কষে দেখি ১৭: সম্পাদ্য: বৃত্তের স্পর্শক অঙ্কন

Ganit Prakash Class 10, chapter 17: Construction: Drawing Tangents to a Circle

This chapter teaches how to draw, with ruler and compass, the tangent at a point on a circle and the two tangents to a circle from a point outside it. In Madhyamik the construction question (usually 5 marks) almost always offers tangent construction as one option; the steps need not be written, but all construction arcs must be left visible.এই অধ্যায়ে স্কেল ও পেনসিল-কম্পাসের সাহায্যে বৃত্তের উপরিস্থ কোনো বিন্দুতে স্পর্শক এবং বৃত্তের বহিঃস্থ কোনো বিন্দু থেকে বৃত্তের দুটি স্পর্শক অঙ্কন করা শেখানো হয়েছে। মাধ্যমিকে সম্পাদ্য অংশে একটি অঙ্কনের প্রশ্ন (সাধারণত 5 নম্বর) আসে, যেখানে স্পর্শক অঙ্কন একটি বিকল্প হিসেবে প্রায় প্রতি বছর থাকে; অঙ্কন প্রণালী লিখতে হয় না, কিন্তু অঙ্কনচিহ্ন রেখে যেতে হয়।

The worked examples below are our own problems of the same kind as the book’s, with different numbers. Keep your Ganit Prakash open and solve its problems the same way.

কষে দেখি ১৭ (Koshe Dekhi 17 · 11 problems)

