CUET UG · Chemistry
d- and f-Block Elements and Coordination Compounds
24 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
d- and f-Block Elements and Coordination Compounds — quick revision notes
- Mn2O7 is acidic and MnO is basic: acidic character rises with oxidation state. The highest Mn oxide is Mn2O7, but the highest Mn fluoride is MnF4, because oxygen can form multiple bonds with the metal.
- E°(Mn3+/Mn2+) = +1.57 V is high because Mn2+ is d5. E°(Fe3+/Fe2+) = +0.77 V is low because Fe3+ is d5.
- In acid: 2MnO4− + 5C2O42− + 16H+ -> 2Mn2+ + 10CO2 + 8H2O, and Cr2O72− + 14H+ + 6Fe2+ -> 2Cr3+ + 6Fe3+ + 7H2O.
- Catalysts: V2O5 (contact process), finely divided Fe (Haber process), Ni (hydrogenation of oils), TiCl4 + Al(CH3)3 (Ziegler-Natta). Mischmetall is about 95% lanthanoid metal and 5% Fe.
- Actinoids show more oxidation states than lanthanoids because 5f, 6d and 7s have similar energies. The contraction from one element to the next is larger in actinoids, and all actinoids are radioactive.
- Werner's theory: the ionisable (outer-sphere) chloride is the chloride precipitated by AgNO3. CoCl3·5NH3 = [CoCl(NH3)5]Cl2, which gives 2 AgCl.
- IUPAC naming: list ligands alphabetically, ignoring multiplying prefixes such as di- and bis-. Use the metal name + 'ate' only for anionic complexes.
- Isomer counts: [Co(en)2Cl2]+ has 3 stereoisomers (trans plus a cis pair of enantiomers). [Cr(H2O)6]Cl3 and [Cr(H2O)5Cl]Cl2·H2O are hydrate (solvate) isomers.
- CFT: a d4 ion with Δo < P is high spin (t2g3 eg1). Without ligands there is no splitting, so anhydrous CuSO4 is white. In carbonyls, σ donation plus π back-donation strengthens the M-C bond and weakens the C-O bond.
Common mistakes to avoid
- Saying that π back-bonding in metal carbonyls strengthens the C-O bond. It weakens it, because electrons enter the CO π* orbital.
- Writing 'cobaltate' for a cationic complex, or ordering ligands by their multiplying prefixes instead of their names.
- Counting only geometrical isomers and forgetting that cis-[M(AA)2X2] has a pair of enantiomers.
- Thinking that fluorine stabilises the highest oxidation state of Mn better than oxygen does.
d- and f-Block Elements and Coordination Compounds — solved practice questions
6 CUET UG Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
Mischmetall is used in magnesium-based alloys for bullets, shells and lighter flints. What does it mainly consist of?
- ANickel and chromium with traces of iron
- BAbout 95% actinoid metal and about 5% iron
- CAbout 95% lanthanoid metal and about 5% iron, with traces of S, C, Ca and Al
- DCopper and zinc in roughly equal amounts
Show answer & solution
Correct answer: (C) About 95% lanthanoid metal and about 5% iron, with traces of S, C, Ca and Al
NCERT describes Mischmetall as an alloy of about 95% lanthanoid metal and about 5% iron, with traces of S, C, Ca and Al. Its Mg-based alloy is used to make bullets, shells and lighter flints. - Q2mediumReport
Match List-I (industrial process) with List-II (catalyst). List-I: A. Contact process (SO2 to SO3) B. Haber process (synthesis of NH3) C. Ziegler-Natta polymerisation of ethene D. Hydrogenation of vegetable oils List-II: I. Finely divided iron II. Finely divided nickel III. Vanadium(V) oxide, V2O5 IV. TiCl4 with Al(CH3)3 Choose the correct answer from the options given below.
- AA-III, B-I, C-II, D-IV
- BA-III, B-I, C-IV, D-II
- CA-IV, B-I, C-III, D-II
- DA-I, B-III, C-IV, D-II
Show answer & solution
Correct answer: (B) A-III, B-I, C-IV, D-II
V2O5 catalyses the oxidation of SO2 in the contact process, and finely divided iron is used in the Haber process. TiCl4 with Al(CH3)3 is the Ziegler-Natta catalyst for making polythene, and nickel catalyses the hydrogenation of oils. - Q3mediumReport
Assertion (A): E°(Mn3+/Mn2+) (+1.57 V) is much more positive than E°(Fe3+/Fe2+) (+0.77 V). Reason (R): Mn2+ has the stable half-filled 3d5 configuration, whereas in the iron couple it is Fe3+ that has the 3d5 configuration. Choose the correct answer.
- AA is true, but R is false
- BBoth A and R are true, but R is not the correct explanation of A
- CA is false, but R is true
- DBoth A and R are true, and R is the correct explanation of A
Show answer & solution
Correct answer: (D) Both A and R are true, and R is the correct explanation of A
Reducing Mn3+ (d4) to Mn2+ (d5) produces an extra-stable configuration, so Mn3+ is easily reduced and the E° value is high. For iron, Fe3+ is the d5 ion and is stable, so Fe3+ is reduced less readily and E° is lower. R therefore explains A correctly. - Q4mediumReport
The highest fluoride of manganese is MnF4, whereas its highest oxide is Mn2O7. What is the reason for this?
- AOxygen is more electronegative than fluorine
- BOxygen can form multiple bonds with the metal atom, which fluorine cannot
- CFluorine atoms are larger than oxygen atoms
- DManganese-fluorine bonds are too weak to exist
Show answer & solution
Correct answer: (B) Oxygen can form multiple bonds with the metal atom, which fluorine cannot
Oxygen can form pi bonds with the metal (as in Mn=O), so fewer oxygen atoms are needed to reach a high oxidation state. Fluorine forms only single bonds. This is why oxygen stabilises Mn(VII) in Mn2O7 while the highest fluoride is MnF4. Option A is wrong because fluorine is the more electronegative element. - Q5easyReport
Which of the following oxides of 3d-series metals is acidic in nature?
- ACuO
- BCr2O3
- CMnO
- DMn2O7
Show answer & solution
Correct answer: (D) Mn2O7
The oxides of a transition metal become more acidic as its oxidation state rises. Mn2O7 (Mn in +7) is acidic and gives permanganic acid, HMnO4. MnO and CuO are basic, and Cr2O3 is amphoteric. - Q6mediumReport
In acidic solution, potassium permanganate oxidises oxalate ions to carbon dioxide. How many moles of oxalate ions are oxidised by 1 mole of MnO4− ions?
- A2.5
- B0.4
- C2
- D5
Show answer & solution
Correct answer: (A) 2.5
The balanced equation is 2MnO4− + 5C2O42− + 16H+ -> 2Mn2+ + 10CO2 + 8H2O. Each MnO4− gains 5 electrons and each C2O42− loses 2, so 1 mol MnO4− oxidises 5/2 = 2.5 mol of oxalate.
Ready to test yourself? Take the 18-question d- and f-Block Elements and Coordination Compounds test →