NEET (Medical) · Chemistry

Alcohols, Phenols and Ethers

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
16
medium
6
hard

Alcohols, Phenols and Ethers — quick revision notes

This chapter covers the structure, preparation, physical properties and reactions of alcohols, phenols and ethers. Topics include acidity, Lucas test, dehydration, oxidation, electrophilic substitution of phenol, Kolbe's and Reimer–Tiemann reactions, Williamson synthesis and HI cleavage of ethers. NEET favours acidity orders, product prediction of named reactions, reagent/condition matching and mechanism-based traps in ether cleavage.
  • pKa: picric acid (about 0.5) < p-nitrophenol (7.1) < phenol (10.0) < p-cresol (10.2) < ethanol (15.9). Electron-withdrawing groups at ortho/para raise phenol acidity; electron-donating groups lower it. Alcohol acidity: 1° > 2° > 3°
  • Bond angles: C–O–H in methanol is 108.9°; C–O–C in methoxymethane is 111.7°. The C–O bond is 136 pm in phenol and 142 pm in methanol
  • Hydration of an alkene with H⁺/H2O gives the Markovnikov alcohol. Hydroboration–oxidation (B2H6 then H2O2/OH⁻) gives the anti-Markovnikov alcohol. Grignard reagents give 1° alcohols with HCHO, 2° alcohols with RCHO and 3° alcohols with ketones
  • Phenol sources: chlorobenzene (NaOH, 623 K, 300 atm), benzenesulphonic acid (NaOH fusion), diazonium salt (warm water) and cumene (via hydroperoxide; phenol + acetone)
  • Lucas test (conc. HCl + anhydrous ZnCl2): 3° gives turbidity immediately, 2° in about 5 min, 1° not at room temperature. Dehydration: ethanol with conc. H2SO4 at 443 K; 2° with 85% H3PO4 at 440 K; 3° with 20% H3PO4 at 358 K. Ether forms at 413 K
  • Oxidation: PCC converts 1° alcohols to aldehydes. Heated Cu at 573 K converts 1° to aldehyde and 2° to ketone, but 3° gives an alkene. Phenol with Zn dust gives benzene; phenol with chromic acid gives benzoquinone
  • Phenol reactions: bromine water gives 2,4,6-tribromophenol; Br2 in CS2 at low temperature gives monobromo; dilute HNO3 gives o + p nitrophenol (o is steam volatile); conc. HNO3 gives picric acid; Kolbe's reaction (CO2) gives salicylic acid; Reimer–Tiemann (CHCl3/NaOH) gives salicylaldehyde
  • Williamson synthesis needs a 1° alkyl halide plus an alkoxide; a 3° halide gives an alkene instead. HI cleavage: a 3° alkyl group leaves as R–I (SN1), as in MTBE giving (CH3)3CI + CH3OH; anisole gives phenol + CH3I, never iodobenzene

Common mistakes to avoid

  • Writing iodobenzene as a product of anisole + HI. The aryl–O bond never breaks.
  • Using a tertiary alkyl halide in Williamson synthesis. It gives an alkene, not an ether.
  • Mixing up the reagents: concentrated HNO3 gives picric acid, while dilute HNO3 gives mono-nitrophenols. Likewise, bromine water gives tribromophenol, while Br2 in CS2 gives monobromophenol.
  • Mixing up the two named reactions: Kolbe's reaction (CO2) gives an acid, while Reimer–Tiemann (CHCl3/NaOH) gives an aldehyde.
Exam tip: Memorise the reagent and temperature for each named reaction as a pair, because NEET match-the-column questions are built on these pairs. For ether cleavage, always ask which side forms the more stable carbocation (SN1) or which side is less hindered (SN2).

Alcohols, Phenols and Ethers — solved practice questions

8 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    In the Lucas test, which alcohol produces turbidity immediately at room temperature?

