ্ট (cell constant) একটি পরিবাহিতা কোষে 0.1 M KCl দ্রবণের রোধ 100 Ω। দ্রবণটির পরিবাহিতাঙ্ক (conductivity) ও মোলার পরিবাহিতা (molar conductivity) নির্ণয় করো।
- 1.2On dilution, the conductivity of an electrolyte solution decreases but its molar conductivity increases. Explain.লঘুকরণে (dilution) তড়িৎবিশ্লেষ্য দ্রবণের পরিবাহিতাঙ্ক হ্রাস পায় কিন্তু মোলার পরিবাহিতা বৃদ্ধি পায় — ব্যাখ্যা করো।
- 1.3Write two differences between order and molecularity of a reaction.বিক্রিয়ার ক্রম (order) ও আণবিকতার (molecularity) মধ্যে দুটি পার্থক্য লেখো।
- 1.4Derive the units of the rate constant for (a) a first-order reaction (1) (b) a second-order reaction (1). Take concentration in mol L⁻¹ and time in s.(a) প্রথম ক্রম বিক্রিয়ার (1) ও (b) দ্বিতীয় ক্রম বিক্রিয়ার (1) হার ধ্রুবকের (rate constant) একক নির্ণয় করো। গাঢ়ত্ব mol L⁻¹ এবং সময় s এককে ধরো।
- 1.5What is an ambidentate ligand? Give two examples and show their two modes of binding.উভদন্তী লিগ্যান্ড (ambidentate ligand) কাকে বলে? দুটি উদাহরণ দাও এবং তাদের দুই রকম বন্ধন-পদ্ধতি দেখাও।
- 1.6Write the IUPAC names of (a) [Co(NH₃)₅Cl]Cl₂ (1) (b) K₃[Fe(C₂O₄)₃] (1).IUPAC নাম লেখো: (a) [Co(NH₃)₅Cl]Cl₂ (1) (b) K₃[Fe(C₂O₄)₃] (1)।
- 1.7Aniline is a weaker base than ammonia. Explain.অ্যানিলিন অ্যামোনিয়ার চেয়ে মৃদু ক্ষারক — ব্যাখ্যা করো।
- 1.8Why can aniline not be prepared by Gabriel phthalimide synthesis?গ্যাব্রিয়েল থ্যালিমাইড সংশ্লেষণে অ্যানিলিন প্রস্তুত করা যায় না কেন?
- 1.9How will you convert acetamide into methylamine? Write the equation and name the reaction.অ্যাসিটামাইডকে কীভাবে মিথাইলঅ্যামিনে রূপান্তরিত করবে? সমীকরণ লেখো ও বিক্রিয়াটির নাম লেখো।
- 1.10What is the carbylamine test? Write the equation for the reaction with aniline.কার্বিলঅ্যামিন পরীক্ষা (carbylamine test) কী? অ্যানিলিনের ক্ষেত্রে বিক্রিয়ার সমীকরণ লেখো।
Answers — Section A
- 1.1Conductivity κ = cell constant / R = 1.29 cm⁻¹ / 100 Ω = 0.0129 S cm⁻¹. Molar conductivity Λm = κ × 1000 / M = 0.0129 × 1000 / 0.1 = 129 S cm² mol⁻¹.পরিবাহিতাঙ্ক κ = কোষ ধ্রুবক / R = 1.29 cm⁻¹ / 100 Ω = 0.0129 S cm⁻¹। মোলার পরিবাহিতা Λm = κ × 1000 / M = 0.0129 × 1000 / 0.1 = 129 S cm² mol⁻¹।Revise: Electrochemistry (তড়িৎ-রসায়ন) — Sem IV →
- 1.2Conductivity is the conductance of 1 cm³ of solution. On dilution the number of ions present per unit volume decreases, so conductivity decreases. Molar conductivity is the conductance of the whole volume containing 1 mol of electrolyte (Λm = κ × V). On dilution, V increases much more than κ falls; also interionic attraction decreases (and a weak electrolyte dissociates more), so Λm increases.পরিবাহিতাঙ্ক হলো 1 cm³ দ্রবণের পরিবাহিতা। লঘুকরণে একক আয়তনে উপস্থিত আয়নের সংখ্যা কমে যায়, তাই পরিবাহিতাঙ্ক হ্রাস পায়। মোলার পরিবাহিতা হলো 1 mol তড়িৎবিশ্লেষ্য ধারণকারী সমগ্র আয়তনের পরিবাহিতা (Λm = κ × V)। লঘুকরণে κ যতটা কমে, V তার চেয়ে অনেক বেশি বাড়ে; তা ছাড়া আন্তঃআয়নীয় আকর্ষণ কমে (এবং মৃদু তড়িৎবিশ্লেষ্যের বিয়োজন বাড়ে), তাই Λm বৃদ্ধি পায়।Revise: Electrochemistry (তড়িৎ-রসায়ন) — Sem IV →
- 1.31. Order is the sum of the powers of the concentration terms in the experimentally determined rate law; molecularity is the number of reacting species that collide simultaneously in an elementary step and is a theoretical concept. 2. Order can be zero, fractional or an integer; molecularity is always a whole number (1, 2 or 3) and can never be zero or fractional.1. ক্রম হলো পরীক্ষালব্ধ হার সমীকরণে গাঢ়ত্ব পদগুলির ঘাতের সমষ্টি; আণবিকতা হলো কোনো প্রাথমিক (elementary) ধাপে একসঙ্গে সংঘর্ষে অংশ নেওয়া বিক্রিয়ক কণার সংখ্যা এবং এটি একটি তাত্ত্বিক ধারণা। 2. ক্রম শূন্য, ভগ্নাংশ বা পূর্ণসংখ্যা হতে পারে; আণবিকতা সর্বদা পূর্ণসংখ্যা (1, 2 বা 3), কখনো শূন্য বা ভগ্নাংশ হয় না।Revise: Chemical Kinetics (রাসায়নিক গতিবিদ্যা) — Sem IV →
