HS 2027 Semester IV (WBCHSE) · Important questions

Chemistry important questions

উচ্চমাধ্যমিক ২০২৭ · সেমিস্টার ৪ · রসায়ন · গুরুত্বপূর্ণ প্রশ্ন

This is not a guess at the 2027 paper, and nobody can promise which questions will come. It starts from what is certain: the official WBCHSE question pattern says how many questions, and of which kind, each unit gets. The table shows where the marks are. Under it, each unit lists the short and long questions to practise, of the kinds the Board sets from it, with the points an examiner looks for.

Show first:

Where the marks are

Most marks come from Chemical Kinetics (14), Organic Compounds containing Nitrogen (14) and d- and f-Block Elements (12). Revise those first.

  • 10Marks setমোট নম্বর
    Electrochemistry
    Shortসংক্ষিপ্ত
    2 × 2, 2 × 3
    Longরচনাধর্মী
    —
  • 14Marks setমোট নম্বর
    Chemical Kinetics
    Shortসংক্ষিপ্ত
    2 × 2
    Longরচনাধর্মী
    2 × 5
  • 10Marks setমোট নম্বর
    Coordination Compounds
    Shortসংক্ষিপ্ত
    2 × 2, 2 × 3
    Longরচনাধর্মী
    —
  • 14Marks setমোট নম্বর
    Organic Compounds containing Nitrogen
    Shortসংক্ষিপ্ত
    4 × 2, 2 × 3
    Longরচনাধর্মী
    —
  • 12Marks setমোট নম্বর
    d- and f-Block Elements
    Shortসংক্ষিপ্ত
    4 × 3
    Longরচনাধর্মী
    —
  • 10Marks setমোট নম্বর
    Aldehydes, Ketones and Carboxylic Acids
    Shortসংক্ষিপ্ত
    —
    Longরচনাধর্মী
    2 × 5

From the WBCHSE question pattern for Class XII Semester IV. Some groups let you choose (“answer any …”), so the marks set add up to more than the 35 or 40 you write.

Electrochemistry (তড়িৎ-রসায়ন)

10 marks set
  1. 1.
    A current of 2 A is passed for 965 s through a solution of CuSO₄. Calculate the mass of copper deposited at the cathode. (Cu = 63.5 g mol⁻¹, 1 F = 96500 C mol⁻¹)CuSO₄ দ্রবণের মধ্য দিয়ে 965 s ধরে 2 A তড়িৎপ্রবাহ পাঠানো হলো। ক্যাথোডে কত ভর কপার জমা হবে নির্ণয় করো। (Cu = 63.5 g mol⁻¹, 1 F = 96500 C mol⁻¹)

    [3 marks]

    Points the examiner looks for
    • Q = It = 1930 C (1)Q = It = 1930 C (1)
    • Cu²⁺ + 2e⁻ → Cu, 2 F deposit 63.5 g (1)Cu²⁺ + 2e⁻ → Cu, 2 F-এ 63.5 g জমা হয় (1)
    • Mass = 0.635 g (1)ভর = 0.635 g (1)
    Write it, then compare with the full model answer →
  2. 2.
    Calculate the emf of the cell Zn | Zn²⁺ (0.001 M) || Cu²⁺ (0.1 M) | Cu at 298 K. (E°cell = 1.10 V)298 K উষ্ণতায় Zn | Zn²⁺ (0.001 M) || Cu²⁺ (0.1 M) | Cu কোষটির তড়িচ্চালক বল নির্ণয় করো। (E°cell = 1.10 V)

    [3 marks]

    Points the examiner looks for
    • Cell reaction with n = 2 (1)n = 2 সহ কোষ বিক্রিয়া (1)
    • Correct Nernst expression with Q = [Zn²⁺]/[Cu²⁺] (1)Q = [Zn²⁺]/[Cu²⁺] সহ সঠিক নার্নস্ট রাশিমালা (1)
    • Ecell = 1.159 V (1)Ecell = 1.159 V (1)
    Write it, then compare with the full model answer →
  3. 3.
    The limiting molar conductivities (Λ°m) of HCl, CH₃COONa and NaCl are 426.2, 91.0 and 126.5 S cm² mol⁻¹ respectively. Calculate Λ°m of acetic acid. If the molar conductivity of a given acetic acid solution is 39.07 S cm² mol⁻¹, find its degree of dissociation.HCl, CH₃COONa ও NaCl-এর সীমান্ত মোলার পরিবাহিতা (Λ°m) যথাক্রমে 426.2, 91.0 ও 126.5 S cm² mol⁻¹। অ্যাসিটিক অ্যাসিডের Λ°m নির্ণয় করো। একটি অ্যাসিটিক অ্যাসিড দ্রবণের মোলার পরিবাহিতা 39.07 S cm² mol⁻¹ হলে তার বিয়োজন মাত্রা (degree of dissociation) নির্ণয় করো।