Drawing the tangent at a point on a circle (by drawing the perpendicular to the radius at its end) — e.g. tangents at the ends of a chord or a diameter, showing that tangents at the ends of a diameter are parallel, that tangents at the ends of two perpendicular diameters form a square, and tangents at the vertices of a triangle's circumcircle. Drawing two tangents from an external point (circle on the line joining the centre and the point as diameter, using 'angle in a semicircle is a right angle'), measuring tangent length with a scale (it can also be verified with Pythagoras' theorem); also identifying a common tangent and measuring the angle between two tangents with a protractor.বৃত্তের উপরিস্থ বিন্দুতে স্পর্শক অঙ্কন (ব্যাসার্ধের প্রান্তবিন্দুতে লম্ব অঙ্কন করে) — যেমন জ্যা বা ব্যাসের প্রান্তবিন্দুতে স্পর্শক, ব্যাসের দুই প্রান্তের স্পর্শক সমান্তরাল হয়, পরস্পর লম্ব দুটি ব্যাসের প্রান্তে স্পর্শক আঁকলে বর্গক্ষেত্র তৈরি হয়, ত্রিভুজের পরিবৃত্তের শীর্ষবিন্দুতে স্পর্শক। বহিঃস্থ বিন্দু থেকে দুটি স্পর্শক অঙ্কন (কেন্দ্র ও বহিঃস্থ বিন্দু সংযোগকারী সরলরেখাংশের মধ্যবিন্দুকে কেন্দ্র করে বৃত্ত এঁকে, অর্ধবৃত্তস্থ কোণ সমকোণ — এই উপপাদ্য প্রয়োগ করে) এবং স্কেল দিয়ে স্পর্শকের দৈর্ঘ্য মাপা (পিথাগোরাসের উপপাদ্য দিয়েও যাচাই করা যায়); সাধারণ স্পর্শক ও স্পর্শকদ্বয়ের মধ্যবর্তী কোণ মাপাও আছে।
Tip: Make a rough sketch first, and when the centre-to-point distance d and radius r are known, calculate the tangent length √(d2 − r2) beforehand so you can check your scale measurement against it. Never erase the construction arcs; marks are given for them.পরামর্শ: অঙ্কনের আগে খাতায় একটি খসড়া চিত্র এঁকে নাও এবং কেন্দ্র থেকে বহিঃস্থ বিন্দুর দূরত্ব ও ব্যাসার্ধ জানা থাকলে স্পর্শকের দৈর্ঘ্য √(d^2 − r^2) সূত্রে আগেই হিসাব করে রাখো — স্কেলে মাপা মান এর সাথে মিলিয়ে নিলে ভুল ধরা পড়ে। অঙ্কনচিহ্ন (আর্ক) মুছবে না, ওগুলোতেই নম্বর থাকে।
  1. Worked example 1 · উদাহরণ ১
    Draw a circle with centre C and radius 3.5 cm. Take any point M on the circle and draw the tangent to the circle at M.3.5 সেমি. দৈর্ঘ্যের ব্যাসার্ধবিশিষ্ট একটি বৃত্ত অঙ্কন করো যার কেন্দ্র C। বৃত্তের উপর যে-কোনো একটি বিন্দু M নিয়ে M বিন্দুতে বৃত্তের স্পর্শক অঙ্কন করো।
    Try it first, then see the solution · সমাধান দেখো
    1. Construction (1): With C as centre and radius 3.5 cm, draw a circle and take any point M on it.অঙ্কন (1): C বিন্দুকে কেন্দ্র করে 3.5 সেমি. ব্যাসার্ধ নিয়ে একটি বৃত্ত আঁকলাম এবং বৃত্তের উপর যে-কোনো একটি বিন্দু M নিলাম।
    2. Construction (2): Join C and M and extend CM beyond M to a ray CZ.অঙ্কন (2): C, M যোগ করে CM-কে M বিন্দুর পরে CZ রশ্মি পর্যন্ত বর্ধিত করলাম।
    3. Construction (3): With M as centre and any radius, draw an arc cutting MC at D and MZ at E (so MD = ME).অঙ্কন (3): M বিন্দুকে কেন্দ্র করে যে-কোনো ব্যাসার্ধ নিয়ে একটি বৃত্তচাপ আঁকলাম যা MC-কে D বিন্দুতে এবং MZ-কে E বিন্দুতে ছেদ করল (MD = ME)।
    4. Construction (4): With D and E as centres and an equal radius greater than DM, draw two arcs on the same side of CZ meeting at F.অঙ্কন (4): D ও E বিন্দুকে কেন্দ্র করে DM অপেক্ষা বেশি সমান ব্যাসার্ধ নিয়ে CZ-এর একই পাশে দুটি বৃত্তচাপ আঁকলাম যারা পরস্পরকে F বিন্দুতে ছেদ করল।
    5. Construction (5): Join M and F and extend both ways; this is the required tangent.অঙ্কন (5): M, F যোগ করে উভয় দিকে বর্ধিত করলাম; এটাই নির্ণেয় স্পর্শক।
    6. Proof (1): DF = EF and DM = ME, so F and M both lie on the perpendicular bisector of DE; hence FM ⊥ DE, i.e. FM ⊥ CM.প্রমাণ (1): DF = EF এবং DM = ME, তাই F ও M দুটিই DE-এর লম্বসমদ্বিখণ্ডকের উপর অবস্থিত, অর্থাৎ FM ⊥ DE, অর্থাৎ FM ⊥ CM।
    7. Proof (2): A line perpendicular to a radius at its outer end is a tangent, so MF is the tangent to the circle at M.প্রমাণ (2): বৃত্তের ব্যাসার্ধের বহিঃপ্রান্তে অঙ্কিত লম্ব বৃত্তের স্পর্শক, তাই MF হলো M বিন্দুতে বৃত্তের স্পর্শক।
    Answer: Line MF is the tangent to the circle with centre C at the point M (MF ⊥ CM).উত্তর: MF সরলরেখাটি C কেন্দ্রীয় বৃত্তের M বিন্দুতে অঙ্কিত স্পর্শক (MF ⊥ CM)।
  2. Worked example 2 · উদাহরণ ২
    Draw a circle with centre O and radius 3 cm. Take a point K 5 cm from the centre, draw the two tangents from K to the circle and find the length of a tangent.3 সেমি. দৈর্ঘ্যের ব্যাসার্ধবিশিষ্ট একটি বৃত্ত আঁকো যার কেন্দ্র O। কেন্দ্র থেকে 5 সেমি. দূরে একটি বিন্দু K নিয়ে K থেকে বৃত্তের দুটি স্পর্শক অঙ্কন করো এবং স্পর্শকের দৈর্ঘ্য নির্ণয় করো।