- 1.4(a) First order: rate = k[A], so k = rate/[A] = (mol L⁻¹ s⁻¹)/(mol L⁻¹) = s⁻¹. (b) Second order: rate = k[A]², so k = rate/[A]² = (mol L⁻¹ s⁻¹)/(mol L⁻¹)² = L mol⁻¹ s⁻¹.(a) প্রথম ক্রম: হার = k[A], তাই k = হার/[A] = (mol L⁻¹ s⁻¹)/(mol L⁻¹) = s⁻¹। (b) দ্বিতীয় ক্রম: হার = k[A]², তাই k = হার/[A]² = (mol L⁻¹ s⁻¹)/(mol L⁻¹)² = L mol⁻¹ s⁻¹।Revise: Chemical Kinetics (রাসায়নিক গতিবিদ্যা) — Sem IV →
- 1.5An ambidentate ligand is a unidentate ligand that has two different donor atoms and can bind to the central metal through either one of them (but only one at a time). Examples: NO₂⁻ binds through N (nitrito-N, M←NO₂) or through O (nitrito-O, M←ONO); SCN⁻ binds through S (thiocyanato, M←SCN) or through N (isothiocyanato, M←NCS).যে একদন্তী লিগ্যান্ডে দুটি ভিন্ন দাতা পরমাণু থাকে এবং যেকোনো একটির মাধ্যমে (একসময়ে একটিই) কেন্দ্রীয় ধাতুর সঙ্গে যুক্ত হতে পারে, তাকে উভদন্তী লিগ্যান্ড বলে। উদাহরণ: NO₂⁻, N-এর মাধ্যমে (নাইট্রিটো-N, M←NO₂) অথবা O-এর মাধ্যমে (নাইট্রিটো-O, M←ONO) যুক্ত হয়; SCN⁻, S-এর মাধ্যমে (থায়োসায়ানেটো, M←SCN) অথবা N-এর মাধ্যমে (আইসোথায়োসায়ানেটো, M←NCS) যুক্ত হয়।Revise: Coordination Compounds (সন্নিবেশ যৌগ) — Sem IV →
- 1.6(a) Pentaamminechloridocobalt(III) chloride. (Cl⁻ outside = 2, so Co is +3.) (b) Potassium trioxalatoferrate(III). (Anionic complex, so the metal name ends in -ate; 3K⁺ balance [Fe(C₂O₄)₃]³⁻, so Fe is +3.)(a) পেন্টাঅ্যামিনক্লোরিডোকোবাল্ট(III) ক্লোরাইড। (বাইরে 2টি Cl⁻, তাই Co-এর জারণ অবস্থা +3।) (b) পটাশিয়াম ট্রাইঅক্সালেটোফেরেট(III)। (অ্যানায়নীয় জটিল, তাই ধাতুর নামের শেষে -ate; 3টি K⁺, [Fe(C₂O₄)₃]³⁻-কে প্রশমিত করে, তাই Fe-এর জারণ অবস্থা +3।)Revise: Coordination Compounds (সন্নিবেশ যৌগ) — Sem IV →
- 1.7In aniline the lone pair on the nitrogen atom is delocalised into the benzene ring by resonance, so it is less available for donation to a proton. The anilinium ion formed on protonation has no such resonance, so aniline is less inclined to accept H⁺. Also the sp² ring carbon attached to N is electron-withdrawing. In NH₃ the lone pair is localised, so NH₃ is the stronger base.অ্যানিলিনে নাইট্রোজেন পরমাণুর নিঃসঙ্গ ইলেকট্রন-জোড় রেজোন্যান্সের মাধ্যমে বেঞ্জিন বলয়ে বিস্থানীকৃত (delocalised) থাকে, ফলে প্রোটনকে দান করার জন্য এটি কম লভ্য। প্রোটন গ্রহণে উৎপন্ন অ্যানিলিনিয়াম আয়নে এই রেজোন্যান্স থাকে না, তাই অ্যানিলিন H⁺ গ্রহণে কম আগ্রহী। তা ছাড়া N-এর সঙ্গে যুক্ত বলয়ের sp² কার্বন ইলেকট্রন-আকর্ষী। NH₃-এ নিঃসঙ্গ জোড়টি স্থানীকৃত, তাই NH₃ তীব্রতর ক্ষারক।Revise: Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
- 1.8Gabriel synthesis needs a nucleophilic substitution in which the phthalimide anion attacks the carbon of an alkyl halide and displaces the halide ion. Aryl halides such as chlorobenzene do not undergo this substitution, because the C–X bond has partial double-bond character due to resonance and the carbon is sp² hybridised. So N-phenylphthalimide cannot be formed, and aniline (a primary aromatic amine) cannot be obtained by this method.গ্যাব্রিয়েল সংশ্লেষণে থ্যালিমাইড অ্যানায়ন অ্যালকাইল হ্যালাইডের কার্বনকে আক্রমণ করে হ্যালাইড আয়নকে প্রতিস্থাপিত করে (কেন্দ্রাকর্ষী প্রতিস্থাপন)। ক্লোরোবেঞ্জিনের মতো অ্যারাইল হ্যালাইড এই প্রতিস্থাপনে অংশ নেয় না, কারণ রেজোন্যান্সের জন্য C–X বন্ধনে আংশিক দ্বিবন্ধন ধর্ম থাকে এবং কার্বনটি sp² সংকরিত। তাই N-ফিনাইলথ্যালিমাইড তৈরি হয় না এবং এই পদ্ধতিতে অ্যানিলিন (প্রাইমারি অ্যারোমেটিক অ্যামিন) পাওয়া যায় না।Revise: Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
