NEET (Medical) · Chemistry
Hydrocarbons
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Hydrocarbons — quick revision notes
- Alkane preparation: H2/Pt or Ni on alkenes and alkynes; Wurtz (2RX + 2Na in dry ether gives R–R, a mixture with two different RX); decarboxylation (RCOONa + NaOH/CaO gives R–H, one carbon fewer); Kolbe electrolysis (2RCOONa gives R–R at the anode, even-carbon alkanes; CH4 cannot be made this way).
- Ethane conformations: staggered is the most stable and eclipsed the least; the barrier is about 12.5 kJ/mol, so rotation is not completely free (torsional strain). Halogenation reactivity: F2 > Cl2 > Br2 > I2; ease of replacing H: 3° > 2° > 1°.
- Alkyne reduction: Lindlar's catalyst gives the cis-alkene, Na/liquid NH3 gives the trans-alkene. Elimination: alcoholic KOH on RX (dehydrohalogenation, Saytzeff product is major); Zn on vicinal dihalides; conc. H2SO4 on alcohols.
- Addition to alkenes: HX follows Markovnikov's rule through the more stable carbocation; the peroxide (Kharasch) effect works only for HBr and gives the anti-Markovnikov product; HX reactivity is HI > HBr > HCl; Baeyer's reagent gives a diol; ozonolysis followed by Zn/H2O gives carbonyl compounds.
- Alkynes: acidity HC≡CH > CH2=CH2 > CH3CH3 because of 50% s-character; only terminal alkynes react with Na or NaNH2; hydration with HgSO4/H2SO4 gives ethanal from ethyne and ketones from higher alkynes; at 873 K in a red-hot iron tube, 3C2H2 gives C6H6.
- Aromaticity (Hückel): the molecule must be planar, cyclic and fully conjugated with (4n + 2) π electrons. Benzene, the cyclopentadienyl anion and the tropylium cation are aromatic; the cyclopentadienyl cation and cyclobutadiene are antiaromatic; cyclooctatetraene is non-planar. Benzene has 12 σ and 3 π bonds.
- Electrophilic substitution of benzene: nitration (NO2⁺), sulphonation (SO3), halogenation (X⁺ with FeX3/AlCl3), Friedel–Crafts alkylation and acylation (anhydrous AlCl3). With Cl2 under UV and no catalyst, addition gives C6H6Cl6 (BHC).
- Directive influence: –OH, –NH2, –OR, –CH3 are o/p directing and activating; –X is o/p directing but deactivating; –NO2, –CN, –CHO, –COOH, –SO3H are meta directing and deactivating. Combustion of CxHy: 1 vol needs (x + y/4) vol of O2 and gives x vol of CO2.
Common mistakes to avoid
- Applying the peroxide effect to HCl or HI; anti-Markovnikov addition in the presence of peroxide happens only with HBr.
- Assuming hydration of every alkyne gives an aldehyde: only ethyne gives ethanal, and propyne and higher alkynes give ketones.
- Counting only the methyl-type hydrogens when counting monochloro isomers; work through every carbon and group the symmetry-equivalent ones.
- Calling a ring aromatic just because it has 6 π electrons, while ignoring an sp3 carbon (cycloheptatriene) or non-planarity (cyclooctatetraene).
Hydrocarbons — solved practice questions
8 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1mediumReport
A mixture of CH3Br and C2H5Br is treated with sodium in dry ether (Wurtz reaction). Which alkanes are formed?
- AOnly propane
- BEthane and butane only
- CPropane and butane only
- DEthane, propane and butane
Show answer & solution
Correct answer: (D) Ethane, propane and butane
The coupling can be CH3–CH3 (ethane), CH3–C2H5 (propane) or C2H5–C2H5 (butane). This is why Wurtz is a poor method for alkanes with an odd number of carbons. - Q2mediumReport
Which hydrocarbon is formed at the anode when an aqueous solution of sodium propanoate is electrolysed (Kolbe's electrolysis)?
- AButane
- BHexane
- CPropane
- DEthane
Show answer & solution
Correct answer: (A) Butane
2CH3CH2COO⁻ → CH3CH2–CH2CH3 + 2CO2 + 2e⁻. Two ethyl radicals join to give butane. - Q3easyReport
Sodium butanoate (CH3CH2CH2COONa) is heated with soda lime. Which alkane is formed?
- APropane
- BButane
- CPentane
- DEthane
Show answer & solution
Correct answer: (A) Propane
Decarboxylation removes CO2 as Na2CO3, so the alkane formed has one carbon fewer than the acid salt: C4 salt → C3H8 (propane). - Q4hardReport
How many structurally isomeric monochloro products are possible on free-radical chlorination of 2-methylbutane?
- A5
- B4
- C3
- D6
Show answer & solution
Correct answer: (B) 4
(CH3)2CH–CH2–CH3 has 4 distinct types of H: the two equivalent C1 methyls, C2, C3 and C4. This gives 1-chloro-2-methyl-, 2-chloro-2-methyl-, 2-chloro-3-methyl- and 1-chloro-3-methylbutane. - Q5mediumReport
What volume of O2 at STP is needed to completely burn 11 g of propane? (C = 12, H = 1; molar volume at STP = 22.4 L)
- A22.4 L
- B16.8 L
- C5.6 L
- D28.0 L
Show answer & solution
Correct answer: (D) 28.0 L
C3H8 + 5O2 → 3CO2 + 4H2O. 11 g = 0.25 mol of propane, which needs 1.25 mol O2 = 1.25 × 22.4 = 28.0 L (check: 44 g needs 112 L, so 11 g needs 28 L). - Q6mediumReport
Statement I: Rotation about the C–C bond in ethane is completely free because there is no energy barrier between conformations. Statement II: The staggered conformation of ethane has less torsional strain than the eclipsed conformation.
- ABoth Statement I and Statement II are false
- BStatement I is true but Statement II is false
- CStatement I is false but Statement II is true
- DBoth Statement I and Statement II are true
Show answer & solution
Correct answer: (C) Statement I is false but Statement II is true
There is a small barrier of about 12.5 kJ/mol, so rotation is not completely free. The staggered form has minimum torsional strain and is the more stable form. - Q7mediumReport
But-2-yne gives X with H2 over Lindlar's catalyst (Pd on CaCO3/BaSO4 partly poisoned) and Y with sodium in liquid NH3. What are X and Y?
- AX = cis-but-2-ene, Y = trans-but-2-ene
- BX = butane, Y = trans-but-2-ene
- CX = trans-but-2-ene, Y = cis-but-2-ene
- DBoth X and Y are cis-but-2-ene
Show answer & solution
Correct answer: (A) X = cis-but-2-ene, Y = trans-but-2-ene
Lindlar hydrogenation is syn addition and stops at the cis-alkene. Na/liquid NH3 is a dissolving-metal reduction and gives the trans-alkene. - Q8mediumReport
With which reagent is the peroxide (Kharasch) effect, i.e. anti-Markovnikov addition to propene, observed?
- AHI
- BHCl
- CHBr
- DHF
Show answer & solution
Correct answer: (C) HBr
Only HBr adds by a free-radical chain in the presence of peroxide. The H–Cl bond is too strong to give radicals, and an iodine radical combines to I2 instead of adding.
Ready to test yourself? Take the 22-question Hydrocarbons test →