NEET (Medical) · Chemistry

Aldehydes, Ketones and Carboxylic Acids

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
16
medium
6
hard

Aldehydes, Ketones and Carboxylic Acids — quick revision notes

This chapter covers how carbonyl compounds and carboxylic acids are prepared, their physical properties, nucleophilic addition, the named reactions, and acidity. NEET mostly asks for products of named reactions, orders of reactivity or acidity, tests that tell compounds apart, and short reaction-sequence puzzles. Iodoform and Tollens' questions sometimes include a mole calculation.
  • Ways to make aldehydes: Rosenmund (RCOCl + H2, Pd–BaSO4), Stephen (RCN + SnCl2/HCl, then H3O+), DIBAL-H (RCN or ester → RCHO, C=C left alone), Etard (CrO2Cl2/CS2), Gattermann–Koch (CO + HCl, AlCl3/CuCl), and ozonolysis
  • Hydration of alkynes with HgSO4/dil. H2SO4: only ethyne gives an aldehyde (CH3CHO); all other alkynes give ketones
  • Nucleophilic addition reactivity: HCHO > RCHO > RCOR; aromatic aldehydes and ketones are less reactive because of resonance
  • Clemmensen (Zn–Hg/HCl) and Wolff–Kishner (NH2NH2, then KOH/glycol) both convert C=O to CH2
  • Aldol needs an α-H; Cannizzaro needs no α-H (in crossed Cannizzaro HCHO is oxidised to formate); iodoform test is given by CH3CO– and CH3CH(OH)–, with 3I2 used per CH3CO group
  • Tollens' reagent: 1 RCHO gives 2 Ag; aromatic aldehydes give Tollens' but not Fehling's; 2,4-DNP detects all carbonyls
  • Acidity rises with –I/–R groups: CF3COOH > Cl3CCOOH > Cl2CHCOOH > FCH2COOH > ClCH2COOH > HCOOH > CH3COOH; benzoic acid (4.19) is more acidic than acetic acid (4.76); –COOH directs meta and these acids give no Friedel–Crafts reaction
  • Acid reactions: HVZ (needs α-H), soda-lime decarboxylation (one C fewer), Kolbe electrolysis (2RCOO⁻ → R–R + 2CO2 + 2e⁻), RMgX + CO2 (one C more), LiAlH4 or B2H6 reduce –COOH but NaBH4 does not

Common mistakes to avoid

  • Treating benzaldehyde as Fehling's-positive; aromatic aldehydes do not reduce Fehling's solution
  • Forgetting that propyne and all higher alkynes give ketones, not aldehydes, on hydration
  • Using 1:1 Ag stoichiometry; Tollens' reagent gives 2 Ag per aldehyde group
  • Assuming NaBH4 reduces carboxylic acids, or that acids with no α-H undergo the HVZ reaction
Exam tip: For any reaction sequence, write the intermediate at each step and track the carbon count: one C fewer for Hoffmann, decarboxylation and haloform; one C more for Grignard + CO2, or for RX → RCN (KCN) followed by hydrolysis (the hydrolysis step on its own keeps the carbon count). Learn the NCERT pKa table for the substituted acids.

Aldehydes, Ketones and Carboxylic Acids — solved practice questions

8 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    In the Rosenmund reduction, acyl chloride is hydrogenated over palladium on barium sulphate that has been poisoned with sulphur or quinoline. Why is the catalyst poisoned?

    • ATo remove the HCl formed during the reaction
    • BTo turn the acyl chloride into an ester
    • CTo stop the aldehyde from being reduced further to a primary alcohol
    • DTo speed up the reduction of the acyl chloride
    Show answer & solution

    Correct answer: (C) To stop the aldehyde from being reduced further to a primary alcohol

    Poisoning makes the Pd catalyst less active, so the reduction stops at the aldehyde (RCOCl + H2 → RCHO + HCl). The aldehyde is not reduced on to RCH2OH.
  2. Q2easyReport

    Which reagent converts ethanenitrile (CH3CN) into ethanal (CH3CHO)?