- 1.9Acetamide is warmed with bromine and aqueous NaOH (Hoffmann bromamide degradation): CH₃CONH₂ + Br₂ + 4NaOH → CH₃NH₂ + Na₂CO₃ + 2NaBr + 2H₂O The amine formed has one carbon atom fewer than the amide.অ্যাসিটামাইডকে ব্রোমিন ও জলীয় NaOH-সহ উত্তপ্ত করা হয় (হফম্যান ব্রোমামাইড অবক্ষয় বিক্রিয়া): CH₃CONH₂ + Br₂ + 4NaOH → CH₃NH₂ + Na₂CO₃ + 2NaBr + 2H₂O উৎপন্ন অ্যামিনে অ্যামাইডের চেয়ে একটি কার্বন পরমাণু কম থাকে।Revise: Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
- 1.10When a primary amine (aliphatic or aromatic) is warmed with chloroform and alcoholic KOH, a foul-smelling isocyanide (carbylamine) is formed. Secondary and tertiary amines do not give this test, so it identifies primary amines. C₆H₅NH₂ + CHCl₃ + 3KOH (alc.) → C₆H₅NC + 3KCl + 3H₂O (phenyl isocyanide)প্রাইমারি অ্যামিনকে (অ্যালিফ্যাটিক বা অ্যারোমেটিক) ক্লোরোফর্ম ও অ্যালকোহলীয় KOH-সহ উত্তপ্ত করলে দুর্গন্ধযুক্ত আইসোসায়ানাইড (কার্বিলঅ্যামিন) উৎপন্ন হয়। সেকেন্ডারি ও টার্শিয়ারি অ্যামিন এই পরীক্ষা দেয় না, তাই এর দ্বারা প্রাইমারি অ্যামিন শনাক্ত করা যায়। C₆H₅NH₂ + CHCl₃ + 3KOH (অ্যালকোহলীয়) → C₆H₅NC + 3KCl + 3H₂O (ফিনাইল আইসোসায়ানাইড)Revise: Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
Section B: Short answer questions (Type 2)
15 marksসংক্ষিপ্ত উত্তরভিত্তিক প্রশ্ন (দ্বিতীয় প্রকার)
Answer 1 of 2 on Electrochemistry, 2 of 4 on d- and f-Block Elements, 1 of 2 on Coordination Compounds and 1 of 2 on Organic Compounds containing Nitrogen · 3 marks each
- 2.1A current of 2 A is passed for 965 s through a solution of CuSO₄. Calculate the mass of copper deposited at the cathode. (Cu = 63.5 g mol⁻¹, 1 F = 96500 C mol⁻¹)CuSO₄ দ্রবণের মধ্য দিয়ে 965 s ধরে 2 A তড়িৎপ্রবাহ পাঠানো হলো। ক্যাথোডে কত ভর কপার জমা হবে নির্ণয় করো। (Cu = 63.5 g mol⁻¹, 1 F = 96500 C mol⁻¹)
- 2.2Calculate the emf of the cell Zn | Zn²⁺ (0.001 M) || Cu²⁺ (0.1 M) | Cu at 298 K. (E°cell = 1.10 V)298 K উষ্ণতায় Zn | Zn²⁺ (0.001 M) || Cu²⁺ (0.1 M) | Cu কোষটির তড়িচ্চালক বল নির্ণয় করো। (E°cell = 1.10 V)
- 2.3Calculate the spin-only magnetic moments of Mn²⁺, Cr³⁺ and Cu²⁺ ions. (Atomic numbers: Cr = 24, Mn = 25, Cu = 29)Mn²⁺, Cr³⁺ ও Cu²⁺ আয়নগুলির কেবল-ঘূর্ণন (spin-only) চৌম্বক ভ্রামক নির্ণয় করো। (পারমাণবিক সংখ্যা: Cr = 24, Mn = 25, Cu = 29)
- 2.4What is lanthanoid contraction? What is its cause? Write one important consequence of it.ল্যান্থানয়েড সংকোচন (lanthanoid contraction) কী? এর কারণ কী? এর একটি গুরুত্বপূর্ণ ফলাফল লেখো।
- 2.5How is potassium dichromate prepared from chromite ore? Write the balanced equations of the steps.ক্রোমাইট আকরিক থেকে কীভাবে পটাশিয়াম ডাইক্রোমেট প্রস্তুত করা হয়? ধাপগুলির সমতাযুক্ত সমীকরণ লেখো।
- 2.6(a) How is potassium permanganate prepared from pyrolusite (MnO₂)? Write the equations. (2) (b) Why is KMnO₄ deep purple even though manganese in it has no d electrons? (1)(a) পাইরোলুসাইট (MnO₂) থেকে কীভাবে পটাশিয়াম পারম্যাঙ্গানেট প্রস্তুত করা হয়? সমীকরণ লেখো। (2) (b) KMnO₄-এ ম্যাঙ্গানিজের কোনো d ইলেকট্রন না থাকা সত্ত্বেও এটি গাঢ় বেগুনি কেন? (1)
- 2.7State the main postulates of Werner's theory of coordination compounds. Explain, on this basis, the number of moles of AgCl precipitated per mole of [Co(NH₃)₅Cl]Cl₂ with excess AgNO₃ solution.সন্নিবেশ যৌগ সংক্রান্ত ওয়ের্নারের তত্ত্বের (Werner's theory) মূল স্বীকার্যগুলি লেখো। এর ভিত্তিতে ব্যাখ্যা করো, অতিরিক্ত AgNO₃ দ্রবণের সঙ্গে প্রতি মোল [Co(NH₃)₅Cl]Cl₂ থেকে কত মোল AgCl অধঃক্ষিপ্ত হয়।
- 2.8Using valence bond theory, compare [Ni(CN)₄]²⁻ and [NiCl₄]²⁻ with respect to hybridisation, geometry and magnetic behaviour. (Ni = 28)যোজ্যতা বন্ধন তত্ত্ব (VBT) প্রয়োগ করে [Ni(CN)₄]²⁻ ও [NiCl₄]²⁻-এর সংকরায়ণ, জ্যামিতিক গঠন ও চৌম্বক আচরণের তুলনা করো। (Ni = 28)