    [3 marks]

    Points the examiner looks for
    • Correct Kohlrausch combination (1)কোলরাউশ সূত্রের সঠিক সমন্বয় (1)
    • Λ°(CH₃COOH) = 390.7 S cm² mol⁻¹ (1)Λ°(CH₃COOH) = 390.7 S cm² mol⁻¹ (1)
    • α = Λm/Λ°m = 0.1 (1)α = Λm/Λ°m = 0.1 (1)
    Write it, then compare with the full model answer →
  4. 4.
    Write the reactions at the anode and the cathode of a H₂–O₂ fuel cell and the overall reaction. Mention one advantage of a fuel cell over an ordinary cell.H₂–O₂ জ্বালানি কোষের (fuel cell) অ্যানোড ও ক্যাথোডের বিক্রিয়া এবং সামগ্রিক বিক্রিয়া লেখো। সাধারণ কোষের তুলনায় জ্বালানি কোষের একটি সুবিধা উল্লেখ করো।

    [3 marks]

    Points the examiner looks for
    • Correct anode reaction (1)সঠিক অ্যানোড বিক্রিয়া (1)
    • Correct cathode and overall reaction (1)সঠিক ক্যাথোড ও সামগ্রিক বিক্রিয়া (1)
    • One valid advantage (1)একটি যথার্থ সুবিধা (1)
    Write it, then compare with the full model answer →

Chemical Kinetics (রাসায়নিক গতিবিদ্যা)

14 marks set
  1. 1.
    (a) Derive the integrated rate equation for a first-order reaction R → P. (3) (b) Show that the half-life of a first-order reaction is independent of the initial concentration. (2)(a) R → P প্রথম ক্রম বিক্রিয়ার সমাকলিত হার সমীকরণ (integrated rate equation) প্রতিষ্ঠা করো। (3) (b) দেখাও যে প্রথম ক্রম বিক্রিয়ার অর্ধায়ু প্রারম্ভিক গাঢ়ত্বের উপর নির্ভর করে না। (2)

    [5 marks]

    Points the examiner looks for
    • (a) Rate law −d[R]/dt = k[R] and separation of variables (1)(a) হার সমীকরণ −d[R]/dt = k[R] ও চলরাশি পৃথককরণ (1)
    • (a) Integration and evaluating constant at t = 0 (1)(a) সমাকলন ও t = 0-এ ধ্রুবকের মান নির্ণয় (1)
    • (a) Final form k = (2.303/t) log([R]₀/[R]) (1)(a) চূড়ান্ত রূপ k = (2.303/t) log([R]₀/[R]) (1)
    • (b) Substituting [R] = [R]₀/2 to get t½ = 0.693/k (1)(b) [R] = [R]₀/2 বসিয়ে t½ = 0.693/k (1)
    • (b) Conclusion: no [R]₀ term, so independent (1)(b) সিদ্ধান্ত: [R]₀ পদ নেই, তাই নিরপেক্ষ (1)
    Write it, then compare with the full model answer →
  2. 2.
    Write two differences between order and molecularity of a reaction.বিক্রিয়ার ক্রম (order) ও আণবিকতার (molecularity) মধ্যে দুটি পার্থক্য লেখো।

    [2 marks]

    Points the examiner looks for
    • Definition-based difference (experimental vs elementary step) (1)সংজ্ঞাভিত্তিক পার্থক্য (পরীক্ষালব্ধ বনাম প্রাথমিক ধাপ) (1)
    • Values: order can be zero/fractional, molecularity a whole number (1)মান: ক্রম শূন্য/ভগ্নাংশ হতে পারে, আণবিকতা পূর্ণসংখ্যা (1)
    Write it, then compare with the full model answer →
  3. 3.
    (a) What is meant by activation energy? Write the Arrhenius equation and name its terms. (2) (b) The rate of a reaction doubles when the temperature is raised from 300 K to 310 K. Calculate the activation energy of the reaction. (R = 8.314 J K⁻¹ mol⁻¹, log 2 = 0.3010) (3)(a) সক্রিয়করণ শক্তি (activation energy) বলতে কী বোঝ? আরহেনিয়াস সমীকরণটি লেখো ও পদগুলির নাম লেখো। (2) (b) উষ্ণতা 300 K থেকে 310 K করলে একটি বিক্রিয়ার হার দ্বিগুণ হয়। বিক্রিয়াটির সক্রিয়করণ শক্তি নির্ণয় করো। (R = 8.314 J K⁻¹ mol⁻¹, log 2 = 0.3010) (3)

