NEET (Medical) · Chemistry
Electrochemistry
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electrochemistry — quick revision notes
- E°cell = E°cathode − E°anode, using reduction potentials. Oxidation happens at the anode (negative terminal in a galvanic cell). A more negative E° means a stronger reducing agent.
- Nernst at 298 K: E = E° − (0.059/n) log Q. For a hydrogen electrode, E = −0.059 pH. For a concentration cell, E° = 0 and E = (0.059/n) log(c_cathode/c_anode).
- ΔG° = −nFE°cell; log K = nE°cell/0.059; ΔG° = −2.303RT log K. E° is intensive, while ΔG depends on n and is extensive.
- Resistance R = ρl/A; conductivity κ = G*/R with cell constant G* = l/A; Λm (S cm² mol⁻¹) = κ (S cm⁻¹) × 1000 / M.
- Strong electrolytes: Λm = Λ°m − A√c (extrapolate the graph). Weak electrolytes: use Kohlrausch's law, Λ°m = ν+λ°+ + ν−λ°−; α = Λm/Λ°m and Ka = cα²/(1 − α).
- Faraday's laws: w = (M/nF) × I × t, with 1 F ≈ 96500 C per mol of electrons. For the same charge, the masses deposited are in the ratio of the equivalent masses.
- Electrolysis products: aqueous NaCl gives H2 at the cathode and Cl2 at the anode (overpotential of O2); aqueous CuSO4 with Pt electrodes gives Cu and O2; dilute H2SO4 gives O2 at the anode, while concentrated H2SO4 gives S2O8²⁻.
- Cells: dry cell about 1.5 V (Zn container anode, MnO2 + carbon cathode, moist NH4Cl + ZnCl2 paste); mercury cell 1.35 V, constant because no ions appear in the overall reaction; lead storage battery, where H2SO4 is used up on discharge; H2-O2 fuel cell about 70% efficient (Apollo). Rusting is an electrochemical cell with E° = 1.67 V.
Common mistakes to avoid
- Multiplying E° by the stoichiometric coefficient. E° never scales; only ΔG does.
- Taking n = 1 instead of the true number of electrons transferred in Nernst or log K calculations.
- Forgetting the 1000 conversion and mixing S m² mol⁻¹ with S cm² mol⁻¹ when calculating Λm.
- Predicting Na or O2 in the electrolysis of aqueous NaCl, which ignores the reduction of water and the overpotential of O2.
Electrochemistry — solved practice questions
8 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
In a Daniell cell (Zn | Zn²⁺ || Cu²⁺ | Cu), which electrode is the anode?
- AThe copper electrode, where reduction takes place
- BThe copper electrode, where oxidation takes place
- CThe zinc electrode, where oxidation takes place
- DThe zinc electrode, where reduction takes place
Show answer & solution
Correct answer: (C) The zinc electrode, where oxidation takes place
Zn → Zn²⁺ + 2e⁻ is an oxidation, and oxidation always happens at the anode. In a galvanic cell the anode is the negative terminal. - Q2easyReport
Given E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V, what is E°cell for Zn | Zn²⁺ || Cu²⁺ | Cu?
- A0.42 V
- B−0.42 V
- C−1.10 V
- D1.10 V
Show answer & solution
Correct answer: (D) 1.10 V
E°cell = E°cathode − E°anode = 0.34 − (−0.76) = 1.10 V. - Q3mediumReport
For the cell Mg | Mg²⁺(0.001 M) || Cu²⁺(0.0001 M) | Cu, E°cell = 2.71 V. What is Ecell at 298 K? (Take 2.303RT/F = 0.059 V)
- A2.74 V
- B2.68 V
- C2.71 V
- D2.62 V
Show answer & solution
Correct answer: (B) 2.68 V
Ecell = E° − (0.059/2) log([Mg²⁺]/[Cu²⁺]) = 2.71 − 0.0295 x log(10) = 2.71 − 0.03 = 2.68 V. - Q4mediumReport
E° for the Daniell cell is 1.10 V. What is the standard Gibbs energy change for Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)? (F = 96500 C/mol)
- A−106.15 kJ/mol
- B−212.3 kJ/mol
- C+212.3 kJ/mol
- D−424.6 kJ/mol
Show answer & solution
Correct answer: (B) −212.3 kJ/mol
ΔG° = −nFE° = −2 × 96500 × 1.10 = −212300 J/mol = −212.3 kJ/mol. The negative sign shows the reaction is spontaneous. - Q5hardReport
For Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s), E°cell = 0.46 V at 298 K. What is the approximate equilibrium constant? (Take 2.303RT/F = 0.059 V)
- A3.9 × 1015
- B6.3 × 107
- C15.6
- D2.5 × 10−16
Show answer & solution
Correct answer: (A) 3.9 × 1015
log K = nE°/0.059 = (2 × 0.46)/0.059 = 15.59, so K = 1015.59 ≈ 3.9 × 1015. Option B is what you get if you wrongly take n = 1. - Q6easyReport
Given E°: Li⁺/Li = −3.05 V, K⁺/K = −2.93 V, Mg²⁺/Mg = −2.36 V and Zn²⁺/Zn = −0.76 V. Which metal is the strongest reducing agent?
- ALi
- BMg
- CZn
- DK
Show answer & solution
Correct answer: (A) Li
The most negative reduction potential means the greatest tendency to lose electrons, so Li (−3.05 V) is the strongest reducing agent of the four. - Q7easyReport
Given E°: Cu²⁺/Cu = +0.34 V, Ag⁺/Ag = +0.80 V, Zn²⁺/Zn = −0.76 V, Mg²⁺/Mg = −2.37 V and Fe²⁺/Fe = −0.44 V. Which solution should NOT be stored in a copper vessel?
- AMgSO4 solution
- BZnSO4 solution
- CFeSO4 solution
- DAgNO3 solution
Show answer & solution
Correct answer: (D) AgNO3 solution
Cu + 2Ag⁺ → Cu²⁺ + 2Ag has E° = 0.80 − 0.34 = +0.46 V, which is spontaneous, so copper would dissolve and the vessel would corrode. Copper cannot reduce Zn²⁺, Mg²⁺ or Fe²⁺. - Q8mediumReport
A hydrogen electrode (p(H2) = 1 bar) is placed in a solution of pH 10 at 298 K. What is its reduction potential?
- A0.00 V
- B+0.59 V
- C−0.059 V
- D−0.59 V
Show answer & solution
Correct answer: (D) −0.59 V
For 2H⁺ + 2e⁻ → H2, E = 0 − (0.059/2) log(1/[H⁺]²) = −0.059 pH = −0.059 × 10 = −0.59 V.
Ready to test yourself? Take the 22-question Electrochemistry test →