- 2.9How does Hinsberg's reagent help to distinguish primary, secondary and tertiary amines? Write the equations.হিন্সবার্গ বিকারক কীভাবে প্রাইমারি, সেকেন্ডারি ও টার্শিয়ারি অ্যামিন পৃথক করতে সাহায্য করে? সমীকরণ লেখো।
- 2.10Starting from benzenediazonium chloride, how will you prepare (a) chlorobenzene (1) (b) benzonitrile (1) (c) iodobenzene (1)? Write the equations.বেঞ্জিনডায়াজোনিয়াম ক্লোরাইড থেকে কীভাবে প্রস্তুত করবে (a) ক্লোরোবেঞ্জিন (1) (b) বেঞ্জোনাইট্রাইল (1) (c) আয়োডোবেঞ্জিন (1)? সমীকরণ লেখো।
Answers — Section B
- 2.1Charge passed Q = I × t = 2 A × 965 s = 1930 C. Cathode reaction: Cu²⁺ + 2e⁻ → Cu, so 2 F (2 × 96500 C) deposit 1 mol (63.5 g) Cu. Mass of Cu = 63.5 × 1930 / (2 × 96500) = 63.5 × 0.01 = 0.635 g.প্রবাহিত আধান Q = I × t = 2 A × 965 s = 1930 C। ক্যাথোড বিক্রিয়া: Cu²⁺ + 2e⁻ → Cu, অর্থাৎ 2 F (2 × 96500 C) আধানে 1 mol (63.5 g) Cu জমা হয়। Cu-এর ভর = 63.5 × 1930 / (2 × 96500) = 63.5 × 0.01 = 0.635 g।Revise: Electrochemistry (তড়িৎ-রসায়ন) — Sem IV →
- 2.2Cell reaction: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s); n = 2. Nernst equation at 298 K: Ecell = E°cell − (0.059/n) log ([Zn²⁺]/[Cu²⁺]). Ecell = 1.10 − (0.059/2) log (0.001/0.1) = 1.10 − 0.0295 × (−2) = 1.10 + 0.059 = 1.159 V.কোষ বিক্রিয়া: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s); n = 2। 298 K-এ নার্নস্ট সমীকরণ: Ecell = E°cell − (0.059/n) log ([Zn²⁺]/[Cu²⁺])। Ecell = 1.10 − (0.059/2) log (0.001/0.1) = 1.10 − 0.0295 × (−2) = 1.10 + 0.059 = 1.159 V।Revise: Electrochemistry (তড়িৎ-রসায়ন) — Sem IV →
- 2.3μ = √[n(n + 2)] BM, where n = number of unpaired electrons. Mn²⁺: [Ar]3d⁵, n = 5, μ = √35 = 5.92 BM. Cr³⁺: [Ar]3d³, n = 3, μ = √15 = 3.87 BM. Cu²⁺: [Ar]3d⁹, n = 1, μ = √3 = 1.73 BM.μ = √[n(n + 2)] BM, যেখানে n = অযুগ্ম ইলেকট্রনের সংখ্যা। Mn²⁺: [Ar]3d⁵, n = 5, μ = √35 = 5.92 BM। Cr³⁺: [Ar]3d³, n = 3, μ = √15 = 3.87 BM। Cu²⁺: [Ar]3d⁹, n = 1, μ = √3 = 1.73 BM।Revise: d- and f-Block Elements (d- ও f-ব্লক মৌল) — Sem IV →
- 2.4Lanthanoid contraction: the steady decrease in atomic and ionic (M³⁺) radii from lanthanum to lutetium as the atomic number increases. Cause: as we move along the series, the nuclear charge increases by one unit at each step and one electron is added to the 4f subshell. The 4f orbitals are diffuse, so one 4f electron shields another very imperfectly. Hence the effective nuclear charge felt by the outer electrons increases and the size decreases steadily. Consequence: elements of the second and third transition series in the same group have almost identical radii, e.g. Zr (160 pm) and Hf (159 pm), so their properties are very similar and they are difficult to separate.ল্যান্থানয়েড সংকোচন: পারমাণবিক সংখ্যা বৃদ্ধির সঙ্গে ল্যান্থানাম থেকে লুটেশিয়াম পর্যন্ত পারমাণবিক ও আয়নীয় (M³⁺) ব্যাসার্ধের ক্রমিক হ্রাস। কারণ: শ্রেণি বরাবর প্রতি ধাপে নিউক্লীয় আধান এক একক বাড়ে এবং একটি ইলেকট্রন 4f উপকক্ষে যুক্ত হয়। 4f কক্ষকগুলি বিস্তৃত (diffuse) হওয়ায় একটি 4f ইলেকট্রন অন্য 4f ইলেকট্রনকে খুবই অসম্পূর্ণভাবে আবৃত (shield) করে। ফলে বাইরের ইলেকট্রনগুলির উপর কার্যকরী নিউক্লীয় আধান বাড়ে এবং আকার ক্রমশ কমে। ফলাফল: একই শ্রেণির (group) দ্বিতীয় ও তৃতীয় সন্ধিগত সারির (series) মৌলগুলির ব্যাসার্ধ প্রায় সমান হয়, যেমন Zr (160 pm) ও Hf (159 pm); তাই এদের ধর্ম খুবই একরকম এবং এদের পৃথক করা কঠিন।Revise: d- and f-Block Elements (d- ও f-ব্লক মৌল) — Sem IV →
