Higher Secondary 2027 (WBCHSE) · পদার্থবিদ্যা

Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV

20 practice questions with full step-by-step solutions, quick revision notes, 10 written questions with model answers — free, no sign-up.

Show first:

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
10
medium
3
hard

Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV — quick revision notes

Electronic Devices is a Semester IV chapter of WBCHSE HS Physics that starts with thermionic emission and vacuum tubes, then moves to semiconductors: energy bands, intrinsic and extrinsic semiconductors, and the p-n junction diode. It covers special diodes (LED, photodiode, solar cell, Zener regulator), transistor action, the common-emitter amplifier and the transistor as a switch. It ends with analogue and digital signals, binary numbers and logic gates. Semester IV is a written paper, so these MCQs are concept checks to test your understanding before you write full answers.ইলেকট্রনিক ডিভাইস WBCHSE HS পদার্থবিদ্যার সেমিস্টার IV-এর একটি অধ্যায়। এটি তাপ-আয়নীয় নিঃসরণ ও ভ্যাকুয়াম টিউব দিয়ে শুরু হয়ে অর্ধপরিবাহীতে যায়: শক্তিপটি, নিজস্ব ও বহির্জাত অর্ধপরিবাহী এবং p-n সংযোগ ডায়োড। এতে বিশেষ ডায়োড (LED, ফটোডায়োড, সৌরকোশ, ভোল্টেজ নিয়ন্ত্রক হিসেবে জেনার ডায়োড), ট্রানজিস্টর ক্রিয়া, সাধারণ নিঃসারক বিবর্ধক এবং সুইচ হিসেবে ট্রানজিস্টর আলোচিত হয়েছে। শেষে আছে অ্যানালগ ও ডিজিটাল সংকেত, বাইনারি সংখ্যা ও লজিক গেট। সেমিস্টার IV লিখিত পরীক্ষা, তাই পূর্ণ উত্তর লেখার আগে নিজের ধারণা যাচাই করতে এই MCQ-গুলি কাজে লাগবে।
  • Thermionic emission: a heated metal surface emits electrons. In a vacuum diode, current flows only when the plate is positive with respect to the cathode, so the diode acts as a rectifier.তাপ-আয়নীয় নিঃসরণ: উত্তপ্ত ধাতব তল থেকে ইলেকট্রন নির্গত হয়। ভ্যাকুয়াম ডায়োডে প্লেট ক্যাথোডের সাপেক্ষে ধনাত্মক হলে তবেই প্রবাহ চলে, তাই ডায়োডটি একমুখীকারক (rectifier) হিসেবে কাজ করে।
  • Triode constants: amplification factor μ = r_p × g_m (plate resistance × mutual conductance).ট্রায়োডের ধ্রুবক: বিবর্ধন গুণাঙ্ক μ = r_p × g_m (প্লেট রোধ × পারস্পরিক পরিবাহিতা)।
  • Band gap: conductor - bands overlap; semiconductor - about 1 eV (Si ≈ 1.1 eV, Ge ≈ 0.7 eV); insulator - more than 3 eV.শক্তি ব্যবধান: পরিবাহীতে পটিগুলি পরস্পরের উপর চাপানো থাকে; অর্ধপরিবাহীতে প্রায় 1 eV (Si ≈ 1.1 eV, Ge ≈ 0.7 eV); অন্তরকে 3 eV-এর বেশি।
  • Pentavalent doping (P, As) gives n-type material (electrons are the majority carriers). Trivalent doping (B, Al, In) gives p-type material (holes are the majority carriers). In thermal equilibrium n_e × n_h = n_i².পঞ্চযোজী অপদ্রব্য (P, As) মেশালে n-টাইপ অর্ধপরিবাহী হয় (সংখ্যাগুরু বাহক ইলেকট্রন)। ত্রিযোজী অপদ্রব্য (B, Al, In) মেশালে p-টাইপ হয় (সংখ্যাগুরু বাহক হোল)। তাপীয় সাম্যে n_e × n_h = n_i²।
  • A p-n junction under forward bias has a thinner depletion layer and a large current. Under reverse bias, only a small minority-carrier current flows, and it stays almost constant until breakdown.p-n সংযোগে সম্মুখ বায়াসে নিঃশেষিত স্তর সরু হয় ও বেশি প্রবাহ চলে। বিপরীত বায়াসে শুধু সংখ্যালঘু বাহকের সামান্য প্রবাহ চলে, যা ভাঙন (breakdown) পর্যন্ত প্রায় স্থির থাকে।
  • LED photon energy E ≈ E_g, so λ(nm) ≈ 1240 / E_g(eV). A photodiode works in reverse bias. A solar cell needs no external bias (photovoltaic effect). A Zener diode works in reverse breakdown as a voltage regulator.LED-এর ফোটনের শক্তি E ≈ E_g, তাই λ(nm) ≈ 1240 / E_g(eV)। ফটোডায়োড বিপরীত বায়াসে কাজ করে। সৌরকোশে কোনো বাহ্যিক বায়াস লাগে না (আলোক-ভোল্টীয় ক্রিয়া)। জেনার ডায়োড বিপরীত ভাঙন অঞ্চলে ভোল্টেজ নিয়ন্ত্রক হিসেবে কাজ করে।
  • Transistor: I_E = I_B + I_C, α = I_C/I_E, β = I_C/I_B = α/(1−α). In a CE amplifier the voltage gain is A_v = β R_L / R_i, and the output is 180° out of phase with the input. As a switch, the transistor works in cut-off (OFF) and saturation (ON).ট্রানজিস্টর: I_E = I_B + I_C, α = I_C/I_E, β = I_C/I_B = α/(1−α)। CE বিবর্ধকে ভোল্টেজ লাভ A_v = β R_L / R_i এবং নির্গত সংকেত প্রদত্ত সংকেতের সঙ্গে 180° দশা-পার্থক্যে থাকে। সুইচ হিসেবে ট্রানজিস্টর কাট-অফ (OFF) ও সম্পৃক্ত (ON) অবস্থায় কাজ করে।
  • NAND and NOR are universal gates. NAND output is 0 only when all inputs are 1. NOR output is 1 only when all inputs are 0. Boolean form: OR Y = A + B, AND Y = A·B, NOT Y = Ā.NAND ও NOR সর্বজনীন গেট। NAND-এর আউটপুট 0 হয় কেবল সব ইনপুট 1 হলে। NOR-এর আউটপুট 1 হয় কেবল সব ইনপুট 0 হলে। বুলীয় রূপ: OR Y = A + B, AND Y = A·B, NOT Y = Ā।