    • AButan-1-ol
    • B2-Methylpropan-1-ol
    • C2-Methylpropan-2-ol
    • DButan-2-ol
    Show answer & solution

    Correct answer: (C) 2-Methylpropan-2-ol

    The Lucas reagent is concentrated HCl with anhydrous ZnCl2. Tertiary alcohols form a stable carbocation, so the insoluble alkyl chloride separates at once. Secondary alcohols take about 5 minutes, and primary alcohols give no turbidity at room temperature.
  2. Q2easyReport

    Why is phenol more acidic than ethanol?

    • AThe negative charge of the phenoxide ion is delocalised over the benzene ring
    • BPhenol forms stronger hydrogen bonds with water
    • CThe ethoxide ion is stabilised by resonance
    • DPhenol contains more hydrogen atoms
    Show answer & solution

    Correct answer: (A) The negative charge of the phenoxide ion is delocalised over the benzene ring

    Resonance stabilises the phenoxide ion far more than phenol itself, while the ethoxide ion has no resonance stabilisation. The pKa of phenol is 10.0, compared with 15.9 for ethanol.
  3. Q3mediumReport

    Which option gives the correct order of decreasing acidity?

    • Ap-Nitrophenol > phenol > p-cresol > ethanol
    • Bp-Cresol > phenol > p-nitrophenol > ethanol
    • CEthanol > p-cresol > phenol > p-nitrophenol
    • DPhenol > p-nitrophenol > ethanol > p-cresol
    Show answer & solution

    Correct answer: (A) p-Nitrophenol > phenol > p-cresol > ethanol

    The –NO2 group withdraws electrons and stabilises phenoxide, while –CH3 donates electrons and destabilises it. The pKa values are 7.1 (p-nitrophenol), 10.0 (phenol), 10.2 (p-cresol) and 15.9 (ethanol).
  4. Q4mediumReport

    Which of the following has the lowest pKa?

    • A4-Nitrophenol
    • B2,4,6-Trinitrophenol
    • CPhenol
    • D2-Methylphenol
    Show answer & solution

    Correct answer: (B) 2,4,6-Trinitrophenol

    Picric acid has three electron-withdrawing –NO2 groups at the ortho and para positions, which strongly stabilise its phenoxide ion. Its pKa is about 0.5.
  5. Q5mediumReport

    Propene is treated with B2H6 and then with H2O2 in aqueous NaOH. What is the product?

    • APropanal
    • BPropane-1,2-diol
    • CPropan-1-ol
    • DPropan-2-ol
    Show answer & solution

    Correct answer: (C) Propan-1-ol

    In hydroboration–oxidation, boron adds to the less substituted carbon. Oxidation then replaces boron with –OH, giving the anti-Markovnikov alcohol CH3CH2CH2OH.
  6. Q6easyReport

    What is the major product of the acid-catalysed hydration of propene?

    • APropanal
    • BPropan-2-ol
    • CPropene oxide
    • DPropan-1-ol
    Show answer & solution

    Correct answer: (B) Propan-2-ol

    Protonation gives the more stable secondary carbocation (Markovnikov's rule), and water then attacks it to give CH3CH(OH)CH3.
  7. Q7mediumReport

    In the cumene process, cumene hydroperoxide is hydrolysed with dilute acid. What are the products?

    • ABenzoic acid and methanol
    • BPhenol and propanal
    • CBenzene and propan-2-ol
    • DPhenol and propanone
    Show answer & solution

    Correct answer: (D) Phenol and propanone

    Air oxidises cumene (isopropylbenzene) to cumene hydroperoxide, and dilute acid then cleaves it into phenol and acetone.
  8. Q8mediumReport

    Sodium phenoxide is heated with CO2 under pressure (about 4–7 atm, 400 K), and the product is then acidified. What is obtained?

    • ABenzoic acid
    • BSalicylaldehyde
    • CSalicylic acid
    • DPhenyl acetate
    Show answer & solution

    Correct answer: (C) Salicylic acid

    In Kolbe's reaction, the strongly activated phenoxide ion undergoes electrophilic attack by the weak electrophile CO2, mainly at the ortho position. Acidification gives 2-hydroxybenzoic acid.

Ready to test yourself? Take the 22-question Alcohols, Phenols and Ethers test →