    [5 marks]

    Points the examiner looks for
    • (a) Definition of activation energy (1)(a) সক্রিয়করণ শক্তির সংজ্ঞা (1)
    • (a) Arrhenius equation with terms (1)(a) পদসহ আরহেনিয়াস সমীকরণ (1)
    • (b) Correct two-temperature equation (1)(b) দুই উষ্ণতার সঠিক সমীকরণ (1)
    • (b) Correct substitution (1)(b) সঠিক মান বসানো (1)
    • (b) Ea ≈ 53.6 kJ mol⁻¹ (1)(b) Ea ≈ 53.6 kJ mol⁻¹ (1)
    Write it, then compare with the full model answer →
  4. 4.
    Derive the units of the rate constant for (a) a first-order reaction (1) (b) a second-order reaction (1). Take concentration in mol L⁻¹ and time in s.(a) প্রথম ক্রম বিক্রিয়ার (1) ও (b) দ্বিতীয় ক্রম বিক্রিয়ার (1) হার ধ্রুবকের (rate constant) একক নির্ণয় করো। গাঢ়ত্ব mol L⁻¹ এবং সময় s এককে ধরো।

    [2 marks]

    Points the examiner looks for
    • (a) k = rate/[A], unit s⁻¹ (1)(a) k = হার/[A], একক s⁻¹ (1)
    • (b) k = rate/[A]², unit L mol⁻¹ s⁻¹ (1)(b) k = হার/[A]², একক L mol⁻¹ s⁻¹ (1)
    Write it, then compare with the full model answer →
  5. 5.
    In a first-order reaction the concentration of the reactant falls from 0.8 mol L⁻¹ to 0.2 mol L⁻¹ in 40 minutes. Calculate (a) the rate constant (2) (b) the half-life (1) (c) the time needed for 90% completion of the reaction. (2) (log 2 = 0.3010)একটি প্রথম ক্রম বিক্রিয়ায় বিক্রিয়কের গাঢ়ত্ব 40 মিনিটে 0.8 mol L⁻¹ থেকে কমে 0.2 mol L⁻¹ হয়। নির্ণয় করো (a) হার ধ্রুবক (2) (b) অর্ধায়ু (1) (c) বিক্রিয়াটির 90% সম্পূর্ণ হতে প্রয়োজনীয় সময়। (2) (log 2 = 0.3010)

    [5 marks]

    Points the examiner looks for
    • (a) Correct formula and substitution (1)(a) সঠিক সূত্র ও মান বসানো (1)
    • (a) k = 0.0347 min⁻¹ (1)(a) k = 0.0347 min⁻¹ (1)
    • (b) t½ = 20 min (1)(b) t½ = 20 min (1)
    • (c) [R]₀/[R] = 10 for 90% completion (1)(c) 90% সম্পূর্ণতায় [R]₀/[R] = 10 (1)
    • (c) t ≈ 66.4 min (1)(c) t ≈ 66.4 min (1)
    Write it, then compare with the full model answer →

Coordination Compounds (সন্নিবেশ যৌগ)

10 marks set
  1. 1.
    State the main postulates of Werner's theory of coordination compounds. Explain, on this basis, the number of moles of AgCl precipitated per mole of [Co(NH₃)₅Cl]Cl₂ with excess AgNO₃ solution.সন্নিবেশ যৌগ সংক্রান্ত ওয়ের্নারের তত্ত্বের (Werner's theory) মূল স্বীকার্যগুলি লেখো। এর ভিত্তিতে ব্যাখ্যা করো, অতিরিক্ত AgNO₃ দ্রবণের সঙ্গে প্রতি মোল [Co(NH₃)₅Cl]Cl₂ থেকে কত মোল AgCl অধঃক্ষিপ্ত হয়।

    [3 marks]