Common mistakes to avoid

  • Mixing up majority carriers: p-type material is still electrically neutral overall. 'p' refers to holes being the majority carriers, not to a net positive charge.
  • Thinking a photodiode or Zener diode is used in forward bias: both are operated in reverse bias.
  • Forgetting the 180° phase reversal in a CE amplifier, or using α instead of β in the CE gain formula.
  • Reading the Zener current as the full source current: I_Z = I_R − I_L, where I_R = (V_s − V_Z)/R.
Exam tip: For written answers, draw neat labelled circuit diagrams and truth tables. Practise the numericals on I_Z = I_R − I_L, A_v = βR_L/R_i, λ = 1240/E_g and n_e·n_h = n_i², because these come up most often.পরীক্ষার টিপ: লিখিত উত্তরে পরিষ্কার, চিহ্নিত বর্তনী-চিত্র ও সত্যসারণি আঁকো। I_Z = I_R − I_L, A_v = βR_L/R_i, λ = 1240/E_g এবং n_e·n_h = n_i² ব্যবহার করে অঙ্কগুলি অনুশীলন করো, কারণ এগুলিই সবচেয়ে বেশি আসে।

Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV — solved practice questions

12 WB HS Physics (পদার্থবিদ্যা) questions with step-by-step solutions. Attempt each, then reveal the answer.

Take the timed test first

These questions are in the test, so try it before you read the answers below.

Start · 20 questions
  1. Q1easyReport

    The emission of electrons from a metal surface when it is heated to a high temperature is called:

    কোনো ধাতব তলকে উচ্চ উষ্ণতায় উত্তপ্ত করলে তা থেকে ইলেকট্রন নির্গমনকে বলে:
    • ASecondary emissionগৌণ নিঃসরণ
    • BPhotoelectric emissionআলোক-তড়িৎ নিঃসরণ
    • CThermionic emissionতাপ-আয়নীয় নিঃসরণ
    • DField emissionক্ষেত্র নিঃসরণ
    Show answer & solution

    Correct answer: (C) Thermionic emission

    Heating gives the free electrons enough thermal energy to overcome the work function and escape the metal. This is thermionic emission, and it is the basis of vacuum diodes and triodes.উত্তাপে মুক্ত ইলেকট্রনগুলি এত তাপশক্তি পায় যে তারা কার্যাপেক্ষক অতিক্রম করে ধাতু থেকে বেরিয়ে আসে। একেই তাপ-আয়নীয় নিঃসরণ বলে, এবং ভ্যাকুয়াম ডায়োড ও ট্রায়োড এর উপর ভিত্তি করেই কাজ করে।
  2. Q2mediumReport

    A triode has plate resistance r_p = 10 kΩ and mutual conductance g_m = 2 mA/V. Its amplification factor μ is:

    একটি ট্রায়োডের প্লেট রোধ r_p = 10 kΩ এবং পারস্পরিক পরিবাহিতা g_m = 2 mA/V। এর বিবর্ধন গুণাঙ্ক μ হবে:
    • A1212
    • B200200
    • C2020
    • D55
    Show answer & solution

    Correct answer: (C) 20

    μ = r_p × g_m = (10 × 10³ Ω) × (2 × 10⁻³ A/V) = 20.μ = r_p × g_m = (10 × 10³ Ω) × (2 × 10⁻³ A/V) = 20।
  3. Q3easyReport

    The approximate forbidden energy gap of silicon at room temperature is:

    ঘরের উষ্ণতায় সিলিকনের নিষিদ্ধ শক্তি ব্যবধান প্রায়:
    • A6 eV6 eV
    • B1.1 eV1.1 eV
    • C0.01 eV0.01 eV
    • D13.6 eV13.6 eV
    Show answer & solution

    Correct answer: (B) 1.1 eV

    Silicon is a semiconductor with a band gap of about 1.1 eV. Insulators such as diamond have gaps of about 6 eV, and in conductors the bands overlap.সিলিকন একটি অর্ধপরিবাহী, যার শক্তি ব্যবধান প্রায় 1.1 eV। হিরের মতো অন্তরকের ব্যবধান প্রায় 6 eV, আর পরিবাহীতে পটিগুলি পরস্পরের উপর চাপানো থাকে।
  4. Q4easyReport

    When pure silicon is doped with a small amount of phosphorus (a pentavalent element), the result is:

    বিশুদ্ধ সিলিকনে অল্প পরিমাণ ফসফরাস (পঞ্চযোজী মৌল) মেশালে পাওয়া যায়:
    • Aan insulatorএকটি অন্তরক
    • Ban n-type semiconductor with electrons as majority carriersn-টাইপ অর্ধপরিবাহী, যার সংখ্যাগুরু বাহক ইলেকট্রন
    • Can intrinsic semiconductorনিজস্ব (intrinsic) অর্ধপরিবাহী
    • Da p-type semiconductor with holes as majority carriersp-টাইপ অর্ধপরিবাহী, যার সংখ্যাগুরু বাহক হোল
    Show answer & solution

    Correct answer: (B) an n-type semiconductor with electrons as majority carriers

    Phosphorus has five valence electrons. Four of them form covalent bonds and the fifth is donated as a free electron, so the material becomes n-type.ফসফরাসের পাঁচটি যোজ্যতা ইলেকট্রন আছে। চারটি সমযোজী বন্ধন গঠন করে এবং পঞ্চমটি মুক্ত ইলেকট্রন হিসেবে দান করা হয়, তাই পদার্থটি n-টাইপ হয়।
  5. Q5hardReport