    Try it first, then see the solution · সমাধান দেখো
    1. Construction (1): With O as centre draw a circle of radius 3 cm, and cut OK = 5 cm from a ray OY.অঙ্কন (1): O বিন্দুকে কেন্দ্র করে 3 সেমি. ব্যাসার্ধের বৃত্ত আঁকলাম এবং OY রশ্মি থেকে OK = 5 সেমি. কেটে নিলাম।
    2. Construction (2): Draw the perpendicular bisector of OK to get its midpoint N (ON = NK = 2.5 cm).অঙ্কন (2): OK সরলরেখাংশের লম্বসমদ্বিখণ্ডক এঁকে মধ্যবিন্দু N পেলাম (ON = NK = 2.5 সেমি.)।
    3. Construction (3): With N as centre and radius NO, draw a circle cutting the circle with centre O at S and T.অঙ্কন (3): N বিন্দুকে কেন্দ্র করে NO দৈর্ঘ্যের ব্যাসার্ধ নিয়ে একটি বৃত্ত আঁকলাম যা O কেন্দ্রীয় বৃত্তকে S ও T বিন্দুতে ছেদ করল।
    4. Construction (4): Join K to S and K to T and extend; KS and KT are the two required tangents.অঙ্কন (4): K, S এবং K, T যোগ করে বর্ধিত করলাম; KS ও KT হলো নির্ণেয় দুটি স্পর্শক।
    5. Proof: Join O and S; ∠OSK is an angle in a semicircle, so ∠OSK = 90°, i.e. KS ⊥ radius OS, so KS is a tangent; similarly KT is a tangent.প্রমাণ: O, S যোগ করলাম; ∠OSK অর্ধবৃত্তস্থ কোণ, তাই ∠OSK = 90°, অর্থাৎ KS ⊥ ব্যাসার্ধ OS, সুতরাং KS স্পর্শক; অনুরূপে KT স্পর্শক।
    6. Length: In right triangle OSK, by Pythagoras' theorem KS2 = OK2 − OS2 = 52 − 32 = 25 − 9 = 16.দৈর্ঘ্য: সমকোণী ΔOSK-এ পিথাগোরাসের উপপাদ্য অনুযায়ী KS^2 = OK^2 − OS^2 = 5^2 − 3^2 = 25 − 9 = 16।
    7. ∴ KS = √16 = 4 cm; measuring with a scale also gives KS = KT = 4 cm.∴ KS = √16 = 4 সেমি.; স্কেল দিয়ে মাপলেও KS = KT = 4 সেমি. পাওয়া যায়।
    Answer: The two tangents KS and KT from K are drawn; each tangent is 4 cm long.উত্তর: K বিন্দু থেকে দুটি স্পর্শক KS ও KT অঙ্কিত হলো; প্রতিটি স্পর্শকের দৈর্ঘ্য 4 সেমি.।
  3. Worked example 3 · উদাহরণ ৩
    In a circle with centre P and radius 3 cm, draw a chord GH of length 4.8 cm. Draw the tangents at G and H; if they meet at R, calculate the length RG and check it with a scale.P কেন্দ্রীয় 3 সেমি. ব্যাসার্ধের একটি বৃত্তে 4.8 সেমি. দৈর্ঘ্যের একটি জ্যা GH আঁকো। G ও H বিন্দুতে বৃত্তের স্পর্শক অঙ্কন করো, তারা R বিন্দুতে মিলিত হলে RG-এর দৈর্ঘ্য হিসাব করে বের করো এবং স্কেলে মেপে মিলিয়ে নাও।
    Try it first, then see the solution · সমাধান দেখো
    1. Construction (1): With P as centre draw a circle of radius 3 cm; take G on it, and with G as centre and radius 4.8 cm cut the circle at H; join G and H.অঙ্কন (1): P কেন্দ্র করে 3 সেমি. ব্যাসার্ধের বৃত্ত আঁকলাম; বৃত্তের উপর G বিন্দু নিয়ে G-কে কেন্দ্র করে 4.8 সেমি. ব্যাসার্ধের চাপ দিয়ে বৃত্তে H বিন্দু পেলাম; G, H যোগ করলাম।
    2. Construction (2): Join P and G, extend it, and draw the perpendicular to PG at G; this is the tangent at G.অঙ্কন (2): P, G যোগ করে বর্ধিত করলাম এবং G বিন্দুতে PG-এর উপর লম্ব আঁকলাম; এটি G বিন্দুতে স্পর্শক।
    3. Construction (3): Similarly join P and H and draw the perpendicular to PH at H; this is the tangent at H. The two tangents meet at R.অঙ্কন (3): একইভাবে P, H যোগ করে H বিন্দুতে PH-এর উপর লম্ব আঁকলাম; এটি H বিন্দুতে স্পর্শক। স্পর্শক দুটি R বিন্দুতে মিলিত হলো।
    4. Calculation (1): PR bisects GH perpendicularly at M, so GM = 4.8 ÷ 2 = 2.4 cm and PM = √(32 − 2.42) = √(9 − 5.76) = √3.24 = 1.8 cm.হিসাব (1): PR, GH-কে M বিন্দুতে লম্বভাবে সমদ্বিখণ্ডিত করে, তাই GM = 4.8 ÷ 2 = 2.4 সেমি. এবং PM = √(3^2 − 2.4^2) = √(9 − 5.76) = √3.24 = 1.8 সেমি.।
    5. Calculation (2): In right triangle PGR (∠PGR = 90°), GM is perpendicular to the hypotenuse, so PG2 = PM × PR ⇒ 9 = 1.8 × PR ⇒ PR = 5 cm.হিসাব (2): সমকোণী ΔPGR-এ (∠PGR = 90°) GM অতিভুজের উপর লম্ব, তাই PG^2 = PM × PR ⇒ 9 = 1.8 × PR ⇒ PR = 5 সেমি.।
    6. Calculation (3): RG2 = PR2 − PG2 = 25 − 9 = 16 ⇒ RG = 4 cm; measuring with a scale gives RG = RH = 4 cm.হিসাব (3): RG^2 = PR^2 − PG^2 = 25 − 9 = 16 ⇒ RG = 4 সেমি.; স্কেলে মাপলে RG = RH = 4 সেমি. পাওয়া যায়।
    Answer: The tangents at G and H meet at R, and RG = RH = 4 cm.উত্তর: G ও H বিন্দুর স্পর্শক দুটি R বিন্দুতে মিলিত হয় এবং RG = RH = 4 সেমি.।

Practise this chapter as MCQs and short questions: Construction: Drawing Tangents to a Circle practice test →