    Points the examiner looks for
    • Primary valency: oxidation state, ionisable (1)মুখ্য যোজ্যতা: জারণ অবস্থা, আয়নযোগ্য (1)
    • Secondary valency: coordination number, non-ionisable, directional (1)গৌণ যোজ্যতা: সন্নিবেশ সংখ্যা, অ-আয়নযোগ্য, অভিমুখী (1)
    • Application: 2 Cl⁻ ionisable, 2 mol AgCl (1)প্রয়োগ: 2টি Cl⁻ আয়নযোগ্য, 2 mol AgCl (1)
    Write it, then compare with the full model answer →
  2. 2.
    Using valence bond theory, compare [Ni(CN)₄]²⁻ and [NiCl₄]²⁻ with respect to hybridisation, geometry and magnetic behaviour. (Ni = 28)যোজ্যতা বন্ধন তত্ত্ব (VBT) প্রয়োগ করে [Ni(CN)₄]²⁻ ও [NiCl₄]²⁻-এর সংকরায়ণ, জ্যামিতিক গঠন ও চৌম্বক আচরণের তুলনা করো। (Ni = 28)

    [3 marks]

    Points the examiner looks for
    • Ni²⁺ is 3d⁸; strong vs weak field ligand (1)Ni²⁺ হলো 3d⁸; সবল বনাম দুর্বল ক্ষেত্র লিগ্যান্ড (1)
    • [Ni(CN)₄]²⁻: dsp², square planar, diamagnetic (1)[Ni(CN)₄]²⁻: dsp², বর্গাকার সমতলীয়, তিরশ্চৌম্বক (1)
    • [NiCl₄]²⁻: sp³, tetrahedral, paramagnetic (1)[NiCl₄]²⁻: sp³, চতুস্তলকীয়, অনুচৌম্বক (1)
    Write it, then compare with the full model answer →
  3. 3.
    [Co(NH₃)₆]³⁺ is an inner orbital complex while [CoF₆]³⁻ is an outer orbital complex. Explain using valence bond theory and calculate the spin-only magnetic moment of [CoF₆]³⁻. (Co = 27)[Co(NH₃)₆]³⁺ একটি অন্তঃকক্ষক (inner orbital) জটিল কিন্তু [CoF₆]³⁻ একটি বহিঃকক্ষক (outer orbital) জটিল — যোজ্যতা বন্ধন তত্ত্বের সাহায্যে ব্যাখ্যা করো এবং [CoF₆]³⁻-এর কেবল-ঘূর্ণন চৌম্বক ভ্রামক নির্ণয় করো। (Co = 27)

    [3 marks]

    Points the examiner looks for
    • [Co(NH₃)₆]³⁺: pairing, d²sp³, inner orbital, diamagnetic (1)[Co(NH₃)₆]³⁺: যুগ্মন, d²sp³, অন্তঃকক্ষক, তিরশ্চৌম্বক (1)
    • [CoF₆]³⁻: no pairing, sp³d², outer orbital, 4 unpaired e⁻ (1)[CoF₆]³⁻: যুগ্মন নেই, sp³d², বহিঃকক্ষক, 4টি অযুগ্ম e⁻ (1)
    • μ = √24 = 4.90 BM (1)μ = √24 = 4.90 BM (1)
    Write it, then compare with the full model answer →
  4. 4.
    Explain the splitting of d orbitals in an octahedral crystal field. Calculate the crystal field stabilisation energy (CFSE) of a d⁴ ion in (a) a weak field and (b) a strong field (ignore pairing energy).অষ্টতলকীয় কেলাস ক্ষেত্রে (octahedral crystal field) d কক্ষকের বিভাজন ব্যাখ্যা করো। একটি d⁴ আয়নের কেলাস ক্ষেত্র সুস্থিতি শক্তি (CFSE) নির্ণয় করো (a) দুর্বল ক্ষেত্রে এবং (b) সবল ক্ষেত্রে (যুগ্মন শক্তি উপেক্ষা করো)।

    [3 marks]

    Points the examiner looks for
    • Splitting into t2g (−0.4Δo) and eg (+0.6Δo) with reason (1)কারণসহ t2g (−0.4Δo) ও eg (+0.6Δo)-তে বিভাজন (1)
    • (a) t2g³eg¹, CFSE = −0.6Δo (1)(a) t2g³eg¹, CFSE = −0.6Δo (1)
    • (b) t2g⁴, CFSE = −1.6Δo (1)(b) t2g⁴, CFSE = −1.6Δo (1)
    Write it, then compare with the full model answer →

Organic Compounds containing Nitrogen (নাইট্রোজেনযুক্ত জৈব যৌগ)