    In a silicon sample the intrinsic carrier concentration is n_i = 1.5 × 10¹⁶ m⁻³. After doping, the electron concentration becomes 4.5 × 10²² m⁻³. The hole concentration is:

    একটি সিলিকন নমুনায় নিজস্ব বাহক ঘনত্ব n_i = 1.5 × 10¹⁶ m⁻³। অপদ্রব্য মেশানোর পর ইলেকট্রন ঘনত্ব হয় 4.5 × 10²² m⁻³। হোলের ঘনত্ব হবে:
    • A4.5 × 10²² m⁻³4.5 × 10²² m⁻³
    • B5 × 10⁹ m⁻³5 × 10⁹ m⁻³
    • C3 × 10⁶ m⁻³3 × 10⁶ m⁻³
    • D1.5 × 10¹⁶ m⁻³1.5 × 10¹⁶ m⁻³
    Show answer & solution

    Correct answer: (B) 5 × 10⁹ m⁻³

    n_h = n_i² / n_e = (2.25 × 10³²) / (4.5 × 10²²) = 5 × 10⁹ m⁻³.n_h = n_i² / n_e = (2.25 × 10³²) / (4.5 × 10²²) = 5 × 10⁹ m⁻³।
  6. Q6easyReport

    When a p-n junction diode is forward biased, the width of the depletion layer:

    একটি p-n সংযোগ ডায়োডকে সম্মুখ বায়াস দিলে নিঃশেষিত স্তরের প্রস্থ:
    • Afirst increases and then becomes infiniteপ্রথমে বাড়ে, তারপর অসীম হয়
    • Bremains unchangedঅপরিবর্তিত থাকে
    • Cdecreasesকমে
    • Dincreasesবাড়ে
    Show answer & solution

    Correct answer: (C) decreases

    In forward bias the applied voltage opposes the barrier potential. Majority carriers are pushed towards the junction, so the depletion layer becomes thinner.সম্মুখ বায়াসে প্রযুক্ত বিভব বিভব-প্রাচীরের বিরোধিতা করে। সংখ্যাগুরু বাহকরা সংযোগের দিকে ঠেলে যায়, তাই নিঃশেষিত স্তর সরু হয়।
  7. Q7mediumReport

    A silicon diode (forward voltage drop 0.7 V) is connected in forward bias in series with a 430 Ω resistor across a 5 V battery. The current in the circuit is:

    একটি সিলিকন ডায়োড (সম্মুখ বিভব-পতন 0.7 V) একটি 430 Ω রোধের সঙ্গে শ্রেণিতে 5 V ব্যাটারির সঙ্গে সম্মুখ বায়াসে যুক্ত। বর্তনীতে প্রবাহ হবে:
    • A100 mA100 mA
    • B10 mA10 mA
    • C1.6 mA1.6 mA
    • D11.6 mA11.6 mA
    Show answer & solution

    Correct answer: (B) 10 mA

    Voltage across the resistor = 5 − 0.7 = 4.3 V, so I = 4.3 / 430 = 0.01 A = 10 mA.রোধের দুই প্রান্তে বিভব = 5 − 0.7 = 4.3 V, তাই I = 4.3 / 430 = 0.01 A = 10 mA।
  8. Q8mediumReport

    The small current in a reverse-biased p-n junction (below breakdown) is mainly due to:

    বিপরীত বায়াসে থাকা p-n সংযোগে (ভাঙনের আগে) সামান্য প্রবাহের মূল কারণ:
    • Aminority carriers, and it is almost independent of the reverse voltageসংখ্যালঘু বাহক, এবং এটি বিপরীত বিভবের উপর প্রায় নির্ভর করে না
    • Bmajority carriers, and it rises sharply with voltageসংখ্যাগুরু বাহক, এবং বিভবের সঙ্গে দ্রুত বাড়ে
    • Cphotons emitted at the junctionসংযোগে নির্গত ফোটন
    • Dthe doping atoms moving across the junctionঅপদ্রব্য পরমাণুগুলির সংযোগ পেরিয়ে চলাচল
    Show answer & solution

    Correct answer: (A) minority carriers, and it is almost independent of the reverse voltage

    Reverse bias stops majority-carrier flow. The tiny current that remains comes from thermally generated minority carriers, and it stays nearly constant (saturation) until breakdown.বিপরীত বায়াস সংখ্যাগুরু বাহকের প্রবাহ বন্ধ করে দেয়। যে সামান্য প্রবাহ থাকে তা তাপে উৎপন্ন সংখ্যালঘু বাহকের জন্য, এবং ভাঙন পর্যন্ত এটি প্রায় স্থির (সম্পৃক্ত) থাকে।
  9. Q9mediumReport

    An LED is made from a semiconductor with band gap 2 eV. The wavelength of the emitted light is about (take hc = 1240 eV nm):

    2 eV শক্তি ব্যবধানের অর্ধপরিবাহী দিয়ে একটি LED তৈরি। নির্গত আলোর তরঙ্গদৈর্ঘ্য প্রায় (hc = 1240 eV nm ধরো):
    • A2480 nm2480 nm
    • B620 nm620 nm
    • C1240 nm1240 nm
    • D310 nm310 nm
    Show answer & solution

    Correct answer: (B) 620 nm

    λ = hc / E_g = 1240 / 2 = 620 nm, which is red light. Cross-check: (6.63 × 10⁻³⁴ × 3 × 10⁸) / (2 × 1.6 × 10⁻¹⁹) ≈ 6.2 × 10⁻⁷ m.λ = hc / E_g = 1240 / 2 = 620 nm, যা লাল আলো। মিলিয়ে দেখা: (6.63 × 10⁻³⁴ × 3 × 10⁸) / (2 × 1.6 × 10⁻¹⁹) ≈ 6.2 × 10⁻⁷ m।
  10. Q10mediumReport

    A photodiode is normally operated in:

    একটি ফটোডায়োডকে সাধারণত কোন অবস্থায় ব্যবহার করা হয়?
    • Aforward bias, because the current is largerসম্মুখ বায়াসে, কারণ প্রবাহ বেশি হয়
    • Breverse breakdown region, like a Zener diodeবিপরীত ভাঙন অঞ্চলে, জেনার ডায়োডের মতো
    • Czero bias only, like a batteryকেবল শূন্য বায়াসে, ব্যাটারির মতো
    • Dreverse bias, because the fractional change in current due to light is much largerবিপরীত বায়াসে, কারণ আলোর জন্য প্রবাহের আনুপাতিক পরিবর্তন অনেক বেশি হয়
    Show answer & solution

    Correct answer: (D) reverse bias, because the fractional change in current due to light is much larger

    The reverse current is small, so the extra minority carriers produced by light change it by a large fraction. This makes the photodiode a sensitive light detector in reverse bias.বিপরীত প্রবাহ খুব কম, তাই আলোয় সৃষ্ট অতিরিক্ত সংখ্যালঘু বাহক একে অনেক বেশি অনুপাতে বদলে দেয়। এজন্য বিপরীত বায়াসে ফটোডায়োড সংবেদনশীল আলোক-শনাক্তকারক হিসেবে কাজ করে।
  11. Q11mediumReport

    Which statement about a solar cell is correct?

    সৌরকোশ সম্পর্কে কোন উক্তিটি সঠিক?
    • AIt converts electrical energy into lightএটি তড়িৎশক্তিকে আলোকশক্তিতে রূপান্তরিত করে
    • BIt needs a reverse-bias battery to workকাজ করার জন্য এতে বিপরীত বায়াসের ব্যাটারি লাগে
    • CIt produces an emf without any external bias when light falls on the junctionসংযোগে আলো পড়লে কোনো বাহ্যিক বায়াস ছাড়াই এটি তড়িচ্চালক বল উৎপন্ন করে
    • DIt works only in the reverse breakdown regionএটি কেবল বিপরীত ভাঙন অঞ্চলে কাজ করে
    Show answer & solution

    Correct answer: (C) It produces an emf without any external bias when light falls on the junction

    A solar cell is an unbiased p-n junction. Light creates electron-hole pairs, and the junction field separates them, producing a photo-voltage (photovoltaic effect).সৌরকোশ একটি বায়াসহীন p-n সংযোগ। আলো ইলেকট্রন-হোল জোড় সৃষ্টি করে এবং সংযোগের তড়িৎক্ষেত্র তাদের আলাদা করে আলোক-বিভব উৎপন্ন করে (আলোক-ভোল্টীয় ক্রিয়া)।
  12. Q12hardReport

    A 6 V Zener diode is connected with a 900 Ω series resistor across a 15 V supply, and a 1.2 kΩ load is connected across the Zener. The current through the Zener diode is:

    একটি 6 V জেনার ডায়োড 900 Ω শ্রেণি-রোধের সঙ্গে 15 V উৎসে যুক্ত, এবং জেনারের সমান্তরালে 1.2 kΩ লোড যুক্ত। জেনার ডায়োডের মধ্য দিয়ে প্রবাহ:
    • A10 mA10 mA
    • B16.7 mA16.7 mA
    • C5 mA5 mA
    • D15 mA15 mA
    Show answer & solution

    Correct answer: (C) 5 mA

    I_R = (15 − 6)/900 = 10 mA and I_L = 6/1200 = 5 mA, so I_Z = I_R − I_L = 5 mA.I_R = (15 − 6)/900 = 10 mA এবং I_L = 6/1200 = 5 mA, তাই I_Z = I_R − I_L = 5 mA।

Want the full set? Practise all 20 Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV questions →

Electronic Devices (ইলেকট্রনিক ডিভাইস) — Sem IV — written answers with model answers

Most WB HS marks come from written answers. Write yours the way you would in the exam, then compare it with the model answer and tick the marking points you covered.

Short answers (3 marks)

  1. Q1 · Short3 marks
    Distinguish between n-type and p-type semiconductors (three points).n-টাইপ ও p-টাইপ অর্ধপরিবাহীর মধ্যে তিনটি পার্থক্য লেখো।
    Model answer & marking points1. Impurity: n-type is made by adding a pentavalent impurity (P, As); p-type by adding a trivalent impurity (B, Al, In). 2. Majority carriers: in n-type, electrons are the majority carriers and holes the minority carriers; in p-type, holes are the majority carriers and electrons the minority carriers. 3. Impurity type and energy level: the pentavalent atom is a donor and creates a donor level just below the conduction band; the trivalent atom is an acceptor and creates an acceptor level just above the valence band.1. অপদ্রব্য: পঞ্চযোজী অপদ্রব্য (P, As) মিশিয়ে n-টাইপ তৈরি হয়; ত্রিযোজী অপদ্রব্য (B, Al, In) মিশিয়ে p-টাইপ তৈরি হয়। 2. সংখ্যাগুরু বাহক: n-টাইপে ইলেকট্রন সংখ্যাগুরু এবং হোল সংখ্যালঘু বাহক; p-টাইপে হোল সংখ্যাগুরু এবং ইলেকট্রন সংখ্যালঘু বাহক। 3. অপদ্রব্যের ধরন ও শক্তিস্তর: পঞ্চযোজী পরমাণু দাতা (donor), এটি পরিবহণ পটির ঠিক নীচে দাতা স্তর সৃষ্টি করে; ত্রিযোজী পরমাণু গ্রহীতা (acceptor), এটি যোজ্যতা পটির ঠিক উপরে গ্রহীতা স্তর সৃষ্টি করে।

    Tick what your answer has:

  2. Q2 · Short3 marks
    (a) An LED is made of a semiconductor of band gap 1.9 eV. Find the wavelength of the light it emits and name its colour. (Take hc = 1240 eV nm.) (2) (b) Why is a photodiode operated in reverse bias? (1)(a) 1.9 eV শক্তি-ব্যবধানের (band gap) একটি অর্ধপরিবাহী দিয়ে একটি LED তৈরি। এটি থেকে নিঃসৃত আলোর তরঙ্গদৈর্ঘ্য নির্ণয় করো এবং বর্ণের নাম লেখো। (hc = 1240 eV nm ধরো।) (2) (b) ফটোডায়োডকে বিপরীত বায়াসে (reverse bias) চালানো হয় কেন? (1)
    Model answer & marking points(a) Photon energy ≈ Eg, so λ = hc/Eg = 1240/1.9 ≈ 653 nm. This lies in the red region, so the LED gives red light. (b) In reverse bias the current is only the small minority-carrier current. Light creates extra electron-hole pairs, which changes this small current by a large fraction, so the change in current with light intensity is easy to measure.(a) ফোটনের শক্তি ≈ Eg, তাই λ = hc/Eg = 1240/1.9 ≈ 653 nm। এটি লাল অঞ্চলে, তাই LED-টি লাল আলো দেয়। (b) বিপরীত বায়াসে প্রবাহ কেবল সংখ্যালঘু বাহকজনিত ক্ষুদ্র প্রবাহ। আলো অতিরিক্ত ইলেকট্রন-হোল জোড় তৈরি করে, যা এই ক্ষুদ্র প্রবাহকে আনুপাতিকভাবে অনেকটা বদলে দেয়, তাই আলোর তীব্রতার সঙ্গে প্রবাহের পরিবর্তন সহজে মাপা যায়।

    Tick what your answer has:

  3. Q3 · Short3 marks
    In a transistor the emitter current is 10 mA and the collector current is 9.8 mA. Find the base current, the current gain α and the current gain β.একটি ট্রানজিস্টরে নিঃসারক (emitter) প্রবাহ 10 mA এবং সংগ্রাহক (collector) প্রবাহ 9.8 mA। পীঠ (base) প্রবাহ, প্রবাহ লাভ α এবং প্রবাহ লাভ β নির্ণয় করো।
    Model answer & marking pointsI_B = I_E - I_C = 10 - 9.8 = 0.2 mA. α = I_C/I_E = 9.8/10 = 0.98. β = I_C/I_B = 9.8/0.2 = 49. (Check: α/(1 - α) = 0.98/0.02 = 49.)I_B = I_E - I_C = 10 - 9.8 = 0.2 mA। α = I_C/I_E = 9.8/10 = 0.98। β = I_C/I_B = 9.8/0.2 = 49। (যাচাই: α/(1 - α) = 0.98/0.02 = 49।)

    Tick what your answer has:

  4. Q4 · Short3 marks
    A pure silicon crystal has an intrinsic carrier concentration of 1.5 × 10¹⁶ m⁻³. It is doped so that the electron concentration becomes 4.5 × 10²² m⁻³. Find the hole concentration. Is the doped crystal n-type or p-type? Name one suitable dopant.বিশুদ্ধ সিলিকন কেলাসে নিজস্ব (intrinsic) বাহক ঘনত্ব 1.5 × 10¹⁶ m⁻³। এটিকে এমনভাবে অপমিশ্রিত (doped) করা হল যে ইলেকট্রন ঘনত্ব 4.5 × 10²² m⁻³ হয়। হোল ঘনত্ব নির্ণয় করো। অপমিশ্রিত কেলাসটি n-টাইপ না p-টাইপ? একটি উপযুক্ত অপদ্রব্যের নাম লেখো।
    Model answer & marking pointsIn thermal equilibrium, n_e × n_h = n_i². n_h = n_i²/n_e = (1.5 × 10¹⁶)² / (4.5 × 10²²) = (2.25 × 10³²)/(4.5 × 10²²) = 5 × 10⁹ m⁻³. Since n_e >> n_h, the crystal is n-type; a suitable dopant is phosphorus (or arsenic), a pentavalent element.তাপীয় সাম্যাবস্থায় n_e × n_h = n_i²। n_h = n_i²/n_e = (1.5 × 10¹⁶)² / (4.5 × 10²²) = (2.25 × 10³²)/(4.5 × 10²²) = 5 × 10⁹ m⁻³। যেহেতু n_e >> n_h, কেলাসটি n-টাইপ; উপযুক্ত অপদ্রব্য ফসফরাস (বা আর্সেনিক), যা একটি পঞ্চযোজী মৌল।

    Tick what your answer has:

  5. Q5 · Short3 marks
    (a) Define the plate resistance and the mutual conductance of a triode. (2) (b) A triode has a plate resistance of 10 kΩ and a mutual conductance of 2 mA/V. Find its amplification factor. (1)(a) ট্রায়োডের প্লেট রোধ (plate resistance) ও পারস্পরিক পরিবাহিতা (mutual conductance)-র সংজ্ঞা দাও। (2) (b) একটি ট্রায়োডের প্লেট রোধ 10 kΩ এবং পারস্পরিক পরিবাহিতা 2 mA/V। এর বিবর্ধন গুণাঙ্ক (amplification factor) নির্ণয় করো। (1)
    Model answer & marking points(a) Plate resistance r_p: the ratio of a small change in plate voltage to the resulting change in plate current, with the grid voltage kept constant: r_p = (ΔV_p/ΔI_p) at constant V_g. Mutual conductance g_m: the ratio of a small change in plate current to the change in grid voltage that causes it, with the plate voltage kept constant: g_m = (ΔI_p/ΔV_g) at constant V_p. (b) μ = r_p × g_m = (10 × 10³ Ω) × (2 × 10⁻³ A/V) = 20.(a) প্লেট রোধ r_p: গ্রিড বিভব স্থির রেখে প্লেট বিভবের ক্ষুদ্র পরিবর্তন ও তার ফলে প্লেট প্রবাহের পরিবর্তনের অনুপাত: স্থির V_g-তে r_p = ΔV_p/ΔI_p। পারস্পরিক পরিবাহিতা g_m: প্লেট বিভব স্থির রেখে প্লেট প্রবাহের ক্ষুদ্র পরিবর্তন ও তার জন্য দায়ী গ্রিড বিভবের পরিবর্তনের অনুপাত: স্থির V_p-তে g_m = ΔI_p/ΔV_g। (b) μ = r_p × g_m = (10 × 10³ Ω) × (2 × 10⁻³ A/V) = 20।

