JEE (Main + Adv) · Chemistry
d- and f-Block Elements
29 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
d- and f-Block Elements — quick revision notes
- Exceptional configurations: Cr [Ar]3d⁵4s¹ and Cu [Ar]3d¹⁰4s¹. Remove 4s electrons before 3d when forming ions. Zn, Cd and Hg (d¹⁰) are not transition elements.
- Spin-only μ = √(n(n+2)) BM: n = 1, 2, 3, 4, 5 gives 1.73, 2.83, 3.87, 4.90, 5.92 BM. Gd³⁺ (4f⁷) gives 7.94 BM. d⁰ and d¹⁰ ions are diamagnetic and show no d–d colour, so simple aquated ions such as Sc³⁺ and Zn²⁺ are colourless; oxo-anions such as MnO₄⁻ and Cr₂O₇²⁻ are still coloured, through ligand-to-metal charge transfer.
- E°(M²⁺/M) is positive only for Cu (+0.34 V). Mn³⁺/Mn²⁺ (+1.57 V) makes Mn³⁺ an oxidant (gives d⁵). Cr³⁺/Cr²⁺ (−0.41 V) makes Cr²⁺ a reductant (gives t₂g³). Cu⁺ disproportionates in water.
- Acidic KMnO₄: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O (n = 5). Neutral or faintly alkaline: MnO₄⁻ → MnO₂ (n = 3), with I⁻ → IO₃⁻. Ratios: 2MnO₄⁻ : 5C₂O₄²⁻ and MnO₄⁻ : 5Fe²⁺.
- Acidic K₂Cr₂O₇: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O (n = 6, equivalent mass 294/6 = 49), with Cr₂O₇²⁻ : 6Fe²⁺. 2CrO₄²⁻ (yellow) + 2H⁺ ⇌ Cr₂O₇²⁻ (orange) is not a redox change.
- KMnO₄ preparation: 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ (green) + 2H₂O, then 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O. MnO₄²⁻ is d¹ and paramagnetic; MnO₄⁻ is d⁰, diamagnetic and coloured by charge transfer.
- Oxides: lower oxidation state is basic (MnO, CrO), intermediate is amphoteric (Cr₂O₃), higher is acidic (CrO₃, Mn₂O₇). V₂O₅, although it is vanadium's highest oxide, is amphoteric (mainly acidic). The highest 3d oxidation state is Mn +7.
- Lanthanoid contraction makes Zr and Hf nearly the same size, and basicity falls from La(OH)₃ to Lu(OH)₃. Ce⁴⁺ is an oxidant, while Eu²⁺ and Yb²⁺ are reductants. Actinoids show more oxidation states (5f, 6d, 7s close in energy) and a larger contraction.
Common mistakes to avoid
- Writing Fe²⁺ as 3d⁴4s² or Cu²⁺ as 3d⁷4s². The 4s electrons leave first, so Fe²⁺ is 3d⁶ and Cu²⁺ is 3d⁹.
- Using n = 5 for KMnO₄ in neutral or alkaline medium (it is 3), or n = 3 for dichromate (it is 6 per Cr₂O₇²⁻).
- Calling the chromate–dichromate change a redox reaction. Cr stays +6.
- Attributing the colour of KMnO₄ or K₂Cr₂O₇ to d–d transitions. Both are d⁰, and the colour comes from ligand-to-metal charge transfer.
d- and f-Block Elements — solved practice questions
7 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
What is the ground-state electronic configuration of copper (Z = 29)?
- A[Ar] 3d⁹ 4s²
- B[Ar] 3d¹⁰ 4p¹
- C[Ar] 3d⁸ 4s² 4p¹
- D[Ar] 3d¹⁰ 4s¹
Show answer & solution
Correct answer: (D) [Ar] 3d¹⁰ 4s¹
A completely filled 3d¹⁰ subshell has extra exchange-energy stability, so Cu is 3d¹⁰ 4s¹ rather than 3d⁹ 4s². Cr shows a similar exception: 3d⁵ 4s¹. - Q2easyReport
What is the spin-only magnetic moment of Mn²⁺ (Z of Mn = 25)?
- A4.90 BM
- B6.93 BM
- C5.92 BM
- D3.87 BM
Show answer & solution
Correct answer: (C) 5.92 BM
Mn²⁺ is 3d⁵ with n = 5 unpaired electrons. μ = √(n(n+2)) = √35 ≈ 5.92 BM. - Q3mediumReport
Which gaseous ion has a spin-only magnetic moment of about 2.84 BM?
- ATi³⁺
- BCr³⁺
- CMn²⁺
- DV³⁺
Show answer & solution
Correct answer: (D) V³⁺
√(n(n+2)) = 2.84 gives n = 2, since √8 = 2.83. V³⁺ is 3d², with 2 unpaired electrons. Ti³⁺ (d¹) has 1, Cr³⁺ (d³) has 3 and Mn²⁺ (d⁵) has 5. - Q4easyReport
Which of these ions is colourless in aqueous solution?
- ACu²⁺
- BV³⁺
- CSc³⁺
- DTi³⁺
Show answer & solution
Correct answer: (C) Sc³⁺
Sc³⁺ is 3d⁰, so no d–d transition is possible and the solution is colourless. Ti³⁺ (d¹), V³⁺ (d²) and Cu²⁺ (d⁹) all have partly filled d subshells and are coloured. - Q5easyReport
Zn, Cd and Hg are not regarded as transition elements because:
- Athey are liquids at room temperature
- Bthey have completely filled d orbitals (d¹⁰) in the ground state and in their common oxidation states
- Cthey have no d electrons at all
- Dthey show only the +1 oxidation state
Show answer & solution
Correct answer: (B) they have completely filled d orbitals (d¹⁰) in the ground state and in their common oxidation states
A transition element has an incompletely filled d subshell in the atom or in a common ion. Zn, Cd and Hg are (n−1)d¹⁰ ns², and their M²⁺ ions are d¹⁰, so they do not meet this definition. - Q6mediumReport
Which 3d metal has a positive standard reduction potential, E°(M²⁺/M)?
- ACu
- BNi
- CZn
- DFe
Show answer & solution
Correct answer: (A) Cu
E°(Cu²⁺/Cu) = +0.34 V. The high enthalpy of atomisation plus ionisation enthalpy of Cu is not offset by the hydration enthalpy of Cu²⁺, so Cu does not displace H₂ from dilute acids. Zn, Fe and Ni all have negative E° values. - Q7mediumReport
Statement I: Cr²⁺ is a reducing agent while Mn³⁺ is an oxidising agent, although both are d⁴ ions. Statement II: Cr²⁺ → Cr³⁺ gives the stable half-filled t₂g³ configuration, while Mn³⁺ → Mn²⁺ gives the stable half-filled d⁵ configuration. Choose the correct option.
- ABoth statements are true, but Statement II does not explain Statement I
- BBoth statements are true and Statement II correctly explains Statement I
- CStatement I is true, Statement II is false
- DStatement I is false, Statement II is true
Show answer & solution
Correct answer: (B) Both statements are true and Statement II correctly explains Statement I
E°(Cr³⁺/Cr²⁺) = −0.41 V, so Cr²⁺ is readily oxidised, and E°(Mn³⁺/Mn²⁺) = +1.57 V, so Mn³⁺ is readily reduced. In each case the change produces a more stable configuration (t₂g³ and d⁵), which is exactly the explanation in Statement II.
Ready to test yourself? Take the 22-question d- and f-Block Elements test →