    • ANa / C2H5OH
    • BLiAlH4, followed by H2O
    • CH2 / Ni
    • DSnCl2 + HCl, followed by hydrolysis with H3O+
    Show answer & solution

    Correct answer: (D) SnCl2 + HCl, followed by hydrolysis with H3O+

    In the Stephen reaction, SnCl2/HCl reduces the nitrile to an imine (CH3CH=NH), and hydrolysis of the imine gives CH3CHO. LiAlH4, H2/Ni and Na/ethanol all reduce the nitrile fully to the amine CH3CH2NH2.
  3. Q3mediumReport

    CH3–CH=CH–CH2–CH2–CN is treated with DIBAL-H and then with H2O. What is the product?

    • ACH3CH=CHCH2CH2COOH
    • BCH3CH=CHCH2CH2CHO
    • CCH3CH=CHCH2CH2CH2NH2
    • DCH3CH2CH2CH2CH2CHO
    Show answer & solution

    Correct answer: (B) CH3CH=CHCH2CH2CHO

    DIBAL-H (diisobutylaluminium hydride) selectively reduces a nitrile to an imine, which hydrolyses to an aldehyde. It does not touch the C=C double bond, so the product is CH3CH=CHCH2CH2CHO.
  4. Q4easyReport

    In the Etard reaction, toluene is converted into benzaldehyde using:

    • AAcidified KMnO4
    • BH2 over Pd–BaSO4
    • CChromyl chloride (CrO2Cl2) in CS2
    • DCO and HCl with anhydrous AlCl3
    Show answer & solution

    Correct answer: (C) Chromyl chloride (CrO2Cl2) in CS2

    Chromyl chloride oxidises the methyl group to a chromium complex, and hydrolysis of this complex gives benzaldehyde. CO/HCl with AlCl3 is the Gattermann–Koch reaction, and KMnO4 oxidises toluene all the way to benzoic acid.
  5. Q5mediumReport

    Which alkyne gives an aldehyde when hydrated with dilute H2SO4 and HgSO4?

    • APropyne
    • BEthyne
    • CBut-1-yne
    • DBut-2-yne
    Show answer & solution

    Correct answer: (B) Ethyne

    Hydration follows Markovnikov's rule through an enol. Ethyne (HC≡CH) gives CH3CHO, but every other alkyne gives a ketone; for example, propyne gives acetone.
  6. Q6mediumReport

    An alkene C6H12 undergoes ozonolysis followed by Zn/H2O, and the only product is propan-2-one. What is the alkene?

    • A2-Methylpent-2-ene
    • B3,3-Dimethylbut-1-ene
    • CHex-3-ene
    • D2,3-Dimethylbut-2-ene
    Show answer & solution

    Correct answer: (D) 2,3-Dimethylbut-2-ene

    (CH3)2C=C(CH3)2 is symmetrical, so cleaving the double bond gives 2 molecules of (CH3)2C=O. Hex-3-ene gives propanal, 2-methylpent-2-ene gives acetone + propanal, and 3,3-dimethylbut-1-ene gives (CH3)3CCHO + HCHO.
  7. Q7easyReport

    What is the correct decreasing order of reactivity towards nucleophilic addition?

    • ACH3CHO > HCHO > CH3COCH3
    • BHCHO > CH3COCH3 > CH3CHO
    • CCH3COCH3 > CH3CHO > HCHO
    • DHCHO > CH3CHO > CH3COCH3
    Show answer & solution

    Correct answer: (D) HCHO > CH3CHO > CH3COCH3

    Each alkyl group adds steric hindrance and pushes electrons (+I effect) onto the carbonyl carbon, making it less electrophilic. Methanal has no alkyl group, so it is the most reactive, and propan-2-one has two, so it is the least reactive.
  8. Q8mediumReport

    Assertion (A): Benzaldehyde is less reactive than propanal towards nucleophilic addition. Reason (R): Through resonance, the benzene ring reduces the electrophilicity of the carbonyl carbon in benzaldehyde.

    • ABoth A and R are true and R is the correct explanation of A
    • BBoth A and R are true but R is not the correct explanation of A
    • CA is false but R is true
    • DA is true but R is false
    Show answer & solution

    Correct answer: (A) Both A and R are true and R is the correct explanation of A

    Conjugation with the phenyl ring spreads the positive charge on the carbonyl carbon over the ring. The carbonyl carbon is therefore less electrophilic than in propanal, and benzaldehyde reacts more slowly.

Ready to test yourself? Take the 22-question Aldehydes, Ketones and Carboxylic Acids test →