- 2.5Step 1: chromite ore (FeCr₂O₄) is fused with sodium carbonate in free access of air, giving sodium chromate: 4FeCr₂O₄ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂ Step 2: the yellow sodium chromate solution is filtered and acidified with sulphuric acid, giving orange sodium dichromate: 2Na₂CrO₄ + 2H⁺ → Na₂Cr₂O₇ + 2Na⁺ + H₂O Step 3: sodium dichromate solution is treated with potassium chloride; the less soluble potassium dichromate crystallises out: Na₂Cr₂O₇ + 2KCl → K₂Cr₂O₇ + 2NaClধাপ 1: ক্রোমাইট আকরিককে (FeCr₂O₄) বায়ুর অবাধ সংস্পর্শে সোডিয়াম কার্বনেটের সঙ্গে গলানো হয়, ফলে সোডিয়াম ক্রোমেট উৎপন্ন হয়: 4FeCr₂O₄ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂ ধাপ 2: হলুদ সোডিয়াম ক্রোমেট দ্রবণকে পরিস্রুত করে সালফিউরিক অ্যাসিড দিয়ে আম্লিক করা হয়, ফলে কমলা রঙের সোডিয়াম ডাইক্রোমেট পাওয়া যায়: 2Na₂CrO₄ + 2H⁺ → Na₂Cr₂O₇ + 2Na⁺ + H₂O ধাপ 3: সোডিয়াম ডাইক্রোমেট দ্রবণে পটাশিয়াম ক্লোরাইড যোগ করা হয়; কম দ্রাব্য পটাশিয়াম ডাইক্রোমেট কেলাসিত হয়: Na₂Cr₂O₇ + 2KCl → K₂Cr₂O₇ + 2NaClRevise: d- and f-Block Elements (d- ও f-ব্লক মৌল) — Sem IV →
- 2.6(a) MnO₂ is fused with KOH in the presence of air (or an oxidising agent such as KNO₃), giving green potassium manganate: 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O The manganate is then disproportionated in neutral or acidic solution (or oxidised electrolytically) to permanganate: 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O (b) Mn is in the +7 state (d⁰), so no d–d transition is possible. The colour is due to charge transfer: an electron moves from oxygen (ligand) to the empty d orbitals of Mn on absorbing visible light.(a) বায়ুর (অথবা KNO₃-এর মতো জারকের) উপস্থিতিতে MnO₂-কে KOH-এর সঙ্গে গলানো হয়, ফলে সবুজ পটাশিয়াম ম্যাঙ্গানেট উৎপন্ন হয়: 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O এরপর প্রশম বা আম্লিক দ্রবণে ম্যাঙ্গানেটের অসমবিভাজন (disproportionation) ঘটিয়ে (অথবা তড়িৎবিশ্লেষণে জারিত করে) পারম্যাঙ্গানেট পাওয়া যায়: 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O (b) Mn এখানে +7 অবস্থায় (d⁰) থাকে, তাই d–d স্থানান্তর সম্ভব নয়। দৃশ্যমান আলো শোষণ করে অক্সিজেন (লিগ্যান্ড) থেকে Mn-এর শূন্য d কক্ষকে ইলেকট্রন স্থানান্তরের (charge transfer) ফলে রং দেখা যায়।Revise: d- and f-Block Elements (d- ও f-ব্লক মৌল) — Sem IV →
- 2.7Postulates: 1. The central metal shows two types of valency: primary and secondary. 2. The primary valency corresponds to the oxidation state; it is ionisable and is satisfied by negative ions. 3. The secondary valency corresponds to the coordination number; it is non-ionisable, is satisfied by neutral molecules or negative ions (ligands), and is directed in fixed directions in space, which gives the complex its definite geometry. In [Co(NH₃)₅Cl]Cl₂, Co(III) has primary valency 3 and secondary valency 6. One Cl⁻ satisfies both (it is inside the coordination sphere with the five NH₃) and is not ionisable. The other two Cl⁻ satisfy only the primary valency and are ionisable: [Co(NH₃)₅Cl]Cl₂ → [Co(NH₃)₅Cl]²⁺ + 2Cl⁻. So 2 mol AgCl are precipitated per mole of the complex.স্বীকার্য: 1. কেন্দ্রীয় ধাতু দুই ধরনের যোজ্যতা দেখায়: মুখ্য (primary) ও গৌণ (secondary)। 2. মুখ্য যোজ্যতা জারণ অবস্থার সমান; এটি আয়নিত হয় এবং ঋণাত্মক আয়ন দ্বারা পূর্ণ হয়। 3. গৌণ যোজ্যতা সন্নিবেশ সংখ্যার সমান; এটি আয়নিত হয় না, প্রশম অণু বা ঋণাত্মক আয়ন (লিগ্যান্ড) দ্বারা পূর্ণ হয় এবং স্থানে নির্দিষ্ট অভিমুখী, যা জটিল যৌগের নির্দিষ্ট জ্যামিতিক গঠন ঠিক করে। [Co(NH₃)₅Cl]Cl₂-এ Co(III)-এর মুখ্য যোজ্যতা 3 ও গৌণ যোজ্যতা 6। একটি Cl⁻ উভয় যোজ্যতা পূর্ণ করে (এটি পাঁচটি NH₃-সহ সন্নিবেশ পরিমণ্ডলের ভিতরে থাকে) এবং আয়নিত হয় না। বাকি দুটি Cl⁻ কেবল মুখ্য যোজ্যতা পূর্ণ করে এবং আয়নিত হয়: [Co(NH₃)₅Cl]Cl₂ → [Co(NH₃)₅Cl]²⁺ + 2Cl⁻। তাই প্রতি মোল জটিল যৌগ থেকে 2 mol AgCl অধঃক্ষিপ্ত হয়।Revise: Coordination Compounds (সন্নিবেশ যৌগ) — Sem IV →
