Trigonometry for SSC CGL: Values, Identities and Heights & Distances

A friendly, exam-ready guide to trigonometry for SSC CGL and CHSL: ratios, the standard-value table, identities and the sec ± tan pair trick, complementary angles, maximum and minimum values, and heights and distances, with worked examples and SSC-style traps.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

9 min read · Published 2 November 2026

Part of SSC CGL prep

The ladder against the wall

Lean a ladder against your school wall. The ladder, the wall and the floor make a right triangle. Tilt the ladder more upright and it reaches higher up the wall while its foot moves closer. Trigonometry is a fixed rulebook for this: once you know one angle, the ratios between the three sides are fixed, whatever the size of the ladder. Every SSC trigonometry question is this triangle in a new costume.

What this chapter tests

In SSC CGL Tier-I and CHSL, trigonometry usually gives two or three questions. They come from a few areas: finding one ratio from another, standard values, identities and simplification, complementary angles, maximum and minimum values, and heights and distances. Almost none need long working. They need the value table, three identities and a few tricks you can apply at speed.

The six ratios

sin θ = P/H cos θ = B/H tan θ = P/B cosec θ = H/P sec θ = H/B cot θ = B/P (P = perpendicular, B = base, H = hypotenuse)

Worked example: one ratio from another

If cos θ = 8/17 and θ is acute, find tan θ + sec θ.

Base = 8, hypotenuse = 17.

Perpendicular = √(17² − 8²) = √(289 − 64) = √225 = 15.

tan θ = 15/8 and sec θ = 17/8.

tan θ + sec θ = 32/8 = 4.

The standard-value table

Ratio0°30°45°60°90°
sin01/21/√2√3/21
cos1√3/21/√21/20
tan01/√31√3not defined
cosecnot defined2√22/√31
sec12/√3√22not defined
cotnot defined√311/√30
Memory trick: sin of 0°, 30°, 45°, 60°, 90° is √0/2, √1/2, √2/2, √3/2, √4/2. cos is the same list read backwards, and tan = sin ÷ cos.

Quick check

What is the value of 4 cos²60° + 3 tan²60° − 2 sin²45°?

Three identities and the pair trick

sin²θ + cos²θ = 1 sec²θ − tan²θ = 1 cosec²θ − cot²θ = 1

The last two factorise: (sec θ + tan θ)(sec θ − tan θ) = 1. So if SSC gives you sec θ + tan θ, you get sec θ − tan θ free as its reciprocal, and adding or subtracting the two equations gives sec θ and tan θ in one line. The same works for cosec θ and cot θ.

Worked example: the pair trick

If sec θ + tan θ = 5, find sin θ.

sec θ − tan θ = 1/5.

Add: 2 sec θ = 5 + 1/5 = 26/5, so sec θ = 13/5.

Subtract: 2 tan θ = 5 − 1/5 = 24/5, so tan θ = 12/5.

sin θ = tan θ ÷ sec θ = (12/5) ÷ (13/5) = 12/13.

Option-check shortcut: for 'simplify' questions, put θ = 45° (or 30° if 45° makes two options equal) into the expression and into each option. The one that matches is the answer. For example (1 + tan²θ) cos²θ at 45° is 2 × 1/2 = 1.

Complementary angles

sin(90° − θ) = cos θ tan(90° − θ) = cot θ sec(90° − θ) = cosec θ (and the other way round)

Worked example: solving for θ

If sec 4θ = cosec(θ + 20°), with 4θ acute, find θ.

sec A = cosec B with both angles acute means A + B = 90°.

4θ + θ + 20° = 90°, so 5θ = 70° and θ = 14°.

Check: 4θ = 56° and θ + 20° = 34°, and 56° + 34° = 90°.

Worked example: a long product

Find tan 5° × tan 25° × tan 45° × tan 65° × tan 85°.

tan 85° = cot 5° and tan 65° = cot 25°.

tan 5° × cot 5° = 1, tan 25° × cot 25° = 1, and tan 45° = 1.

Product = 1.

Maximum and minimum values

ExpressionMinimumMaximumExample
a sin θ + b cos θ−√(a² + b²)√(a² + b²)3 sin θ + 4 cos θ lies from −5 to 5
a tan²θ + b cot²θ2√(ab)no maximum4 tan²θ + 9 cot²θ ≥ 12
a sin²θ + b cosec²θ, a ≥ b2√(ab)no maximum25 sin²θ + 16 cosec²θ ≥ 40
a sin²θ + b cosec²θ, a < ba + bno maximum9 sin²θ + 16 cosec²θ ≥ 25
The AM ≥ GM answer 2√(ab) is only correct when the equality point is possible. sin²θ and cos²θ can never be more than 1, so when a < b in the last row the minimum is simply a + b (at θ = 90° for sin, θ = 0° for cos). SSC puts the 2√(ab) value in the options as the trap.

Quick check

What is the maximum value of 7 sin θ + 24 cos θ?

Heights and distances

Solve any heights question in four steps

  1. 1Draw the right triangle: the height is vertical, the ground distance is horizontal.
  2. 2Mark the angle at the observer. The angle of depression from the top equals the angle of elevation from the bottom.
  3. 3Use tan when the height and the ground distance are involved; use sin or cos when a slant length (ladder, string, broken tree) is given.
  4. 4When the observer moves, write one equation for each position and equate the height.

Worked example: observer moves closer

From a point on the ground, the elevation of a tower's top is 30°. After walking 20 m towards it, the elevation is 60°. Find the height.

Let the final distance be x and the height h. tan 60° = h/x, so h = x√3.

tan 30° = h/(x + 20), so h = (x + 20)/√3.

x√3 = (x + 20)/√3 gives 3x = x + 20, so x = 10 m.

h = 10√3 m (about 17.32 m).

Two useful results: if the elevation changes from 30° to 60° as you walk towards a tower, the distance walked is twice the distance still left. If two points at distances a and b from the foot see the top at complementary angles, the height is √(ab).
  • Ratios: sin = P/H, cos = B/H, tan = P/B; the other three are reciprocals.
  • Know the 0°–90° value table without thinking.
  • sin² + cos² = 1, sec² − tan² = 1, cosec² − cot² = 1.
  • sec θ + tan θ = k means sec θ − tan θ = 1/k.
  • sin A = cos B (both acute) means A + B = 90°.
  • Max of a sin θ + b cos θ is √(a² + b²), not a + b.
  • Check that the AM ≥ GM equality point is possible before trusting 2√(ab).
  • Heights: tan for height and ground distance, sin or cos for slant lengths.
Exam strategy: trigonometry questions in SSC are short, so attempt them in your first round. Use value-putting (θ = 45° or 30°) on identity questions, and in heights questions re-read whether the answer asked is a height or a distance before you mark.

Ready to test yourself?

Lock it in with the practice test for this chapter.

Take the practice test

Keep studying

See all SSC CGL study material →