14 marks set
  1. 1.
    How does Hinsberg's reagent help to distinguish primary, secondary and tertiary amines? Write the equations.হিন্সবার্গ বিকারক কীভাবে প্রাইমারি, সেকেন্ডারি ও টার্শিয়ারি অ্যামিন পৃথক করতে সাহায্য করে? সমীকরণ লেখো।

    [3 marks]

    Points the examiner looks for
    • 1° amine: sulphonamide soluble in alkali, with equation (1)1° অ্যামিন: ক্ষারে দ্রাব্য সালফোনামাইড, সমীকরণসহ (1)
    • 2° amine: sulphonamide insoluble in alkali, with equation (1)2° অ্যামিন: ক্ষারে অদ্রাব্য সালফোনামাইড, সমীকরণসহ (1)
    • 3° amine does not react (1)3° অ্যামিন বিক্রিয়া করে না (1)
    Write it, then compare with the full model answer →
  2. 2.
    Starting from benzenediazonium chloride, how will you prepare (a) chlorobenzene (1) (b) benzonitrile (1) (c) iodobenzene (1)? Write the equations.বেঞ্জিনডায়াজোনিয়াম ক্লোরাইড থেকে কীভাবে প্রস্তুত করবে (a) ক্লোরোবেঞ্জিন (1) (b) বেঞ্জোনাইট্রাইল (1) (c) আয়োডোবেঞ্জিন (1)? সমীকরণ লেখো।

    [3 marks]

    Points the examiner looks for
    • (a) Cu₂Cl₂/HCl → C₆H₅Cl (1)(a) Cu₂Cl₂/HCl → C₆H₅Cl (1)
    • (b) CuCN → C₆H₅CN (1)(b) CuCN → C₆H₅CN (1)
    • (c) KI → C₆H₅I (1)(c) KI → C₆H₅I (1)
    Write it, then compare with the full model answer →
  3. 3.
    Describe the coupling reactions of benzenediazonium chloride with (a) phenol and (b) aniline, stating the conditions and the colour of the products.(a) ফেনল ও (b) অ্যানিলিনের সঙ্গে বেঞ্জিনডায়াজোনিয়াম ক্লোরাইডের কাপলিং বিক্রিয়া (coupling reaction) শর্ত ও উৎপন্ন পদার্থের রংসহ বর্ণনা করো।

    [3 marks]

    Points the examiner looks for
    • Diazonium ion as electrophile at para position, azo group retained (1)ডায়াজোনিয়াম আয়ন ইলেকট্রোফাইল, প্যারা অবস্থানে, অ্যাজো গ্রুপ অক্ষুণ্ণ (1)
    • (a) Phenol, mildly alkaline, orange p-hydroxyazobenzene (1)(a) ফেনল, মৃদু ক্ষারীয়, কমলা p-হাইড্রক্সিঅ্যাজোবেঞ্জিন (1)
    • (b) Aniline, mildly acidic, yellow p-aminoazobenzene (1)(b) অ্যানিলিন, মৃদু আম্লিক, হলুদ p-অ্যামিনোঅ্যাজোবেঞ্জিন (1)
    Write it, then compare with the full model answer →
  4. 4.
    Write the reagents and equations for the following conversions: (a) nitrobenzene to aniline (1) (b) aniline to benzenediazonium chloride (1) (c) benzenediazonium chloride to benzene (1).নিচের রূপান্তরগুলির বিকারক ও সমীকরণ লেখো: (a) নাইট্রোবেঞ্জিন থেকে অ্যানিলিন (1) (b) অ্যানিলিন থেকে বেঞ্জিনডায়াজোনিয়াম ক্লোরাইড (1) (c) বেঞ্জিনডায়াজোনিয়াম ক্লোরাইড থেকে বেঞ্জিন (1)।

    [3 marks]

    Points the examiner looks for
    • (a) Sn/HCl reduction, correct equation (1)(a) Sn/HCl বিজারণ, সঠিক সমীকরণ (1)
    • (b) NaNO₂/HCl at 273–278 K, correct equation (1)(b) 273–278 K-এ NaNO₂/HCl, সঠিক সমীকরণ (1)
    • (c) H₃PO₂ (or ethanol), correct equation (1)(c) H₃PO₂ (বা ইথানল), সঠিক সমীকরণ (1)
    Write it, then compare with the full model answer →
  5. 5.
    Describe the Gabriel phthalimide synthesis of ethylamine, with equations for each step.প্রতিটি ধাপের সমীকরণসহ গ্যাব্রিয়েল থ্যালিমাইড সংশ্লেষণে ইথাইলঅ্যামিন প্রস্তুতি বর্ণনা করো।