- 2.8In both, Ni is +2: Ni²⁺ = [Ar]3d⁸ (two unpaired electrons in the free ion). [Ni(CN)₄]²⁻: CN⁻ is a strong-field ligand and pairs up the two unpaired 3d electrons, leaving one 3d orbital empty. Hybridisation dsp² (3d, 4s, two 4p) → square planar; no unpaired electron → diamagnetic. [NiCl₄]²⁻: Cl⁻ is a weak-field ligand and cannot cause pairing. The 4s and three 4p orbitals hybridise: sp³ → tetrahedral; two unpaired electrons → paramagnetic (μ ≈ 2.83 BM).উভয় ক্ষেত্রে Ni-এর জারণ অবস্থা +2: Ni²⁺ = [Ar]3d⁸ (মুক্ত আয়নে দুটি অযুগ্ম ইলেকট্রন)। [Ni(CN)₄]²⁻: CN⁻ সবল-ক্ষেত্র লিগ্যান্ড, এটি দুটি অযুগ্ম 3d ইলেকট্রনকে যুগ্ম করে একটি 3d কক্ষক খালি করে দেয়। সংকরায়ণ dsp² (3d, 4s, দুটি 4p) → বর্গাকার সমতলীয়; অযুগ্ম ইলেকট্রন নেই → তিরশ্চৌম্বক (diamagnetic)। [NiCl₄]²⁻: Cl⁻ দুর্বল-ক্ষেত্র লিগ্যান্ড, যুগ্মন ঘটাতে পারে না। 4s ও তিনটি 4p কক্ষক সংকরিত হয়: sp³ → চতুস্তলকীয়; দুটি অযুগ্ম ইলেকট্রন → অনুচৌম্বক (paramagnetic) (μ ≈ 2.83 BM)।Revise: Coordination Compounds (সন্নিবেশ যৌগ) — Sem IV →
- 2.9Hinsberg's reagent is benzenesulphonyl chloride, C₆H₅SO₂Cl. Primary amine: forms N-alkylbenzenesulphonamide, which has an acidic H on N and dissolves in alkali (KOH): C₆H₅SO₂Cl + RNH₂ → C₆H₅SO₂NHR + HCl (soluble in KOH) Secondary amine: forms N,N-dialkylbenzenesulphonamide, which has no H on N and is insoluble in alkali: C₆H₅SO₂Cl + R₂NH → C₆H₅SO₂NR₂ + HCl (insoluble in KOH) Tertiary amine: has no H on N and does not react with the reagent.হিন্সবার্গ বিকারক হলো বেঞ্জিনসালফোনাইল ক্লোরাইড, C₆H₅SO₂Cl। প্রাইমারি অ্যামিন: N-অ্যালকাইলবেঞ্জিনসালফোনামাইড উৎপন্ন করে, যার N-এ একটি আম্লিক H থাকে এবং এটি ক্ষারে (KOH) দ্রবীভূত হয়: C₆H₅SO₂Cl + RNH₂ → C₆H₅SO₂NHR + HCl (KOH-এ দ্রাব্য) সেকেন্ডারি অ্যামিন: N,N-ডাইঅ্যালকাইলবেঞ্জিনসালফোনামাইড উৎপন্ন করে, যার N-এ কোনো H নেই এবং এটি ক্ষারে অদ্রাব্য: C₆H₅SO₂Cl + R₂NH → C₆H₅SO₂NR₂ + HCl (KOH-এ অদ্রাব্য) টার্শিয়ারি অ্যামিন: N-এ H না থাকায় বিকারকের সঙ্গে বিক্রিয়া করে না।Revise: Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
- 2.10(a) Sandmeyer reaction with cuprous chloride in HCl: C₆H₅N₂⁺Cl⁻ + Cu₂Cl₂/HCl → C₆H₅Cl + N₂ (b) With cuprous cyanide (CuCN/KCN): C₆H₅N₂⁺Cl⁻ + CuCN → C₆H₅CN + N₂ (+ CuCl) (c) Warming with potassium iodide solution (no copper salt needed): C₆H₅N₂⁺Cl⁻ + KI → C₆H₅I + KCl + N₂(a) HCl-এ কিউপ্রাস ক্লোরাইড দিয়ে স্যান্ডমেয়ার বিক্রিয়া: C₆H₅N₂⁺Cl⁻ + Cu₂Cl₂/HCl → C₆H₅Cl + N₂ (b) কিউপ্রাস সায়ানাইড (CuCN/KCN) দিয়ে: C₆H₅N₂⁺Cl⁻ + CuCN → C₆H₅CN + N₂ (+ CuCl) (c) পটাশিয়াম আয়োডাইড দ্রবণসহ উত্তপ্ত করে (কপার লবণ লাগে না): C₆H₅N₂⁺Cl⁻ + KI → C₆H₅I + KCl + N₂Revise: Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
Section C: Descriptive questions
10 marksবর্ণনামূলক প্রশ্ন
Answer 1 of 2 on Chemical Kinetics and 1 of 2 on Aldehydes, Ketones and Carboxylic Acids · 5 marks each
- 3.1(a) Derive the integrated rate equation for a first-order reaction R → P. (3) (b) Show that the half-life of a first-order reaction is independent of the initial concentration. (2)(a) R → P প্রথম ক্রম বিক্রিয়ার সমাকলিত হার সমীকরণ (integrated rate equation) প্রতিষ্ঠা করো। (3) (b) দেখাও যে প্রথম ক্রম বিক্রিয়ার অর্ধায়ু প্রারম্ভিক গাঢ়ত্বের উপর নির্ভর করে না। (2)
- 3.2(a) What is meant by activation energy? Write the Arrhenius equation and name its terms. (2) (b) The rate of a reaction doubles when the temperature is raised from 300 K to 310 K. Calculate the activation energy of the reaction. (R = 8.314 J K⁻¹ mol⁻¹, log 2 = 0.3010) (3)(a) সক্রিয়করণ শক্তি (activation energy) বলতে কী বোঝ? আরহেনিয়াস সমীকরণটি লেখো ও পদগুলির নাম লেখো। (2) (b) উষ্ণতা 300 K থেকে 310 K করলে একটি বিক্রিয়ার হার দ্বিগুণ হয়। বিক্রিয়াটির সক্রিয়করণ শক্তি নির্ণয় করো। (R = 8.314 J K⁻¹ mol⁻¹, log 2 = 0.3010) (3)
