CUET UG · Chemistry

Haloalkanes, Alcohols, Phenols, Ethers, Aldehydes, Ketones and Carboxylic Acids

25 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
12
medium
4
hard

Haloalkanes, Alcohols, Phenols, Ethers, Aldehydes, Ketones and Carboxylic Acids — quick revision notes

This unit covers three families of organic compounds: haloalkanes and haloarenes (Unit VI), alcohols, phenols and ethers (Unit VII), and aldehydes, ketones and carboxylic acids (Unit VIII). In CUET the questions are mostly about named reactions, predicting products, comparing boiling points, densities and acid strengths, IUPAC names, and the uses and hazards of common polyhalogen compounds. Stereochemistry of SN reactions (inversion, racemisation, chirality) and how each functional group is prepared are tested every year.
  • A carbon atom bonded to four different groups is chiral. 2-Chlorobutane is optically active, but 1-chlorobutane, 2-chloropropane and 2-chloro-2-methylpropane are not.
  • Density rises with the number and mass of halogen atoms: CH2Cl2 (1.336) < CHCl3 (1.489) < CCl4 (1.595) g/mL. Iodides are denser than bromides, which are denser than chlorides.
  • Chloroform is slowly oxidised by air in light to poisonous phosgene (COCl2), so it is stored in closed, dark-coloured bottles filled to the top. Iodoform was used as an antiseptic, freons as refrigerants and aerosol propellants, and CH2Cl2 as a paint remover.
  • DDT was the first chlorinated organic insecticide. Animals do not break it down quickly, so it builds up in fatty tissue.
  • With a Grignard reagent followed by hydrolysis: HCHO gives a 1° alcohol, other aldehydes give 2° alcohols and ketones give 3° alcohols. With CO2 (dry ice) a Grignard reagent gives a carboxylic acid, and with a nitrile it gives a ketone.
  • Ethanol with conc. H2SO4 gives ethene at 443 K but ethoxyethane at 413 K. Over heated Cu at 573 K, 1° and 2° alcohols are dehydrogenated to aldehydes and ketones, while 3° alcohols are dehydrated to alkenes.
  • HI cleaves an ether with a tertiary alkyl group by SN1, so the iodide forms on the tertiary carbon: (CH3)3C-O-CH3 gives (CH3)3C-I and CH3OH.
  • Aldehydes with no alpha-H, such as HCHO and C6H5CHO, undergo the Cannizzaro reaction with concentrated alkali: one molecule is reduced to an alcohol and the other is oxidised to a carboxylate salt.
  • Carbonyl compounds react with ammonia derivatives: NH2OH gives an oxime, NH2NH2 a hydrazone, C6H5NHNH2 a phenylhydrazone and NH2CONHNH2 a semicarbazone. Gattermann-Koch: benzene + CO + HCl (anhydrous AlCl3/CuCl) gives benzaldehyde.

Common mistakes to avoid

  • Reading the 413 K and 443 K conditions the wrong way round. The lower temperature gives the ether and the higher temperature gives the alkene.
  • Expecting a tertiary alcohol to give a ketone over hot copper. It has no H on the carbinol carbon, so it dehydrates to an alkene instead.
  • With HI and a methyl tert-butyl ether, putting the iodine on the methyl group as in SN2. The stable tertiary carbocation makes the reaction SN1, so the iodide is tertiary.
  • In IUPAC names, when the substituent locants tie, the substituent that comes first in alphabetical order gets the lower number (chloro before methyl).
Exam tip: Each wrong answer costs 1 mark, so for every product question first identify the substrate (1°, 2° or 3°; alpha-H present or not) and the exact conditions (temperature, dry or aqueous, reagent) before you choose. Most traps depend on one changed condition.

Haloalkanes, Alcohols, Phenols, Ethers, Aldehydes, Ketones and Carboxylic Acids — solved practice questions

6 CUET UG Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1mediumReport

    Match List-I with List-II. List-I (Compound): (A) Dichloromethane (B) Trichloromethane (C) Triiodomethane (D) Freon-12 (CCl2F2). List-II (Use): (I) Earlier used as an antiseptic (II) Paint remover (III) Refrigerant in refrigerators and air conditioners (IV) Earlier used as a general anaesthetic in surgery. Choose the correct answer.