    Tick what your answer has:

Long answers (5 marks)

  1. Q6 · Long5 marks
    Explain how a depletion layer and a potential barrier are formed in a p-n junction. Describe the behaviour of the junction under forward bias and reverse bias, and describe its I-V characteristic.p-n সংযোগে নিঃশেষিত স্তর (depletion layer) ও বিভব প্রাচীর (potential barrier) কীভাবে গঠিত হয় ব্যাখ্যা করো। সম্মুখ বায়াস (forward bias) ও বিপরীত বায়াসে সংযোগের আচরণ বর্ণনা করো এবং এর I-V বৈশিষ্ট্যলেখ বর্ণনা করো।
    Model answer & marking pointsFormation: when p and n regions are joined, electrons diffuse from the n-side to the p-side and holes from the p-side to the n-side, and they recombine near the junction. This leaves uncovered positive donor ions on the n-side and negative acceptor ions on the p-side. This thin region, empty of mobile charge carriers, is the depletion layer. The ions set up an electric field from n to p, which opposes further diffusion; the potential difference across the layer is the potential barrier (about 0.7 V for Si, 0.3 V for Ge). Forward bias (p to positive, n to negative terminal): the applied voltage opposes the barrier, the depletion layer becomes thinner, majority carriers cross easily and a large current (mA) flows. Reverse bias (p to negative, n to positive): the applied voltage adds to the barrier, the depletion layer widens, and only a very small current (μA) due to minority carriers flows; it stays almost constant until breakdown. I-V characteristic (diagram: forward current on the upper right, reverse current on the lower left): in forward bias the current is almost zero up to the knee (threshold) voltage and then rises sharply (non-linearly); in reverse bias a tiny, almost constant current flows until, at the breakdown voltage, the current increases suddenly.গঠন: p ও n অঞ্চল যুক্ত করলে ইলেকট্রন n-দিক থেকে p-দিকে এবং হোল p-দিক থেকে n-দিকে ব্যাপিত হয় এবং সংযোগের কাছে পুনর্মিলিত হয়। ফলে n-দিকে অনাবৃত ধনাত্মক দাতা আয়ন এবং p-দিকে ঋণাত্মক গ্রহীতা আয়ন থেকে যায়। চলমান আধানবাহকশূন্য এই সরু অঞ্চলই নিঃশেষিত স্তর। আয়নগুলি n থেকে p-এর দিকে একটি তড়িৎক্ষেত্র তৈরি করে, যা আরও ব্যাপনে বাধা দেয়; স্তরের দুই প্রান্তের বিভবপার্থক্যই বিভব প্রাচীর (Si-এর ক্ষেত্রে প্রায় 0.7 V, Ge-এর ক্ষেত্রে 0.3 V)। সম্মুখ বায়াস (p ধনাত্মক প্রান্তে, n ঋণাত্মক প্রান্তে): প্রযুক্ত বিভব প্রাচীরের বিপরীতে কাজ করে, নিঃশেষিত স্তর সরু হয়, সংখ্যাগুরু বাহক সহজে অতিক্রম করে এবং বড়ো প্রবাহ (mA) চলে। বিপরীত বায়াস (p ঋণাত্মক, n ধনাত্মক প্রান্তে): প্রযুক্ত বিভব প্রাচীরের সঙ্গে যুক্ত হয়, নিঃশেষিত স্তর চওড়া হয় এবং কেবল সংখ্যালঘু বাহকজনিত অতি ক্ষুদ্র প্রবাহ (μA) চলে; ভাঙন (breakdown) পর্যন্ত এটি প্রায় স্থির থাকে। I-V বৈশিষ্ট্যলেখ (চিত্র: উপরে ডানদিকে সম্মুখ প্রবাহ, নীচে বাঁদিকে বিপরীত প্রবাহ): সম্মুখ বায়াসে নী (knee) বা সূচন বিভব পর্যন্ত প্রবাহ প্রায় শূন্য, তারপর দ্রুত (অরৈখিকভাবে) বাড়ে; বিপরীত বায়াসে অতি ক্ষুদ্র প্রায় স্থির প্রবাহ চলে এবং ভাঙন বিভবে প্রবাহ হঠাৎ বেড়ে যায়।

    Tick what your answer has:

