NEET (Medical) · Chemistry
Amines
27 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Amines — quick revision notes
- Preparation: Fe/HCl reduction of ArNO2 (only a little HCl needed), ammonolysis of RX (excess NH3 favours 1°), RCN or RCONH2 + LiAlH4 (same carbon count), Gabriel synthesis (1° aliphatic only), Hoffmann bromamide RCONH2 + Br2 + 4NaOH → RNH2 (one C fewer)
- Boiling points of isomeric amines: 1° > 2° > 3°, because the number of N–H bonds available for H-bonding falls
- Basicity in water: (CH3)2NH > CH3NH2 > (CH3)3N > NH3, but (C2H5)2NH > (C2H5)3N > C2H5NH2 > NH3; in the gas phase it is 3° > 2° > 1° > NH3
- pKb values: aniline 9.38, NH3 4.75, benzylamine 4.70, CH3NH2 3.38; electron-donating groups (–CH3, –OCH3) increase and electron-withdrawing groups (–NO2) decrease the basicity of aryl amines
- Carbylamine test (CHCl3 + alc. KOH, isocyanide smell) is given by 1° amines only; Hinsberg: 1° product dissolves in KOH, 2° product is insoluble, 3° amines do not react
- Aniline + Br2 water gives 2,4,6-tribromoaniline; acetylate first to get a mono-substituted product; nitration gives about 51% p, 47% m, 2% o because of the anilinium ion; sulphonation gives sulphanilic acid (a zwitterion); no Friedel–Crafts reaction (forms a salt with AlCl3)
- ArNH2 + NaNO2/HCl at 273–278 K gives ArN2+Cl−; aliphatic 1° amines give an alcohol + N2 instead
- Diazonium reactions: CuCl/HCl, CuBr/HBr, CuCN/KCN (Sandmeyer); Cu/HX (Gattermann); KI → ArI; HBF4 then heat → ArF; H3PO2 → ArH; warm H2O → phenol; coupling with phenol gives orange p-hydroxyazobenzene and with aniline gives yellow p-aminoazobenzene
Common mistakes to avoid
- Using the gas-phase order (3° most basic) for questions about aqueous solution
- Treating benzylamine as an aromatic amine; its lone pair is not delocalised, so it is about as basic as an aliphatic amine
- Believing tertiary amines react with Hinsberg's reagent, or that secondary amines give the carbylamine test
- Forgetting that Hoffmann degradation loses one carbon while LiAlH4 reduction of an amide keeps the same number
Amines — solved practice questions
7 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
Which of the following is a secondary amine?
- A(CH3)3N
- BCH3CH2NH2
- C(CH3)2CHNH2
- DCH3NHCH2CH3
Show answer & solution
Correct answer: (D) CH3NHCH2CH3
In CH3NHCH2CH3 (N-methylethanamine), the nitrogen carries two alkyl groups and one H, so it is a secondary amine. (CH3)2CHNH2 is primary because only one carbon group is on nitrogen. - Q2hardReport
How many structurally isomeric amines have the molecular formula C4H11N?
- A7
- B8
- C4
- D6
Show answer & solution
Correct answer: (B) 8
There are 4 primary amines (butan-1-amine, butan-2-amine, 2-methylpropan-1-amine and 2-methylpropan-2-amine), 3 secondary amines (N-methylpropan-1-amine, N-methylpropan-2-amine and N-ethylethanamine) and 1 tertiary amine (N,N-dimethylethanamine). That makes 8 in total. - Q3mediumReport
Why can aniline NOT be prepared by Gabriel phthalimide synthesis?
- AKOH converts aryl halides into phenols
- BAryl halides do not undergo nucleophilic substitution with the anion formed by phthalimide
- CPhthalimide is not acidic enough to form a salt with KOH
- DAniline is too basic to be released on hydrolysis
Show answer & solution
Correct answer: (B) Aryl halides do not undergo nucleophilic substitution with the anion formed by phthalimide
Gabriel synthesis needs the phthalimide anion to make an SN2 attack on the carbon carrying the halogen. Aryl halides do not undergo this substitution, so the method gives only primary aliphatic amines. - Q4mediumReport
5.9 g of ethanamide undergoes complete Hoffmann bromamide degradation (Br2 / NaOH). What mass of amine is formed? (C = 12, H = 1, N = 14, O = 16)
- A4.5 g
- B1.55 g
- C3.1 g
- D6.2 g
Show answer & solution
Correct answer: (C) 3.1 g
CH3CONH2 (M = 59) → CH3NH2 (M = 31) in a 1:1 ratio, losing one carbon. Moles = 5.9/59 = 0.1, so the mass is 0.1 × 31 = 3.1 g. Check: 59 g gives 31 g, so 5.9 g gives 3.1 g. - Q5easyReport
What is formed when benzamide undergoes Hoffmann bromamide degradation?
- ABenzoic acid
- BAniline
- CBenzonitrile
- DBenzylamine
Show answer & solution
Correct answer: (B) Aniline
Br2/NaOH converts RCONH2 into RNH2 with one carbon fewer, the carbonyl carbon being lost as CO32−. So C6H5CONH2 gives C6H5NH2. - Q6easyReport
When an alkyl halide undergoes ammonolysis, under what condition is the primary amine the major product?
- AAnhydrous AlCl3 is added as catalyst
- BA large excess of ammonia is used
- CA large excess of the alkyl halide is used
- DThe reaction is carried out without any solvent
Show answer & solution
Correct answer: (B) A large excess of ammonia is used
The primary amine is itself a nucleophile and can react further to give 2° and 3° amines and quaternary salts. A large excess of NH3 makes it far more likely that the alkyl halide reacts with ammonia. - Q7mediumReport
Why is reducing nitrobenzene with iron scrap and HCl preferred to using tin and HCl?
- AIron reduces nitrobenzene without needing any acid
- BIron is a much stronger reducing agent than tin
- CWith iron the reaction stops selectively at N-phenylhydroxylamine
- DThe FeCl2 formed is hydrolysed and releases HCl, so only a small amount of acid is needed
Show answer & solution
Correct answer: (D) The FeCl2 formed is hydrolysed and releases HCl, so only a small amount of acid is needed
FeCl2 is hydrolysed during the reaction and regenerates HCl. As a result, only a small amount of HCl is needed to reduce nitrobenzene to aniline, as NCERT notes.
Ready to test yourself? Take the 20-question Amines test →