    [3 marks]

    Points the examiner looks for
    • Step 1: phthalimide + KOH → potassium phthalimide (1)ধাপ 1: থ্যালিমাইড + KOH → পটাশিয়াম থ্যালিমাইড (1)
    • Step 2: + C₂H₅Br → N-ethylphthalimide (1)ধাপ 2: + C₂H₅Br → N-ইথাইলথ্যালিমাইড (1)
    • Step 3: alkaline hydrolysis → C₂H₅NH₂ (1)ধাপ 3: ক্ষারীয় আর্দ্রবিশ্লেষণ → C₂H₅NH₂ (1)
    Write it, then compare with the full model answer →

d- and f-Block Elements (d- ও f-ব্লক মৌল)

12 marks set
  1. 1.
    Calculate the spin-only magnetic moments of Mn²⁺, Cr³⁺ and Cu²⁺ ions. (Atomic numbers: Cr = 24, Mn = 25, Cu = 29)Mn²⁺, Cr³⁺ ও Cu²⁺ আয়নগুলির কেবল-ঘূর্ণন (spin-only) চৌম্বক ভ্রামক নির্ণয় করো। (পারমাণবিক সংখ্যা: Cr = 24, Mn = 25, Cu = 29)

    [3 marks]

    Points the examiner looks for
    • Mn²⁺: 3d⁵, n = 5, 5.92 BM (1)Mn²⁺: 3d⁵, n = 5, 5.92 BM (1)
    • Cr³⁺: 3d³, n = 3, 3.87 BM (1)Cr³⁺: 3d³, n = 3, 3.87 BM (1)
    • Cu²⁺: 3d⁹, n = 1, 1.73 BM (1)Cu²⁺: 3d⁹, n = 1, 1.73 BM (1)
    Write it, then compare with the full model answer →
  2. 2.
    What is lanthanoid contraction? What is its cause? Write one important consequence of it.ল্যান্থানয়েড সংকোচন (lanthanoid contraction) কী? এর কারণ কী? এর একটি গুরুত্বপূর্ণ ফলাফল লেখো।

    [3 marks]

    Points the examiner looks for
    • Definition (1)সংজ্ঞা (1)
    • Cause: imperfect shielding by 4f electrons (1)কারণ: 4f ইলেকট্রনের অসম্পূর্ণ আবরণ (1)
    • One consequence, e.g. Zr–Hf similar radii (1)একটি ফলাফল, যেমন Zr–Hf-এর প্রায় সমান ব্যাসার্ধ (1)
    Write it, then compare with the full model answer →
  3. 3.
    How is potassium dichromate prepared from chromite ore? Write the balanced equations of the steps.ক্রোমাইট আকরিক থেকে কীভাবে পটাশিয়াম ডাইক্রোমেট প্রস্তুত করা হয়? ধাপগুলির সমতাযুক্ত সমীকরণ লেখো।

    [3 marks]

    Points the examiner looks for
    • Fusion of chromite with Na₂CO₃ in air, balanced equation (1)বায়ুতে Na₂CO₃-সহ ক্রোমাইট গলানো, সমতাযুক্ত সমীকরণ (1)
    • Acidification of Na₂CrO₄ to Na₂Cr₂O₇ (1)Na₂CrO₄-কে আম্লিক করে Na₂Cr₂O₇ (1)
    • Conversion to K₂Cr₂O₇ with KCl (1)KCl দিয়ে K₂Cr₂O₇-এ রূপান্তর (1)
    Write it, then compare with the full model answer →
  4. 4.
    (a) How is potassium permanganate prepared from pyrolusite (MnO₂)? Write the equations. (2) (b) Why is KMnO₄ deep purple even though manganese in it has no d electrons? (1)(a) পাইরোলুসাইট (MnO₂) থেকে কীভাবে পটাশিয়াম পারম্যাঙ্গানেট প্রস্তুত করা হয়? সমীকরণ লেখো। (2) (b) KMnO₄-এ ম্যাঙ্গানিজের কোনো d ইলেকট্রন না থাকা সত্ত্বেও এটি গাঢ় বেগুনি কেন? (1)

    [3 marks]

