Time & Work, Speed & Boats: The Bank Exam Arithmetic Playbook

A friendly, exam-ready guide to time and work, pipes and cisterns, speed and distance, trains and boats for IBPS and SBI exams, built around two ideas: count work in units and use relative speed.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

8 min read · Published 1 November 2026

Part of Banking (IBPS / SBI) prep

The tiffin factory and the auto ride

Imagine a small tiffin kitchen in Pune that must pack 60 lunch boxes. Ramesh packs 3 boxes a minute and Sunita packs 2. Nobody thinks in fractions like 'Ramesh does 1/20 of the job each minute'. You just say: together they pack 5 boxes a minute, so 60 boxes take 12 minutes. Now picture two autos on the same road. If one is behind the other, what matters is only how fast the gap closes. Time and work is about counting boxes; speed and distance is about watching the gap. Hold on to these two pictures and this whole chapter becomes easy.

What this chapter tests in bank exams

In IBPS and SBI exams (PO and Clerk), these topics usually appear as single arithmetic word problems in Prelims and sometimes inside harder caselets in Mains. The maths is simple; the marks are lost on method. Students who use fractions for work and forget unit conversions for trains waste time and fall into option traps. In this guide you will learn one method for each sub-topic: the LCM unit method for work and pipes, the relative speed idea for trains, and the D and U formulas for boats.

Time & Work: think in units, not fractions

Total work = LCM of the days given. Efficiency (units per day) = Total work ÷ Days. Time taken together = Total work ÷ (sum of efficiencies). Work done = Efficiency × Days.

The LCM method in four steps

  1. 1Write down each person's days to finish the job alone.
  2. 2Take the LCM of those days as the total work in units.
  3. 3Divide the total by each person's days to get units per day.
  4. 4Add (or subtract) the units per day as the question needs, then divide the work left by that rate.

Worked example: three workers together

A, B and C can finish a job in 10, 15 and 30 days respectively. How long do they take together?

Total work = LCM of 10, 15 and 30 = 30 units.

A = 30 ÷ 10 = 3 units a day, B = 30 ÷ 15 = 2, C = 30 ÷ 30 = 1.

Together = 3 + 2 + 1 = 6 units a day.

Time = 30 ÷ 6 = 5 days.

Answer = 5 days

When the question talks about efficiency instead of days, give the units directly. 'A is twice as efficient as B' means A = 2 units a day and B = 1. '50% more efficient' means 3 : 2. '25% less efficient' means 3 : 4. Then multiply one person's efficiency by their days to get the total work.

Worked example: efficiency question

A is twice as efficient as B. B alone finishes a job in 24 days. How long do A and B take together?

Let B = 1 unit a day, so A = 2 units a day.

Total work = 1 × 24 = 24 units.

Together = 2 + 1 = 3 units a day.

Time = 24 ÷ 3 = 8 days.

Answer = 8 days

Wages: pay follows work

When people share a payment for a job, each person gets money in the ratio of the work they did, which is efficiency × days worked. If everyone works for the same number of days, the ratio is simply the ratio of efficiencies. Never share money in the ratio of days taken alone; that is the reverse of the correct ratio.

Worked example: sharing wages

Ravi can do a job in 12 days and Meena in 24 days. They do it together and get ₹9,000. Find each share.

Total work = LCM of 12 and 24 = 24 units.

Ravi = 2 units a day, Meena = 1 unit a day, ratio 2 : 1.

Ravi's share = 9,000 × 2/3 = ₹6,000.

Meena's share = 9,000 × 1/3 = ₹3,000.

Answer = ₹6,000 and ₹3,000

Pipes & cisterns: work with a plus and minus sign

A pipe filling a tank is just a worker doing positive work. A pipe emptying the tank, or a leak, is a worker doing negative work. Take the tank capacity as the LCM of all the hours given, give each filling pipe a plus rate and each emptying pipe a minus rate, then add.

Worked example: filling with an outlet open

Pipe A fills a tank in 20 hours. Pipe B empties the full tank in 30 hours. Both are opened on an empty tank. When will it be full?

Capacity = LCM of 20 and 30 = 60 units.

A fills +3 units an hour, B empties −2 units an hour.

Net = 3 − 2 = 1 unit an hour.

Time = 60 ÷ 1 = 60 hours.

Answer = 60 hours

In leak questions, the leak's rate is the difference between the pipe's normal rate and the slower net rate. If a pipe fills in 8 hours but takes 10 hours with a leak, use LCM 40: pipe = 5 units, net = 4 units, leak = 1 unit an hour, so the leak empties the full tank in 40 hours. Answering 10 − 8 = 2 hours is the classic trap.

Quick check

A can finish a job in 6 days and B can finish it in 12 days. In how many days will they finish it together?

