Data Interpretation for SSC CGL & CHSL: Tables, Bar, Line and Pie Charts Made Easy

A step-by-step guide to SSC CGL and CHSL Data Interpretation: read tables, bar graphs, line graphs and pie charts in percent or degrees, and answer percentage, ratio and average questions without falling for the wrong-base and simple-average traps.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

8 min read · Published 2 November 2026

Part of SSC CGL prep

The ration-shop register

Think of the register at a ration shop: rows for each family, columns for rice, wheat and sugar, and a total at the bottom. The shopkeeper can tell you in seconds who took the most rice or how much sugar went out this month, because he knows where each number sits. Data Interpretation is the same skill. The table, bar graph, line graph or pie chart is just a register drawn in a different way. Find the right row, the right column and the right unit, and the maths after that is Class 10 arithmetic.

What SSC asks in DI

In SSC CGL Tier-I and CHSL, Data Interpretation usually gives a small table or chart followed by one question, sometimes a short set of two or three. The questions are about totals, averages, ratios, percentage change and percentage share. Each question carries 2 marks and a wrong answer costs 0.5, so accuracy matters more than speed. In CGL Tier-II, DI sets are longer and use the same skills.

The four shapes of data

ShapeWhat it showsWhat to read first
TableExact values in rows and columnsUnits, row labels and column headings
Bar graphValues for separate items or years as bar heightsThe scale and the unit on the axis
Line graphHow a value changes over timeWhether it plots values or percentage change
Pie chartParts of one whole, as percent or degreesThe total and whether sectors are in % or in degrees
A line graph of percentage change is not a line graph of values. If the graph says '+10% over the previous year', you must multiply step by step from a base value. Reading +10% as 10 units is a very common mistake.

Percentage change and the base

Percentage change = (New value − Old value) ÷ Old value × 100. 'A is what percent more than B' = (A − B) ÷ B × 100. 'B is what percent less than A' = (A − B) ÷ A × 100.

Worked example: the right base

A company's sales were ₹240 crore in 2021 and ₹300 crore in 2023. Find the percentage increase.

Increase = 300 − 240 = ₹60 crore.

The old value is 240, so percentage increase = 60 ÷ 240 × 100 = 25%.

Dividing by 300 gives 20%, which is the most common wrong option.

Reverse question: 2021 sales are what percent less than 2023 sales? Now the base is 300: 60 ÷ 300 × 100 = 20% less.

Quick check

A school had 160 students in 2022 and 200 students in 2023. By what percentage did the number of students rise?

Reading pie charts

A pie chart always shows parts of one total. SSC gives the sectors either as percentages or as central angles. A full circle is 100% and also 360°, so 1% = 3.6° and 1° = 1/360 of the total.

You knowYou wantDo thisExample
PercentAmountpercent × total ÷ 10015% of ₹40,000 = ₹6,000
PercentAnglepercent × 3.624% = 86.4°
AngleAmountangle ÷ 360 × total108° of 3,600 = 1,080
AnglePercentangle ÷ 3.6126° = 35%

Worked example: two sectors without the total

In a pie chart of costs, Royalty is 54° and Printing is 72°. Royalty paid is ₹82,500. Find the printing cost.

Amounts are in the ratio of their angles: Printing ÷ Royalty = 72 ÷ 54 = 4 ÷ 3.

Printing = 82,500 × 4 ÷ 3 = ₹1,10,000.

The total cost was never needed.

Never compare two different pie charts by angle alone. 90° of ₹600 crore is ₹150 crore, but 72° of ₹800 crore is ₹160 crore. The smaller angle is the bigger amount because its total is bigger.

Quick check

In a pie chart of a ₹72,000 budget, the Rent sector has a central angle of 75°. How much is spent on Rent?

Averages and ratios from a table

For an average, add the values you need and divide by how many there are. For a ratio of totals, add each column first and then simplify using the HCF. Pairing numbers that make round sums (120 + 130, 135 + 165) makes the addition much faster.

Worked example: ratio of totals

Factory M made 360, 420 and 480 TV sets in three years; Factory N made 300, 380 and 440.

Total M = 1,260. Total N = 1,120.

HCF of 1,260 and 1,120 is 140, so the ratio = 9 : 8.

The ratio of totals is not the same as the ratio for any single year (2021 alone is 6 : 5).

Successive changes and weighted percentages

Successive changes multiply: final = start × (1 + a/100) × (1 + b/100) × ... Combined percentage of groups = total of the parts ÷ total of the groups × 100, never the simple average of the group percentages.

Worked example: percentage change line graph

Sales were ₹400 crore in 2019. The changes were +15% in 2020, −20% in 2021 and +25% in 2022.

2020 = 400 × 1.15 = 460. 2021 = 460 × 0.8 = 368. 2022 = 368 × 1.25 = 460.

2022 is 15% more than 2019.

Adding the changes (+15 − 20 + 25 = 20%) gives the wrong answer.

Worked example: different group sizes

A student scores 120/150, 68/80, 45/60 and 54/60.

Subject percentages are 80%, 85%, 75% and 90%; their simple average is 82.5%.

Correct method: 287 marks out of 350 = 82%.

Different maximum marks mean the subjects have different weights, so add marks, not percentages.

How to solve any DI question

  1. 1Read the title, units and labels; note whether values are in thousands, lakh or crore and whether a graph shows values or percentage change.
  2. 2Read the question and underline the exact rows, columns or years it needs.
  3. 3Write the base before you divide: the old value for change, the 'than' value for 'more than' or 'less than'.
  4. 4Use fractions you know (1/8 = 12.5%, 1/6 = 16.67%, 1/3 = 33.33%) to avoid long division.
  5. 5Check your answer against the options: the reverse ratio and the wrong-base value are usually there as traps.

Quick check

Two classes have 40 and 60 students. 50% of the first class and 80% of the second class passed. What percentage of all the students passed?

  • Read units and labels first; know whether the graph shows values or percentage change.
  • Percentage change divides by the old value.
  • 'More than B' uses B as the base; 'less than A' uses A as the base.
  • Pie: 1% = 3.6°, amount = angle ÷ 360 × total.
  • Two sectors of one pie are in the ratio of their angles.
  • Compare two pies only after converting angles to amounts.
  • Successive percentage changes multiply, they do not add.
  • Combine groups using actual counts, not the average of percentages.
Exam strategy: DI questions in SSC are often the quickest 2 marks in quant if you read carefully. Spend the first 15 seconds on units and labels, calculate only what the question asks, and use the options to catch a wrong base before you mark.

Ready to test yourself?

Lock it in with the practice test for this chapter.

Take the practice test

Keep studying

See all SSC CGL study material →