    Points the examiner looks for
    • (a) Fusion of MnO₂ with KOH and air to K₂MnO₄ (1)(a) KOH ও বায়ুসহ MnO₂ গলিয়ে K₂MnO₄ (1)
    • (a) Disproportionation/oxidation of MnO₄²⁻ to MnO₄⁻ (1)(a) MnO₄²⁻-এর অসমবিভাজন/জারণে MnO₄⁻ (1)
    • (b) Mn(+7) is d⁰; colour from charge transfer (1)(b) Mn(+7) d⁰; রং চার্জ ট্রান্সফারের জন্য (1)
    Write it, then compare with the full model answer →
  5. 5.
    Give reasons: (a) Zn²⁺ salts are colourless but Cu²⁺ salts are coloured. (1) (b) Transition elements show variable oxidation states. (1) (c) Manganese shows the largest number of oxidation states in the 3d series. (1)কারণ দাও: (a) Zn²⁺ লবণ বর্ণহীন কিন্তু Cu²⁺ লবণ রঙিন। (1) (b) সন্ধিগত মৌলগুলি পরিবর্তনশীল জারণ অবস্থা দেখায়। (1) (c) 3d শ্রেণিতে ম্যাঙ্গানিজ সর্বাধিক সংখ্যক জারণ অবস্থা দেখায়। (1)

    [3 marks]

    Points the examiner looks for
    • (a) d¹⁰ no d–d transition vs d⁹ d–d transition (1)(a) d¹⁰-এ d–d স্থানান্তর নেই, d⁹-এ আছে (1)
    • (b) Close energies of (n−1)d and ns orbitals (1)(b) (n−1)d ও ns কক্ষকের কাছাকাছি শক্তি (1)
    • (c) 3d⁵4s²: seven electrons available, +2 to +7 (1)(c) 3d⁵4s²: সাতটি ইলেকট্রন, +2 থেকে +7 (1)
    Write it, then compare with the full model answer →

Aldehydes, Ketones and Carboxylic Acids (অ্যালডিহাইড, কিটোন ও কার্বক্সিলিক অ্যাসিড)

10 marks set
  1. 1.
    (a) Why are aldehydes generally more reactive than ketones towards nucleophilic addition? Arrange HCHO, CH₃CHO and CH₃COCH₃ in decreasing order of this reactivity. (2) (b) Why are the α-hydrogens of aldehydes and ketones acidic? Describe the aldol condensation of ethanal with the equation. (3)(a) কেন্দ্রাকর্ষী যুত বিক্রিয়ায় (nucleophilic addition) অ্যালডিহাইড সাধারণত কিটোনের চেয়ে বেশি সক্রিয় কেন? HCHO, CH₃CHO ও CH₃COCH₃-কে এই সক্রিয়তার অধঃক্রমে সাজাও। (2) (b) অ্যালডিহাইড ও কিটোনের α-হাইড্রোজেন আম্লিক কেন? সমীকরণসহ ইথান্যালের অ্যালডল ঘনীভবন বর্ণনা করো। (3)

    [5 marks]

    Points the examiner looks for
    • (a) +I effect and steric hindrance of two alkyl groups (1)(a) দুটি অ্যালকাইল গ্রুপের +I প্রভাব ও স্টেরিক বাধা (1)
    • (a) Order HCHO > CH₃CHO > CH₃COCH₃ (1)(a) ক্রম HCHO > CH₃CHO > CH₃COCH₃ (1)
    • (b) Acidity due to resonance-stabilised enolate ion (1)(b) রেজোন্যান্স-সুস্থিত এনোলেট আয়নের জন্য আম্লিকতা (1)
    • (b) Aldol formation with dil. NaOH, equation (1)(b) লঘু NaOH-সহ অ্যালডল গঠন, সমীকরণ (1)
    • (b) Dehydration to but-2-enal on heating (1)(b) উত্তাপে বিউট-2-ইন্যালে নিরুদন (1)
    Write it, then compare with the full model answer →
  2. 2.
    Write the equations for the following name reactions: (a) Rosenmund reduction (1) (b) Stephen reaction (1) (c) Etard reaction (1) (d) Friedel-Crafts acylation of benzene to give acetophenone (1). (e) Why is the palladium catalyst poisoned with BaSO₄ in the Rosenmund reduction? (1)নিচের নামযুক্ত বিক্রিয়াগুলির সমীকরণ লেখো: (a) রোজেনমুন্ড বিজারণ (1) (b) স্টিফেন বিক্রিয়া (1) (c) ইটার্ড বিক্রিয়া (1) (d) বেঞ্জিনের ফ্রিডেল-ক্রাফটস অ্যাসাইলেশনে অ্যাসিটোফেনোন প্রস্তুতি (1)। (e) রোজেনমুন্ড বিজারণে প্যালাডিয়াম অনুঘটককে BaSO₄ দিয়ে বিষক্রিয়া (poison) করা হয় কেন? (1)

