NEET (Medical) · Chemistry
Chemical Kinetics
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Chemical Kinetics — quick revision notes
- Rate = −(1/a) d[A]/dt = (1/c) d[C]/dt for aA → cC. Units of k are (mol L⁻¹)¹⁻ⁿ s⁻¹: zero order mol L⁻¹ s⁻¹, first order s⁻¹, second order L mol⁻¹ s⁻¹.
- Zero order: [A] = [A]₀ − kt and t½ = [A]₀/2k. First order: k = (2.303/t) log([A]₀/[A]) and t½ = 0.693/k, which is independent of [A]₀.
- General rule: t½ ∝ [A]₀¹⁻ⁿ. For first order, t(75%) = 2 t½, t(87.5%) = 3 t½, t(99.9%) ≈ 10 t½, and t(99%)/t(90%) = 2.
- Gas-phase first order A(g) → B(g) + C(g): P(A) = 2P₀ − P(total), so k = (2.303/t) log[P₀/(2P₀ − Pₜ)].
- Arrhenius: k = A e−Ea/RT. The slope of ln k vs 1/T is −Ea/R, and of log k vs 1/T is −Ea/2.303R. Two temperatures: log(k₂/k₁) = (Ea/2.303R)(T₂ − T₁)/(T₁T₂).
- The temperature coefficient (k at T+10 / k at T) is about 2–3. e−Ea/RT is the fraction of molecules with energy ≥ Ea. ΔH = Ea(forward) − Ea(backward).
- A catalyst lowers Ea through an alternative pathway. It does not change ΔG, ΔH or K. Collision theory (elementary idea): only collisions with energy ≥ Ea and the proper orientation (steric factor P) give products; rate = P Z_AB e−Ea/RT is for understanding only, NEET does not ask calculations on it.
- Molecularity applies only to elementary steps and is 1, 2 or 3 (never 0 or fractional). Order is experimental and can be 0, fractional or negative. The slowest step decides the rate.
Common mistakes to avoid
- Using log instead of ln (or forgetting the 2.303 factor) when Ea is read from k = A e−X/T or from a log k plot.
- Thinking the half-life of a first-order reaction depends on initial concentration (it does not), or confusing which order has t½ ∝ [A]₀.
- Forgetting stoichiometric coefficients when converting the rate of one species to another (for example, d[NO₂]/dt = 2 × (−d[N₂O₅]/dt) for 2N₂O₅ → 4NO₂ + O₂).
- Believing a catalyst shifts equilibrium or changes K, or that concentration changes the rate constant k.
Chemical Kinetics — solved practice questions
8 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
The rate constant of a first-order reaction is 6.93 × 10⁻³ s⁻¹. What is its half-life?
- A10 s
- B100 s
- C69.3 s
- D1000 s
Show answer & solution
Correct answer: (B) 100 s
For a first-order reaction t½ = 0.693/k = 0.693/(6.93 × 10⁻³ s⁻¹) = 100 s. - Q2mediumReport
A first-order reaction is 75% complete in 40 minutes. What is its half-life?
- A10 min
- B20 min
- C30 min
- D40 min
Show answer & solution
Correct answer: (B) 20 min
75% completion means 25% is left, which is (1/2)², so two half-lives have passed. 2 t½ = 40 min, so t½ = 20 min. - Q3mediumReport
For a first-order reaction, the time needed for 99.9% completion is about how many times its half-life?
- A5 times
- B10 times
- C100 times
- D3.32 times
Show answer & solution
Correct answer: (B) 10 times
t(99.9%) = (2.303/k) log(100/0.1) = (2.303 × 3)/k = 6.909/k, and t½ = 0.693/k. The ratio is 6.909/0.693 ≈ 10. - Q4mediumReport
A zero-order reaction has initial reactant concentration [A]₀ = 0.8 mol L⁻¹ and rate constant k = 0.02 mol L⁻¹ s⁻¹. What is its half-life?
- A34.7 s
- B40 s
- C10 s
- D20 s
Show answer & solution
Correct answer: (D) 20 s
For zero order t½ = [A]₀/2k = 0.8/(2 × 0.02) = 20 s. - Q5easyReport
What are the units of the rate constant of a second-order reaction (concentration in mol L⁻¹, time in s)?
- Amol L⁻¹ s⁻¹
- Bs⁻¹
- CL² mol⁻² s⁻¹
- DL mol⁻¹ s⁻¹
Show answer & solution
Correct answer: (D) L mol⁻¹ s⁻¹
The units of k are (mol L⁻¹)¹⁻ⁿ s⁻¹. For n = 2 this gives L mol⁻¹ s⁻¹. - Q6mediumReport
For the rate law Rate = k[A]²[B], [A] is doubled and [B] is halved. The rate becomes:
- Aunchanged
- B2 times
- C4 times
- D8 times
Show answer & solution
Correct answer: (B) 2 times
New rate = k(2[A])²([B]/2) = 4 × 0.5 × k[A]²[B], which is 2 times the original rate. - Q7mediumReport
For the reaction A + B → products, the following initial-rate data were obtained: (i) [A] = 0.1 M, [B] = 0.1 M, rate = 2 × 10⁻³ M s⁻¹; (ii) [A] = 0.2 M, [B] = 0.1 M, rate = 8 × 10⁻³ M s⁻¹; (iii) [A] = 0.1 M, [B] = 0.2 M, rate = 4 × 10⁻³ M s⁻¹. What is the order of the reaction?
- AOverall 3: second order in A, first order in B
- BOverall 4
- COverall 2
- DOverall 3: first order in A, second order in B
Show answer & solution
Correct answer: (A) Overall 3: second order in A, first order in B
Doubling [A] (i→ii) multiplies the rate by 4, so the order in A is 2. Doubling [B] (i→iii) doubles the rate, so the order in B is 1. Overall order = 3. - Q8hardReport
The rate constant of a reaction doubles when the temperature rises from 300 K to 310 K. What is its activation energy, approximately? (R = 8.314 J mol⁻¹ K⁻¹, ln 2 = 0.693)
- A26.8 kJ mol⁻¹
- B5.36 kJ mol⁻¹
- C107.2 kJ mol⁻¹
- D53.6 kJ mol⁻¹
Show answer & solution
Correct answer: (D) 53.6 kJ mol⁻¹
ln(k₂/k₁) = (Ea/R)(T₂ − T₁)/(T₁T₂), so Ea = R ln2 × T₁T₂/ΔT = 8.314 × 0.693 × (300 × 310)/10 ≈ 53,600 J mol⁻¹ ≈ 53.6 kJ mol⁻¹.
Ready to test yourself? Take the 22-question Chemical Kinetics test →