    • AA-IV, B-II, C-I, D-III
    • BA-II, B-I, C-IV, D-III
    • CA-II, B-IV, C-I, D-III
    • DA-III, B-IV, C-I, D-II
    Show answer & solution

    Correct answer: (C) A-II, B-IV, C-I, D-III

    Dichloromethane is used as a paint remover and process solvent (A-II). Chloroform was used as a general anaesthetic (B-IV). Iodoform was once used as an antiseptic because it releases free iodine (C-I). Freons are used as refrigerants and aerosol propellants (D-III).
  2. Q2easyReport

    Chloroform is stored in closed, dark-coloured bottles filled right to the top. This is because, in the presence of light, chloroform is slowly oxidised by air to:

    • ACarbonyl chloride (phosgene)
    • BMethanal
    • CDichloromethane
    • DCarbon tetrachloride
    Show answer & solution

    Correct answer: (A) Carbonyl chloride (phosgene)

    In light, air oxidises chloroform: 2CHCl3 + O2 → 2COCl2 + 2HCl. The product, carbonyl chloride (phosgene), is extremely poisonous. Dark bottles keep out light, and filling the bottle to the top keeps out air.
  3. Q3mediumReport

    Consider the following statements about DDT. I. DDT was the first chlorinated organic insecticide. II. Animals break DDT down rapidly, so it does not accumulate in their bodies. III. Paul Muller received the Nobel Prize for discovering how effective DDT is as an insecticide. Which of the statements given above are correct?

    • AII and III only
    • BI, II and III
    • CI and II only
    • DI and III only
    Show answer & solution

    Correct answer: (D) I and III only

    DDT was the first chlorinated organic insecticide, and Paul Muller won the 1948 Nobel Prize for discovering how well it works as an insecticide. Statement II is false: animals do not break DDT down rapidly, so it is stored and builds up in fatty tissue. This is the main problem with using it.
  4. Q4mediumReport

    What is the IUPAC name of CH3-CH(Cl)-CH(CH3)-CH3?

    • A1-Chloro-1,2-dimethylpropane
    • B2-Chloro-3-methylbutane
    • C2-Methyl-3-chlorobutane
    • D3-Chloro-2-methylbutane
    Show answer & solution

    Correct answer: (B) 2-Chloro-3-methylbutane

    The longest chain has four carbons (butane). Numbering from either end gives the substituents the locants 2 and 3, so the tie is broken alphabetically. Chloro comes before methyl, so chloro gets the lower number: 2-chloro-3-methylbutane.
  5. Q5easyReport

    Which of the following haloalkanes is optically active?

    • A1-Chlorobutane
    • B2-Chlorobutane
    • C2-Chloropropane
    • D2-Chloro-2-methylpropane
    Show answer & solution

    Correct answer: (B) 2-Chlorobutane

    In 2-chlorobutane, C-2 carries four different groups (H, Cl, CH3 and C2H5), so it is chiral and the compound is optically active. None of the other compounds has a carbon with four different groups. For example, C-2 of 2-chloropropane carries two CH3 groups.
  6. Q6easyReport

    Which of the following shows the correct order of density of these polyhalogen compounds?

    • ACCl4 < CHCl3 < CH2Cl2
    • BCH2Cl2 < CCl4 < CHCl3
    • CCH2Cl2 < CHCl3 < CCl4
    • DCHCl3 < CH2Cl2 < CCl4
    Show answer & solution

    Correct answer: (C) CH2Cl2 < CHCl3 < CCl4

    Density increases as more heavy halogen atoms replace hydrogen. The values are CH2Cl2 1.336, CHCl3 1.489 and CCl4 1.595 g/mL, so the order is CH2Cl2 < CHCl3 < CCl4.

Ready to test yourself? Take the 19-question Haloalkanes, Alcohols, Phenols, Ethers, Aldehydes, Ketones and Carboxylic Acids test →