    [5 marks]

    Points the examiner looks for
    • (a) Rosenmund equation (1)(a) রোজেনমুন্ড সমীকরণ (1)
    • (b) Stephen equation with hydrolysis (1)(b) আর্দ্রবিশ্লেষণসহ স্টিফেন সমীকরণ (1)
    • (c) Etard equation (1)(c) ইটার্ড সমীকরণ (1)
    • (d) Friedel-Crafts acylation equation (1)(d) ফ্রিডেল-ক্রাফটস অ্যাসাইলেশন সমীকরণ (1)
    • (e) Poisoning stops reduction at aldehyde stage (1)(e) বিষক্রিয়ায় বিজারণ অ্যালডিহাইড স্তরে থামে (1)
    Write it, then compare with the full model answer →
  3. 3.
    (a) What is the Cannizzaro reaction? Explain it with benzaldehyde as an example. Why does ethanal not undergo this reaction? (2) (b) How will you distinguish between ethanal and propanone by two chemical tests? Write the equations and observations. (3)(a) ক্যানিজারো বিক্রিয়া (Cannizzaro reaction) কী? বেঞ্জালডিহাইডের উদাহরণসহ ব্যাখ্যা করো। ইথান্যাল এই বিক্রিয়া দেয় না কেন? (2) (b) দুটি রাসায়নিক পরীক্ষার সাহায্যে ইথান্যাল ও প্রোপানোনকে কীভাবে পৃথক করবে? সমীকরণ ও পর্যবেক্ষণ লেখো। (3)

    [5 marks]

    Points the examiner looks for
    • (a) Definition with benzaldehyde equation (1)(a) বেঞ্জালডিহাইডের সমীকরণসহ সংজ্ঞা (1)
    • (a) Ethanal has α-H, so gives aldol instead (1)(a) ইথান্যালে α-H আছে, তাই অ্যালডল দেয় (1)
    • (b) Tollens' test with observation (1)(b) পর্যবেক্ষণসহ টলেন্স পরীক্ষা (1)
    • (b) Fehling's test with observation (1)(b) পর্যবেক্ষণসহ ফেলিং পরীক্ষা (1)
    • (b) Equations for the tests (1)(b) পরীক্ষাগুলির সমীকরণ (1)
    Write it, then compare with the full model answer →
  4. 4.
    (a) Why are carboxylic acids more acidic than alcohols? (2) (b) Arrange FCH₂COOH, ClCH₂COOH, BrCH₂COOH and CH₃COOH in decreasing order of acid strength and explain. (2) (c) Write the Hell-Volhard-Zelinsky reaction of acetic acid. (1)(a) কার্বক্সিলিক অ্যাসিড অ্যালকোহলের চেয়ে বেশি আম্লিক কেন? (2) (b) FCH₂COOH, ClCH₂COOH, BrCH₂COOH ও CH₃COOH-কে আম্লিক শক্তির অধঃক্রমে সাজাও ও ব্যাখ্যা করো। (2) (c) অ্যাসিটিক অ্যাসিডের হেল-ভলহার্ড-জেলিনস্কি (HVZ) বিক্রিয়াটি লেখো। (1)

    [5 marks]

    Points the examiner looks for
    • (a) Carboxylate ion resonance-stabilised over two O atoms (1)(a) কার্বক্সিলেট আয়ন দুটি O-তে রেজোন্যান্স-সুস্থিত (1)
    • (a) Alkoxide ion has no resonance, charge localised (1)(a) অ্যালকক্সাইড আয়নে রেজোন্যান্স নেই, আধান স্থানীকৃত (1)
    • (b) Correct order (1)(b) সঠিক ক্রম (1)
    • (b) Explanation by −I effect F > Cl > Br and +I of CH₃ (1)(b) −I প্রভাব F > Cl > Br ও CH₃-এর +I দিয়ে ব্যাখ্যা (1)
    • (c) HVZ equation with Cl₂/red P (1)(c) Cl₂/লাল P-সহ HVZ সমীকরণ (1)
    Write it, then compare with the full model answer →