Class 10 (ICSE) · Chemistry
Study of Compounds: HCl, Ammonia, Nitric Acid, Sulphuric Acid
20 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Study of Compounds: HCl, Ammonia, Nitric Acid, Sulphuric Acid — quick revision notes
- HCl lab method: NaCl + conc. H2SO4 below 200 deg C gives NaHSO4 + HCl. Dry the gas with conc. H2SO4 and collect it by upward displacement of air, because it is heavier than air and very soluble in water.
- Hydrochloric acid is made by dissolving HCl gas in water through an inverted funnel that just touches the water. The funnel prevents back suction and gives a larger surface for absorption.
- Tests for HCl: dense white fumes of NH4Cl with ammonia, and a curdy white precipitate of AgCl with AgNO3. The AgCl is soluble in NH4OH but insoluble in HNO3. Aqua regia is 3 parts conc. HCl to 1 part conc. HNO3 by volume, and it dissolves gold and platinum.
- NH3 lab method: 2NH4Cl + Ca(OH)2 gives CaCl2 + 2H2O + 2NH3. Dry it only with quicklime (CaO) and collect it by downward displacement of air. Nitrides also give NH3 with warm water, for example Mg3N2 + 6H2O gives 3Mg(OH)2 + 2NH3.
- Haber's process: N2 and H2 in the ratio 1:3, at 450-500 deg C and 200-900 atm. The catalyst is finely divided iron and the promoter is molybdenum.
- NH3 reactions: it burns in O2 to give N2, and Pt-catalysed oxidation at about 800 deg C gives NO. It reduces hot CuO to reddish-brown Cu. With excess Cl2 it gives NCl3 + HCl, and with excess NH3 it gives NH4Cl + N2.
- Aqueous NH3 precipitates: Cu(OH)2 is pale blue and dissolves in excess to a deep blue solution. Zn(OH)2 is white and gelatinous and dissolves in excess. Pb(OH)2 is chalky white and does not dissolve. Fe(OH)2 is dirty green and Fe(OH)3 reddish brown, and neither dissolves.
- HNO3: KNO3 + conc. H2SO4 gives KHSO4 + HNO3, made in an all-glass apparatus. Conc. HNO3 with Cu gives brown NO2, while dilute HNO3 gives colourless NO. Very dilute (about 1%) HNO3 gives H2 with Mg and Mn.
- Contact process: SO2 is oxidised to SO3 over V2O5 at about 450 deg C. The SO3 is absorbed in conc. H2SO4 to form oleum (H2S2O7), which is then diluted. Conc. H2SO4 acts as a dehydrating agent (it chars sugar and turns blue vitriol white) and as an oxidising agent (with C and S it gives SO2). It is dibasic, forming NaHSO4 and Na2SO4.
Common mistakes to avoid
- Drying ammonia with conc. H2SO4, P2O5 or anhydrous CaCl2. All three react with NH3, so only CaO is used.
- Confusing the catalyst with the promoter in Haber's process. Iron is the catalyst and molybdenum is the promoter.
- Assuming every metal gives H2 with nitric acid. Only Mg and Mn do, and only with very dilute (about 1%) acid, because HNO3 is a strong oxidising agent.
- Writing that SO3 is dissolved directly in water in the Contact process. It forms a dense acid mist, so it is absorbed in conc. H2SO4 instead.
Study of Compounds: HCl, Ammonia, Nitric Acid, Sulphuric Acid — solved practice questions
5 ICSE 10 Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1mediumReport
In the laboratory preparation of hydrogen chloride, sodium chloride is heated with concentrated sulphuric acid at a temperature below 200 deg C. What are the products?
- ASodium sulphate and chlorine
- BSodium bisulphate and chlorine
- CSodium bisulphate and hydrogen chloride
- DSodium sulphate and hydrogen chloride
Show answer & solution
Correct answer: (C) Sodium bisulphate and hydrogen chloride
Below 200 deg C the reaction is NaCl + H2SO4 -> NaHSO4 + HCl. Sodium sulphate forms only at much higher temperatures, which wastes fuel and can crack the glass apparatus. That is why the temperature is kept low. - Q2easyReport
Which drying agent is used to dry hydrogen chloride gas in the laboratory?
- AQuicklime
- BConcentrated sulphuric acid
- CPhosphorus pentoxide
- DSodium hydroxide pellets
Show answer & solution
Correct answer: (B) Concentrated sulphuric acid
Concentrated sulphuric acid absorbs moisture and does not react with HCl gas. Quicklime and sodium hydroxide are bases and would react with the acidic gas. Phosphorus pentoxide is not used to dry HCl. - Q3easyReport
When concentrated sulphuric acid is added to sugar, the sugar turns into a black, spongy mass of carbon. Which property of the acid does this show?
- ADibasic nature
- BOxidising property
- CNon-volatile nature
- DDehydrating property
Show answer & solution
Correct answer: (D) Dehydrating property
Concentrated H2SO4 removes the elements of water from sugar: C12H22O11 -> 12C + 11H2O. The carbon left behind is the black mass. Taking away hydrogen and oxygen in the ratio 2:1 is called dehydration. - Q4mediumReport
The fountain experiment is done with a flask of dry hydrogen chloride gas and water coloured with blue litmus. What colour is the fountain?
- AColourless
- BRed
- CPink
- DBlue
Show answer & solution
Correct answer: (B) Red
HCl is extremely soluble in water. A few drops of water dissolve so much gas that the pressure in the flask falls, and more water rushes up as a fountain. The HCl dissolves to form hydrochloric acid, which turns blue litmus red. - Q5easyReport
Hydrochloric acid is prepared by passing HCl gas into water through an inverted funnel that just touches the surface of the water. What is the funnel for?
- ATo prevent back suction of water and to give a larger surface area for absorbing the gas
- BTo dry the gas before it dissolves
- CTo collect the gas by upward displacement of air
- DTo heat the water
Show answer & solution
Correct answer: (A) To prevent back suction of water and to give a larger surface area for absorbing the gas
HCl is so soluble that water could be sucked back into the generating flask if the delivery tube dipped directly into the water. The wide rim of the funnel prevents this back suction and also gives a large surface for the gas to dissolve.
Ready to test yourself? Take the 15-question Study of Compounds: HCl, Ammonia, Nitric Acid, Sulphuric Acid test →