CUET UG

Physics

4 chapters · 99 practice questions with full solutions — all free.

Reviewed by (19 years teaching)Written with AI help

Full Physics section test

40 questions across the whole section · 40 min · one timed test

Start →

Physics: solved examples

A taste of each chapter's practice set — try it, then open the answer and solution.

  1. Electrostatics and Current Electricity

    A cell of emf 1.5 V has a terminal voltage of 1.2 V when it delivers a current of 0.6 A to an external resistor. What is the internal resistance of the cell?

    • A0.3 ohm
    • B0.2 ohm
    • C2 ohm
    • D0.5 ohm
    Show answer & solution

    Correct answer: (D) 0.5 ohm

    For a discharging cell, V = E - Ir, so r = (E - V)/I = (1.5 - 1.2)/0.6 = 0.3/0.6 = 0.5 ohm.

  2. Magnetic Effects of Current, Magnetism, EMI and Alternating Current

    Match List-I (quantity in AC circuits) with List-II (expression). List-I: A. Inductive reactance; B. Capacitive reactance; C. Resonant frequency of a series LCR circuit; D. Impedance of a series LCR circuit. List-II: I. omega L; II. 1/(omega C); III. 1/(2 pi sqrt(LC)); IV. sqrt(R^2 + (XL - XC)^2). Choose the correct answer from the options given below.

    • AA-I, B-II, C-IV, D-III
    • BA-I, B-III, C-II, D-IV
    • CA-II, B-I, C-III, D-IV
    • DA-I, B-II, C-III, D-IV
    Show answer & solution

    Correct answer: (D) A-I, B-II, C-III, D-IV

    XL = omega L and XC = 1/(omega C). Resonance occurs when XL = XC, giving f0 = 1/(2 pi sqrt(LC)). The series impedance is Z = sqrt(R^2 + (XL - XC)^2). So the match is A-I, B-II, C-III, D-IV.

  3. Electromagnetic Waves and Optics

    In a single-slit diffraction experiment, the slit width is halved and the slit-to-screen distance is doubled. The wavelength stays the same. What happens to the linear width of the central maximum?

    • AIt becomes four times
    • BIt becomes double
    • CIt remains unchanged
    • DIt becomes eight times
    Show answer & solution

    Correct answer: (A) It becomes four times

    The width of the central maximum is W = 2λD/a. With D replaced by 2D and a by a/2, the new width is 2λ(2D)/(a/2) = 4 × (2λD/a) = 4W.