Speed, time & distance: the basics

Speed = Distance ÷ Time. km/h × 5/18 = m/s, and m/s × 18/5 = km/h. Average speed = Total distance ÷ Total time. For equal distances at speeds x and y: average speed = 2xy ÷ (x + y).
km/hm/skm/hm/s
1857220
36109025
541510830

Worked example: round-trip average speed

A bus goes from Patna to Gaya at 30 km/h and returns at 50 km/h. Find the average speed.

Equal distances, so use 2xy ÷ (x + y).

= (2 × 30 × 50) ÷ (30 + 50) = 3000 ÷ 80 = 37.5 km/h.

Check with 150 km each way: 5 hours + 3 hours = 8 hours for 300 km, and 300 ÷ 8 = 37.5.

Answer = 37.5 km/h

The simple average of the two speeds, (30 + 50) ÷ 2 = 40, is almost always one of the options and it is always wrong for equal distances. The vehicle spends more time at the slower speed, so the true average is pulled below the simple average.

Relative speed: watch the gap

When two objects move, what matters is how fast the distance between them changes. Moving in the same direction, the gap changes at the difference of speeds. Moving towards each other or away from each other, it changes at the sum of speeds.

Worked example: the chase

A thief on a scooter rides at 40 km/h. A police jeep 2 km behind chases at 50 km/h in the same direction. When does the jeep catch up?

Same direction, so relative speed = 50 − 40 = 10 km/h.

Gap to close = 2 km.

Time = 2 ÷ 10 = 1/5 hour = 12 minutes.

Answer = 12 minutes

Trains: what is being crossed?

SituationDistance coveredSpeed used
Train crosses a pole, man or signalLength of trainTrain speed
Train crosses a platform, bridge or tunnelTrain length + platform lengthTrain speed
Two trains, opposite directionsSum of both lengthsSum of speeds
Two trains, same directionSum of both lengthsDifference of speeds
Train passes a man walkingLength of trainTrain speed ± man's speed

Worked example: two trains, both directions

Trains of 120 m and 130 m run on parallel tracks at 60 km/h and 30 km/h. Find the crossing time in each case.

Distance = 120 + 130 = 250 m in both cases.

Opposite directions: 60 + 30 = 90 km/h = 25 m/s, so time = 250 ÷ 25 = 10 seconds.

Same direction: 60 − 30 = 30 km/h = 25/3 m/s, so time = 250 × 3/25 = 30 seconds.

Answer = 10 seconds and 30 seconds

Quick check

A train 180 m long running at 72 km/h crosses a bridge 220 m long. How much time does it take?

Boats & streams: with or against the current

B = speed of boat in still water, S = speed of stream. Downstream speed D = B + S. Upstream speed U = B − S. B = (D + U) ÷ 2. S = (D − U) ÷ 2.

Worked example: there and back

A boat's speed in still water is 12 km/h and the stream flows at 4 km/h. How long does it take to go 48 km downstream and come back?

D = 12 + 4 = 16 km/h, so downstream time = 48 ÷ 16 = 3 hours.

U = 12 − 4 = 8 km/h, so upstream time = 48 ÷ 8 = 6 hours.

Total = 3 + 6 = 9 hours.

Answer = 9 hours

If a question gives distances and times, first find D and U as plain speeds, then use the half-sum and half-difference. Downstream is always the faster one. If a round-trip question gives the total time, set up time up + time down = total, and check the options by plugging them in; that is often quicker than solving the equation.

Quick check

A boat goes downstream at 16 km/h and upstream at 10 km/h. What is the speed of the boat in still water?

Quick revision

  • Time and work: total work = LCM of days, add units per day, divide.
  • Efficiency ratio is the reverse of the time ratio: twice as efficient means half the time.
  • Wages are shared in the ratio of work done, not days taken.
  • Pipes: filling pipes are plus, emptying pipes and leaks are minus.
  • Convert km/h to m/s with × 5/18 before using metres and seconds.
  • Equal-distance average speed = 2xy ÷ (x + y), never the simple average.
  • Same direction: subtract speeds. Opposite directions: add speeds.
  • Trains: add the platform or the other train's length to the distance.
  • Boats: D = B + S, U = B − S, B = (D + U) ÷ 2, S = (D − U) ÷ 2.
Exam strategy: these are usually 45 to 60 second questions once the method is automatic. Read the question once, write the LCM or the converted speed, and say to yourself what is covering what distance. If a number in the options looks like the simple average, the sum of days or the still-water speed, treat it as a likely trap and check it before you mark it.

Ready to test yourself?

Lock it in with the practice test for this chapter.

Take the practice test

Keep studying

See all Banking (IBPS / SBI) study material →