JEE (Main + Adv) · Chemistry
Chemical Kinetics
29 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Chemical Kinetics — quick revision notes
- Rate for aA + bB → cC + dD = −(1/a)d[A]/dt = (1/c)d[C]/dt. Units of k for order n: (mol L⁻¹)1−n s⁻¹.
- Zero order: [A] = [A]₀ − kt and t₁/₂ = [A]₀/2k. First order: k = (2.303/t)log([A]₀/[A]) and t₁/₂ = 0.693/k, independent of [A]₀.
- First-order shortcuts: t₇₅ = 2t₁/₂, t₈₇.₅ = 3t₁/₂, t₉₉ = 2t₉₀, t₉₉.₉ = 10t₁/₂. The fraction left after n half-lives is (1/2)ⁿ.
- Gas phase A → B + C at constant V: p_A = 2P₀ − P_t, so k = (2.303/t)log[P₀/(2P₀ − P_t)].
- General half-life: t₁/₂ ∝ [A]₀1−n. For second order with equal concentrations, 1/[A] − 1/[A]₀ = kt and t₁/₂ = 1/(k[A]₀).
- Arrhenius: k = Ae−Ea/RT; log(k₂/k₁) = (Ea/2.303R)(T₂ − T₁)/(T₁T₂). Slope of ln k against 1/T is −Ea/R; slope of log k against 1/T is −Ea/(2.303R).
- Collision theory: rate = P·Z_AB·e−Ea/RT, where P is the orientation (steric) factor. A catalyst lowers Ea equally in both directions and does not change ΔH, ΔG or K.
- Order is experimental and can be zero, fractional or negative. Molecularity applies only to elementary steps and is a whole number (1–3). The slow step sets the rate law, and pre-equilibrium intermediates are replaced using K.
Common mistakes to avoid
- Mixing ln and log: using slope × R instead of slope × 2.303R for a log k plot, or leaving out 2.303 in the two-temperature formula.
- Taking the order from the stoichiometric coefficients of the overall equation instead of from experimental data or the slow step.
- Leaving an intermediate (e.g. N₂O₂ or F) in the final rate law instead of substituting it through the equilibrium constant.
- Thinking that higher concentration raises k; it raises the rate, while k depends only on T (and a catalyst).
Chemical Kinetics — solved practice questions
7 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
For the reaction 2N₂O₅ → 4NO₂ + O₂, NO₂ forms at 2.0 × 10⁻² mol L⁻¹ s⁻¹. At what rate does N₂O₅ disappear?
- A2.0 × 10⁻² mol L⁻¹ s⁻¹
- B1.0 × 10⁻² mol L⁻¹ s⁻¹
- C5.0 × 10⁻³ mol L⁻¹ s⁻¹
- D4.0 × 10⁻² mol L⁻¹ s⁻¹
Show answer & solution
Correct answer: (B) 1.0 × 10⁻² mol L⁻¹ s⁻¹
Rate = −(1/2)d[N₂O₅]/dt = (1/4)d[NO₂]/dt. So −d[N₂O₅]/dt = (2/4) × 2.0 × 10⁻² = 1.0 × 10⁻² mol L⁻¹ s⁻¹. - Q2easyReport
What are the units of the rate constant of a second-order reaction?
- Amol L⁻¹ s⁻¹
- BL mol⁻¹ s⁻¹
- CL² mol⁻² s⁻¹
- Ds⁻¹
Show answer & solution
Correct answer: (B) L mol⁻¹ s⁻¹
For order n, k has units (mol L⁻¹)1−n s⁻¹. For n = 2 this gives (mol L⁻¹)⁻¹ s⁻¹ = L mol⁻¹ s⁻¹. - Q3mediumReport
For A + B → products, the initial-rate data are: Run 1: [A] = 0.1 M, [B] = 0.1 M, rate = 2.0 × 10⁻³ M s⁻¹ Run 2: [A] = 0.2 M, [B] = 0.1 M, rate = 8.0 × 10⁻³ M s⁻¹ Run 3: [A] = 0.1 M, [B] = 0.2 M, rate = 4.0 × 10⁻³ M s⁻¹ What is the rate law?
- ARate = k[A]²[B]
- BRate = k[A][B]²
- CRate = k[A]²[B]²
- DRate = k[A][B]
Show answer & solution
Correct answer: (A) Rate = k[A]²[B]
From runs 1→2, doubling [A] multiplies the rate by 4, so the order in A is 2. From runs 1→3, doubling [B] doubles the rate, so the order in B is 1. Rate = k[A]²[B], overall order 3. - Q4easyReport
The rate constant of a first-order reaction is 2.31 × 10⁻³ s⁻¹. What is its half-life?
- A433 s
- B300 s
- C600 s
- D150 s
Show answer & solution
Correct answer: (B) 300 s
t₁/₂ = 0.693/k = 0.693/(2.31 × 10⁻³) = 300 s. - Q5mediumReport
For a first-order reaction, what is the ratio of the time for 99% completion to the time for 90% completion?
- A2
- B3
- C1.5
- D10
Show answer & solution
Correct answer: (A) 2
t = (2.303/k)log(a/(a − x)). For 99%, log 100 = 2; for 90%, log 10 = 1. The ratio is 2 : 1 = 2. - Q6mediumReport
A first-order reaction is 75% complete in 60 min. How long does it take to reach 87.5% completion?
- A75 min
- B80 min
- C90 min
- D120 min
Show answer & solution
Correct answer: (C) 90 min
75% completion takes 2 half-lives, so t₁/₂ = 30 min. 87.5% completion means 1/8 remains, which is 3 half-lives = 90 min. Check: t ∝ log(a/(a − x)), and log 8/log 4 = 3/2, so 60 × 1.5 = 90 min. - Q7hardReport
20% of a first-order reactant decomposes in 10 minutes. What is its approximate half-life? (log 1.25 = 0.0969)
- A31 min
- B50 min
- C25 min
- D40 min
Show answer & solution
Correct answer: (A) 31 min
k = (2.303/10)log(100/80) = 0.2303 × 0.0969 = 0.0223 min⁻¹. t₁/₂ = 0.693/0.0223 ≈ 31 min. Check: t₁/₂ = 10 × log 2/log 1.25 = 10 × 0.301/0.0969 ≈ 31 min.
Ready to test yourself? Take the 22-question Chemical Kinetics test →