- 3.3(a) Why are aldehydes generally more reactive than ketones towards nucleophilic addition? Arrange HCHO, CH₃CHO and CH₃COCH₃ in decreasing order of this reactivity. (2) (b) Why are the α-hydrogens of aldehydes and ketones acidic? Describe the aldol condensation of ethanal with the equation. (3)(a) কেন্দ্রাকর্ষী যুত বিক্রিয়ায় (nucleophilic addition) অ্যালডিহাইড সাধারণত কিটোনের চেয়ে বেশি সক্রিয় কেন? HCHO, CH₃CHO ও CH₃COCH₃-কে এই সক্রিয়তার অধঃক্রমে সাজাও। (2) (b) অ্যালডিহাইড ও কিটোনের α-হাইড্রোজেন আম্লিক কেন? সমীকরণসহ ইথান্যালের অ্যালডল ঘনীভবন বর্ণনা করো। (3)
- 3.4Write the equations for the following name reactions: (a) Rosenmund reduction (1) (b) Stephen reaction (1) (c) Etard reaction (1) (d) Friedel-Crafts acylation of benzene to give acetophenone (1). (e) Why is the palladium catalyst poisoned with BaSO₄ in the Rosenmund reduction? (1)নিচের নামযুক্ত বিক্রিয়াগুলির সমীকরণ লেখো: (a) রোজেনমুন্ড বিজারণ (1) (b) স্টিফেন বিক্রিয়া (1) (c) ইটার্ড বিক্রিয়া (1) (d) বেঞ্জিনের ফ্রিডেল-ক্রাফটস অ্যাসাইলেশনে অ্যাসিটোফেনোন প্রস্তুতি (1)। (e) রোজেনমুন্ড বিজারণে প্যালাডিয়াম অনুঘটককে BaSO₄ দিয়ে বিষক্রিয়া (poison) করা হয় কেন? (1)
Answers — Section C
- 3.1(a) For R → P of first order: rate = −d[R]/dt = k[R]. Rearranging: d[R]/[R] = −k dt. Integrating: ln[R] = −kt + I, where I is the constant of integration. At t = 0, [R] = [R]₀, so I = ln[R]₀. Thus ln[R] = −kt + ln[R]₀, or ln([R]₀/[R]) = kt. k = (1/t) ln([R]₀/[R]) = (2.303/t) log([R]₀/[R]). (b) At t = t½, [R] = [R]₀/2. k = (2.303/t½) log 2 = (2.303 × 0.3010)/t½, so t½ = 0.693/k. Since k is a constant for the reaction at a given temperature, t½ does not contain [R]₀; it is independent of the initial concentration.(a) প্রথম ক্রমের R → P বিক্রিয়ার জন্য: হার = −d[R]/dt = k[R]। সাজিয়ে লিখে: d[R]/[R] = −k dt। সমাকলন করে: ln[R] = −kt + I, যেখানে I সমাকলন ধ্রুবক। t = 0 সময়ে [R] = [R]₀, তাই I = ln[R]₀। সুতরাং ln[R] = −kt + ln[R]₀, অর্থাৎ ln([R]₀/[R]) = kt। k = (1/t) ln([R]₀/[R]) = (2.303/t) log([R]₀/[R])। (b) t = t½ সময়ে [R] = [R]₀/2। k = (2.303/t½) log 2 = (2.303 × 0.3010)/t½, তাই t½ = 0.693/k। নির্দিষ্ট উষ্ণতায় k বিক্রিয়াটির জন্য ধ্রুবক, এবং t½-এর রাশিতে [R]₀ নেই; তাই অর্ধায়ু প্রারম্ভিক গাঢ়ত্বের উপর নির্ভর করে না।Revise: Chemical Kinetics (রাসায়নিক গতিবিদ্যা) — Sem IV →
- 3.2(a) Activation energy (Ea) is the extra energy, over and above the average energy of the reactant molecules, that they must absorb to reach the threshold energy and form the activated complex, so that the collision can give products. Arrhenius equation: k = A e−Ea/RT, where k = rate constant, A = frequency (pre-exponential) factor, Ea = activation energy, R = gas constant, T = absolute temperature. (b) k₂/k₁ = 2, T₁ = 300 K, T₂ = 310 K. log(k₂/k₁) = [Ea/(2.303R)] × [(T₂ − T₁)/(T₁T₂)] 0.3010 = [Ea/(2.303 × 8.314)] × [10/(300 × 310)] Ea = 0.3010 × 2.303 × 8.314 × 93000 / 10 = 53600 J mol⁻¹ ≈ 53.6 kJ mol⁻¹.(a) সক্রিয়করণ শক্তি (Ea) হলো বিক্রিয়ক অণুগুলির গড় শক্তির অতিরিক্ত সেই শক্তি, যা শোষণ করে তারা সূচনা শক্তিতে (threshold energy) পৌঁছায় ও সক্রিয় জটিল (activated complex) গঠন করে, ফলে সংঘর্ষ থেকে বিক্রিয়াজাত পদার্থ তৈরি হয়। আরহেনিয়াস সমীকরণ: k = A e^(−Ea/RT), যেখানে k = হার ধ্রুবক, A = কম্পাঙ্ক (pre-exponential) গুণাঙ্ক, Ea = সক্রিয়করণ শক্তি, R = গ্যাস ধ্রুবক, T = পরম উষ্ণতা। (b) k₂/k₁ = 2, T₁ = 300 K, T₂ = 310 K। log(k₂/k₁) = [Ea/(2.303R)] × [(T₂ − T₁)/(T₁T₂)] 0.3010 = [Ea/(2.303 × 8.314)] × [10/(300 × 310)] Ea = 0.3010 × 2.303 × 8.314 × 93000 / 10 = 53600 J mol⁻¹ ≈ 53.6 kJ mol⁻¹।Revise: Chemical Kinetics (রাসায়নিক গতিবিদ্যা) — Sem IV →