  2. Q7 · Long5 marks
    (a) With a circuit description, explain how two p-n junction diodes can be used as a full-wave rectifier. Describe the input and output waveforms. (3) (b) How does a Zener diode work as a voltage regulator? (2)(a) বর্তনীর বর্ণনাসহ ব্যাখ্যা করো, কীভাবে দুটি p-n সংযোগ ডায়োড পূর্ণ-তরঙ্গ একমুখীকারক (full-wave rectifier) হিসেবে ব্যবহার করা যায়। ইনপুট ও আউটপুট তরঙ্গরূপ বর্ণনা করো। (3) (b) জেনার ডায়োড কীভাবে বিভব নিয়ন্ত্রক (voltage regulator) হিসেবে কাজ করে? (2)
    Model answer & marking points(a) Circuit: the AC input is applied to the primary of a centre-tap transformer. The two ends A and B of the secondary are joined to the p-sides of diodes D1 and D2; their n-sides are joined together and connected through the load resistance R_L to the centre tap. Working: in one half-cycle A is positive with respect to the centre tap, so D1 is forward biased and conducts while D2 is reverse biased; current flows through R_L in one direction. In the next half-cycle B is positive, so D2 conducts and D1 does not; the current through R_L is again in the same direction. Waveforms: the input is a sine wave; the output across R_L is a series of positive half-waves with no gaps (pulsating DC), one pulse for every half-cycle, so the output frequency is twice the input frequency. (b) The Zener diode is connected in reverse bias in parallel with the load, with a series resistance R_s in the supply line. In breakdown, the voltage across the Zener stays almost constant (V_Z) over a wide range of current. If the input voltage or the load current changes, the Zener current changes and the extra voltage drops across R_s, so the load voltage stays fixed at V_Z.(a) বর্তনী: AC ইনপুট একটি মধ্য-সংযোগযুক্ত (centre-tap) ট্রান্সফর্মারের মুখ্য কুণ্ডলীতে দেওয়া হয়। গৌণ কুণ্ডলীর দুই প্রান্ত A ও B ডায়োড D1 ও D2-এর p-দিকের সঙ্গে যুক্ত; তাদের n-দিক একসঙ্গে যুক্ত করে লোড রোধ R_L-এর মধ্য দিয়ে মধ্য-সংযোগে যুক্ত। কার্যপ্রণালী: একটি অর্ধচক্রে A মধ্য-সংযোগের সাপেক্ষে ধনাত্মক, তাই D1 সম্মুখ বায়াসে পরিবহণ করে এবং D2 বিপরীত বায়াসে থাকে; R_L-এর মধ্য দিয়ে একদিকে প্রবাহ চলে। পরের অর্ধচক্রে B ধনাত্মক, তাই D2 পরিবহণ করে, D1 করে না; R_L-এর মধ্য দিয়ে প্রবাহ আবার একই দিকে চলে। তরঙ্গরূপ: ইনপুট একটি সাইন তরঙ্গ; R_L-এর দুই প্রান্তে আউটপুট হল ফাঁকহীন ধনাত্মক অর্ধতরঙ্গের সারি (স্পন্দিত DC), প্রতি অর্ধচক্রে একটি স্পন্দন, তাই আউটপুটের কম্পাঙ্ক ইনপুটের দ্বিগুণ। (b) জেনার ডায়োডকে বিপরীত বায়াসে লোডের সঙ্গে সমান্তরালে যুক্ত করা হয় এবং সরবরাহ লাইনে একটি শ্রেণি রোধ R_s রাখা হয়। ভাঙন অবস্থায় প্রবাহের বিস্তৃত পরিসরে জেনারের দুই প্রান্তের বিভব প্রায় স্থির (V_Z) থাকে। ইনপুট বিভব বা লোড প্রবাহ বদলালে জেনার প্রবাহ বদলায় এবং অতিরিক্ত বিভব R_s-এ পতিত হয়, ফলে লোডের বিভব V_Z-তে স্থির থাকে।

    Tick what your answer has:

  3. Q8 · Long5 marks
    (a) Describe the working of an n-p-n transistor as a common-emitter amplifier, and explain why the output voltage is 180° out of phase with the input. (3) (b) In a CE amplifier, β = 100, the load resistance is 4 kΩ and the input resistance is 1 kΩ. Find the voltage gain and the power gain. (2)(a) সাধারণ-নিঃসারক (common-emitter) বিবর্ধক হিসেবে একটি n-p-n ট্রানজিস্টরের কার্যপ্রণালী বর্ণনা করো এবং আউটপুট বিভব ইনপুটের সঙ্গে 180° দশা-পার্থক্যে থাকে কেন ব্যাখ্যা করো। (3) (b) একটি CE বিবর্ধকে β = 100, লোড রোধ 4 kΩ এবং ইনপুট রোধ 1 kΩ। বিভব লাভ (voltage gain) ও ক্ষমতা লাভ (power gain) নির্ণয় করো। (2)
    Model answer & marking points(a) Circuit: the base-emitter junction is forward biased by V_BB and the collector-emitter is reverse biased by V_CC through the load R_L; the AC input signal v_i is applied in series with V_BB, and the output is taken across collector and emitter. Working: when v_i increases, the base current increases by a small amount ΔI_B, which makes the collector current increase by a much larger amount ΔI_C = βΔI_B. The change in voltage across R_L is ΔI_C R_L, which is much larger than the input change, so the signal is amplified. Phase: V_CE = V_CC - I_C R_L. When the input rises, I_C rises, so the drop I_C R_L rises and V_CE (the output) falls. When the input falls, the output rises. So the output is 180° out of phase with the input. (b) A_v = β R_L/R_i = 100 × 4/1 = 400. Power gain = β × A_v = 100 × 400 = 4 × 10⁴.(a) বর্তনী: V_BB দ্বারা পীঠ-নিঃসারক সংযোগ সম্মুখ বায়াসে এবং লোড R_L-এর মধ্য দিয়ে V_CC দ্বারা সংগ্রাহক-নিঃসারক বিপরীত বায়াসে থাকে; AC ইনপুট সংকেত v_i, V_BB-এর সঙ্গে শ্রেণিতে দেওয়া হয় এবং আউটপুট সংগ্রাহক ও নিঃসারকের মধ্যে নেওয়া হয়। কার্যপ্রণালী: v_i বাড়লে পীঠ প্রবাহ সামান্য ΔI_B বাড়ে, ফলে সংগ্রাহক প্রবাহ অনেক বেশি ΔI_C = βΔI_B বাড়ে। R_L-এর দুই প্রান্তে বিভবের পরিবর্তন ΔI_C R_L, যা ইনপুটের পরিবর্তনের চেয়ে অনেক বেশি, তাই সংকেত বিবর্ধিত হয়। দশা: V_CE = V_CC - I_C R_L। ইনপুট বাড়লে I_C বাড়ে, তাই I_C R_L বাড়ে এবং V_CE (আউটপুট) কমে। ইনপুট কমলে আউটপুট বাড়ে। তাই আউটপুট ইনপুটের সঙ্গে 180° দশা-পার্থক্যে থাকে। (b) A_v = β R_L/R_i = 100 × 4/1 = 400। ক্ষমতা লাভ = β × A_v = 100 × 400 = 4 × 10⁴।

    Tick what your answer has:

  4. Q9 · Long5 marks
    Why is the NAND gate called a universal gate? Show how NOT, AND and OR gates can be obtained using only NAND gates. Give the truth table of a two-input NAND gate.NAND গেটকে সর্বজনীন গেট (universal gate) বলা হয় কেন? কেবল NAND গেট ব্যবহার করে কীভাবে NOT, AND ও OR গেট পাওয়া যায় দেখাও। দুই-ইনপুট NAND গেটের সত্যসারণি (truth table) লেখো।
    Model answer & marking pointsUniversal gate: any basic gate (NOT, AND, OR), and hence any logic circuit, can be built using NAND gates alone. Truth table of NAND (Y = (A·B)‾): A B | Y 0 0 | 1 0 1 | 1 1 0 | 1 1 1 | 0 NOT: join both inputs of one NAND gate to A. Then Y = (A·A)‾ = Ā. AND: feed A and B to a NAND gate and pass its output through a NAND gate wired as NOT. Then Y = ((A·B)‾)‾ = A·B. OR: invert A and B separately with two NAND gates wired as NOT, and feed Ā and B̄ to a third NAND gate. Then Y = (Ā·B̄)‾ = A + B (by De Morgan's theorem). Diagram: three block diagrams showing these connections.সর্বজনীন গেট: যে-কোনো মৌলিক গেট (NOT, AND, OR), এবং তাই যে-কোনো লজিক বর্তনী, কেবল NAND গেট দিয়েই তৈরি করা যায়। NAND-এর সত্যসারণি (Y = (A·B)‾): A B | Y 0 0 | 1 0 1 | 1 1 0 | 1 1 1 | 0 NOT: একটি NAND গেটের দুটি ইনপুটই A-এর সঙ্গে যুক্ত করো। তখন Y = (A·A)‾ = Ā। AND: A ও B একটি NAND গেটে দাও এবং তার আউটপুট NOT হিসেবে যুক্ত একটি NAND গেটের মধ্য দিয়ে পাঠাও। তখন Y = ((A·B)‾)‾ = A·B। OR: NOT হিসেবে যুক্ত দুটি NAND গেট দিয়ে A ও B আলাদাভাবে বিপরীত করো এবং Ā ও B̄ তৃতীয় একটি NAND গেটে দাও। তখন Y = (Ā·B̄)‾ = A + B (ডি মর্গ্যানের উপপাদ্য অনুযায়ী)। চিত্র: এই সংযোগগুলি দেখিয়ে তিনটি ব্লক চিত্র।

    Tick what your answer has:

  5. Q10 · Long5 marks
    (a) On the basis of energy bands, distinguish between conductors, semiconductors and insulators. Give the approximate band gap of silicon and germanium. (3) (b) Explain how a transistor can be used as a switch. (2)(a) শক্তিপটির (energy band) ভিত্তিতে পরিবাহী, অর্ধপরিবাহী ও অন্তরকের মধ্যে পার্থক্য লেখো। সিলিকন ও জার্মেনিয়ামের আনুমানিক শক্তি-ব্যবধান লেখো। (3) (b) ট্রানজিস্টরকে কীভাবে সুইচ হিসেবে ব্যবহার করা যায় ব্যাখ্যা করো। (2)
    Model answer & marking points(a) Conductor: the valence band and conduction band overlap (or the conduction band is partly filled), so there is no band gap and many free electrons are available; conductivity is very high. Semiconductor: there is a small forbidden gap of about 1 eV between a filled valence band and an empty conduction band. At 0 K it behaves as an insulator, but at room temperature some electrons cross the gap and it conducts slightly. Si ≈ 1.1 eV, Ge ≈ 0.7 eV. Insulator: the forbidden gap is large (more than 3 eV), so electrons cannot reach the conduction band at ordinary temperatures and there is practically no conduction. (b) In a CE circuit, when the input (base) voltage is low, the base-emitter junction is not forward biased enough, I_B ≈ 0 and I_C ≈ 0: the transistor is in cut-off, the output V_CE ≈ V_CC (high) and the switch is OFF. When the input voltage is high, the transistor goes into saturation, a large I_C flows, and V_CE ≈ 0 (low): the switch is ON. The transistor is used only in these two states, not in the active region.(a) পরিবাহী: যোজ্যতা পটি ও পরিবহণ পটি পরস্পরের উপর পড়ে (বা পরিবহণ পটি আংশিক পূর্ণ), তাই কোনো শক্তি-ব্যবধান নেই এবং বহু মুক্ত ইলেকট্রন থাকে; পরিবাহিতা খুব বেশি। অর্ধপরিবাহী: পূর্ণ যোজ্যতা পটি ও শূন্য পরিবহণ পটির মধ্যে প্রায় 1 eV-এর ক্ষুদ্র নিষিদ্ধ ব্যবধান থাকে। 0 K-এ এটি অন্তরকের মতো আচরণ করে, কিন্তু ঘরের তাপমাত্রায় কিছু ইলেকট্রন ব্যবধান অতিক্রম করে এবং এটি সামান্য পরিবহণ করে। Si ≈ 1.1 eV, Ge ≈ 0.7 eV। অন্তরক: নিষিদ্ধ ব্যবধান বড়ো (3 eV-এর বেশি), তাই সাধারণ তাপমাত্রায় ইলেকট্রন পরিবহণ পটিতে পৌঁছাতে পারে না এবং কার্যত কোনো পরিবহণ হয় না। (b) CE বর্তনীতে ইনপুট (পীঠ) বিভব কম হলে পীঠ-নিঃসারক সংযোগ যথেষ্ট সম্মুখ বায়াস পায় না, I_B ≈ 0 এবং I_C ≈ 0: ট্রানজিস্টর ছেদন (cut-off) অবস্থায়, আউটপুট V_CE ≈ V_CC (উচ্চ) এবং সুইচ OFF। ইনপুট বিভব বেশি হলে ট্রানজিস্টর সম্পৃক্ত (saturation) অবস্থায় যায়, বড়ো I_C চলে এবং V_CE ≈ 0 (নিম্ন): সুইচ ON। ট্রানজিস্টরকে কেবল এই দুই অবস্থায় ব্যবহার করা হয়, সক্রিয় অঞ্চলে নয়।

    Tick what your answer has:

Ready for a full paper? HS 2027 Semester IV model papers with answers → · The most-marked questions: important questions → · Plan your weeks: Semester IV study plan →