- 3.3(a) Electronic reason: in ketones two alkyl groups (+I effect) reduce the positive charge on the carbonyl carbon more than the single alkyl group of an aldehyde, so a nucleophile is attracted less. Steric reason: two bulky alkyl groups hinder the approach of the nucleophile to the carbonyl carbon more than one alkyl group and an H atom. Order: HCHO > CH₃CHO > CH₃COCH₃. (b) The α-hydrogens are acidic because (i) the C=O group withdraws electrons and (ii) the carbanion (enolate ion) formed after losing the α-H⁺ is stabilised by resonance, the negative charge being shared by the α-carbon and the oxygen: ⁻CH₂–CH=O ↔ CH₂=CH–O⁻. Aldol condensation: two molecules of ethanal, in the presence of dilute NaOH, combine to give 3-hydroxybutanal (aldol), which on heating loses water to give but-2-enal: 2CH₃CHO (dil. NaOH) → CH₃CH(OH)CH₂CHO CH₃CH(OH)CH₂CHO (heat) → CH₃CH=CHCHO + H₂O(a) ইলেকট্রনীয় কারণ: কিটোনে দুটি অ্যালকাইল গ্রুপ (+I প্রভাব) অ্যালডিহাইডের একটি অ্যালকাইল গ্রুপের চেয়ে কার্বনিল কার্বনের ধনাত্মক আধান বেশি কমায়, তাই কেন্দ্রাকর্ষী কম আকৃষ্ট হয়। স্টেরিক কারণ: দুটি বৃহৎ অ্যালকাইল গ্রুপ, একটি অ্যালকাইল গ্রুপ ও একটি H পরমাণুর তুলনায় কার্বনিল কার্বনের দিকে কেন্দ্রাকর্ষীর আগমনে বেশি বাধা দেয়। ক্রম: HCHO > CH₃CHO > CH₃COCH₃। (b) α-হাইড্রোজেন আম্লিক কারণ (i) C=O গ্রুপ ইলেকট্রন আকর্ষণ করে এবং (ii) α-H⁺ ত্যাগের পর উৎপন্ন কার্বঅ্যানায়ন (এনোলেট আয়ন) রেজোন্যান্স দ্বারা সুস্থিত হয়, ঋণাত্মক আধান α-কার্বন ও অক্সিজেনে ভাগ হয়ে থাকে: ⁻CH₂–CH=O ↔ CH₂=CH–O⁻। অ্যালডল ঘনীভবন: লঘু NaOH-এর উপস্থিতিতে দুটি ইথান্যাল অণু যুক্ত হয়ে 3-হাইড্রক্সিবিউটান্যাল (অ্যালডল) দেয়, যা উত্তপ্ত করলে জল ত্যাগ করে বিউট-2-ইন্যাল উৎপন্ন করে: 2CH₃CHO (লঘু NaOH) → CH₃CH(OH)CH₂CHO CH₃CH(OH)CH₂CHO (তাপ) → CH₃CH=CHCHO + H₂ORevise: Aldehydes, Ketones and Carboxylic Acids (অ্যালডিহাইড, কিটোন ও কার্বক্সিলিক অ্যাসিড) — Sem IV →
- 3.4(a) CH₃COCl + H₂ (Pd–BaSO₄) → CH₃CHO + HCl (acid chloride to aldehyde) (b) CH₃CN + SnCl₂ + HCl → CH₃CH=NH·HCl (imine hydrochloride); then CH₃CH=NH + H₂O (H₃O⁺) → CH₃CHO + NH₃ (c) C₆H₅CH₃ + CrO₂Cl₂ (in CS₂) → chromium complex; on hydrolysis (H₃O⁺) → C₆H₅CHO (benzaldehyde) (d) C₆H₆ + CH₃COCl (anhydrous AlCl₃) → C₆H₅COCH₃ + HCl (e) BaSO₄ partly deactivates (poisons) palladium so that the reduction stops at the aldehyde stage; otherwise the aldehyde would be further reduced to the primary alcohol.(a) CH₃COCl + H₂ (Pd–BaSO₄) → CH₃CHO + HCl (অ্যাসিড ক্লোরাইড থেকে অ্যালডিহাইড) (b) CH₃CN + SnCl₂ + HCl → CH₃CH=NH·HCl (ইমাইন হাইড্রোক্লোরাইড); এরপর CH₃CH=NH + H₂O (H₃O⁺) → CH₃CHO + NH₃ (c) C₆H₅CH₃ + CrO₂Cl₂ (CS₂-এ) → ক্রোমিয়াম জটিল; আর্দ্রবিশ্লেষণে (H₃O⁺) → C₆H₅CHO (বেঞ্জালডিহাইড) (d) C₆H₆ + CH₃COCl (অনার্দ্র AlCl₃) → C₆H₅COCH₃ + HCl (e) BaSO₄ প্যালাডিয়ামকে আংশিকভাবে নিষ্ক্রিয় (বিষক্রিয়া) করে, ফলে বিজারণ অ্যালডিহাইড স্তরেই থেমে যায়; না হলে অ্যালডিহাইড আরও বিজারিত হয়ে প্রাইমারি অ্যালকোহলে পরিণত হতো।Revise: Aldehydes, Ketones and Carboxylic Acids (অ্যালডিহাইড, কিটোন ও কার্বক্সিলিক অ্যাসিড) — Sem IV →
Next step: practise the chapters this paper tests
এই প্রশ্নপত্রের অধ্যায়গুলো অনুশীলন করো
Each link opens that chapter's MCQ practice test, in English and Bengali with solutions.
- Electrochemistry (তড়িৎ-রসায়ন) — Sem IV →
- Chemical Kinetics (রাসায়নিক গতিবিদ্যা) — Sem IV →
- Coordination Compounds (সন্নিবেশ যৌগ) — Sem IV →
- Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ) — Sem IV →
- d- and f-Block Elements (d- ও f-ব্লক মৌল) — Sem IV →
- Aldehydes, Ketones and Carboxylic Acids (অ্যালডিহাইড, কিটোন ও কার্বক্সিলিক অ্যাসিড) — Sem IV →