Higher Secondary 2027 (WBCHSE) · রসায়নবিদ্যা
Polymers (পলিমার) — Sem III
20 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Polymers (পলিমার) — Sem III — quick revision notes
- Natural: starch, cellulose, proteins, natural rubber; semi-synthetic: cellulose acetate (rayon), cellulose nitrate; synthetic: polythene, nylon 6,6, Buna-S.প্রাকৃতিক: স্টার্চ, সেলুলোজ, প্রোটিন, প্রাকৃতিক রবার; অর্ধ-সংশ্লেষিত: সেলুলোজ অ্যাসিটেট (রেয়ন), সেলুলোজ নাইট্রেট; সংশ্লেষিত: পলিথিন, নাইলন 6,6, Buna-S।
- Addition polymers (polythene, PVC, Teflon, polystyrene, polyacrylonitrile) form without loss of any molecule; condensation polymers (nylon, terylene, bakelite) form with loss of small molecules such as H2O.যুত পলিমার (পলিথিন, PVC, টেফলন, পলিস্টাইরিন, পলিঅ্যাক্রাইলোনাইট্রাইল) কোনো অণু অপসারণ ছাড়াই গঠিত হয়; ঘনীভবন পলিমার (নাইলন, টেরিলিন, ব্যাকেলাইট) H2O-এর মতো ক্ষুদ্র অণু অপসারণের মাধ্যমে গঠিত হয়।
- LDPE: free-radical addition of ethene at 1000-2000 atm, 350-570 K, traces of O2 or peroxide; highly branched. HDPE: Ziegler-Natta catalyst (triethylaluminium + TiCl4) at 333-343 K and 6-7 atm; linear.LDPE: 1000-2000 atm চাপে, 350-570 K উষ্ণতায়, সামান্য O2 বা পারক্সাইডের উপস্থিতিতে ইথিনের মুক্ত-মূলক যুত পলিমারকরণ; অত্যন্ত শাখাযুক্ত। HDPE: 333-343 K ও 6-7 atm-এ জিগলার-নাট্টা অনুঘটক (ট্রাইইথাইল অ্যালুমিনিয়াম + TiCl4); রৈখিক।
- Nylon 6,6 = hexamethylenediamine + adipic acid; nylon 6 = caprolactam; terylene (Dacron) = ethylene glycol + terephthalic acid.নাইলন 6,6 = হেক্সামিথিলিন ডাইঅ্যামিন + অ্যাডিপিক অ্যাসিড; নাইলন 6 = ক্যাপ্রোল্যাকটাম; টেরিলিন (ডেক্রন) = ইথিলিন গ্লাইকল + টেরেপথ্যালিক অ্যাসিড।
- Bakelite = phenol + formaldehyde; novolac (linear) on further heating with formaldehyde gives cross-linked, thermosetting bakelite.ব্যাকেলাইট = ফেনল + ফরম্যালডিহাইড; নোভোল্যাক (রৈখিক) ফরম্যালডিহাইডের সঙ্গে আরও উত্তপ্ত হলে ক্রস-লিঙ্কযুক্ত, তাপ-দৃঢ় ব্যাকেলাইট উৎপন্ন হয়।
- Natural rubber = cis-1,4-polyisoprene (monomer isoprene, 2-methyl-1,3-butadiene); vulcanisation = heating with sulphur at 373-415 K to form S cross-links. Neoprene = polychloroprene.প্রাকৃতিক রবার = cis-1,4-পলিআইসোপ্রিন (মনোমার আইসোপ্রিন, 2-মিথাইল-1,3-বিউটাডাইন); ভালকানাইজেশন = 373-415 K উষ্ণতায় সালফারের সঙ্গে উত্তপ্ত করে S ক্রস-লিঙ্ক তৈরি। নিওপ্রিন = পলিক্লোরোপ্রিন।
- Copolymers: Buna-S = 1,3-butadiene + styrene; Buna-N = 1,3-butadiene + acrylonitrile.সহপলিমার: Buna-S = 1,3-বিউটাডাইন + স্টাইরিন; Buna-N = 1,3-বিউটাডাইন + অ্যাক্রাইলোনাইট্রাইল।
- Biodegradable: PHBV (3-hydroxybutanoic acid + 3-hydroxypentanoic acid) and nylon-2-nylon 6 (glycine + aminocaproic acid); polythene, PVC, Teflon are non-biodegradable.জৈব-বিয়োজ্য: PHBV (3-হাইড্রক্সিবিউটানোয়িক অ্যাসিড + 3-হাইড্রক্সিপেন্টানোয়িক অ্যাসিড) এবং নাইলন-2-নাইলন 6 (গ্লাইসিন + অ্যামিনোক্যাপ্রোয়িক অ্যাসিড); পলিথিন, PVC, টেফলন জৈব-অবিয়োজ্য।
Common mistakes to avoid
- Bakelite and nylon are condensation polymers, not addition polymers, although both are synthetic.
- Ziegler-Natta catalyst gives HDPE (linear), not LDPE; LDPE comes from high-pressure free-radical polymerisation.
- Nylon 6 has a single monomer (caprolactam); do not confuse it with nylon 6,6, which needs two monomers.
- Rayon (cellulose acetate) is semi-synthetic, not natural or fully synthetic.
Polymers (পলিমার) — Sem III — solved practice questions
12 WB HS Chemistry (রসায়নবিদ্যা) questions with step-by-step solutions. Attempt each, then reveal the answer.
Take the timed test first
These questions are in the test, so try it before you read the answers below.
- Q1easyReport
Which of the following is a natural polymer?
নীচের কোনটি একটি প্রাকৃতিক পলিমার?- ANylon 6,6নাইলন 6,6
- BBakeliteব্যাকেলাইট
- CPVCPVC
- DCelluloseসেলুলোজ
Show answer & solution
Correct answer: (D) Cellulose
Cellulose occurs in plants and is a natural polymer of glucose; nylon 6,6, PVC and bakelite are synthetic.সেলুলোজ উদ্ভিদে পাওয়া যায় এবং এটি গ্লুকোজের প্রাকৃতিক পলিমার; নাইলন 6,6, PVC ও ব্যাকেলাইট সংশ্লেষিত পলিমার। - Q2easyReport
Which of the following is a semi-synthetic polymer?
নীচের কোনটি একটি অর্ধ-সংশ্লেষিত পলিমার?- AStarchস্টার্চ
- BPolystyreneপলিস্টাইরিন
- CCellulose acetate (rayon)সেলুলোজ অ্যাসিটেট (রেয়ন)
- DNylon 6,6নাইলন 6,6
Show answer & solution
Correct answer: (C) Cellulose acetate (rayon)
Cellulose acetate is obtained by chemically modifying natural cellulose, so it is semi-synthetic.প্রাকৃতিক সেলুলোজকে রাসায়নিকভাবে পরিবর্তন করে সেলুলোজ অ্যাসিটেট পাওয়া যায়, তাই এটি অর্ধ-সংশ্লেষিত পলিমার। - Q3mediumReport
Natural rubber is a polymer of which monomer?
প্রাকৃতিক রবার কোন মনোমারের পলিমার?- AIsoprene (2-methyl-1,3-butadiene)আইসোপ্রিন (2-মিথাইল-1,3-বিউটাডাইন)
- BChloroprene (2-chloro-1,3-butadiene)ক্লোরোপ্রিন (2-ক্লোরো-1,3-বিউটাডাইন)
- CStyreneস্টাইরিন
- D1,3-Butadiene1,3-বিউটাডাইন
Show answer & solution
Correct answer: (A) Isoprene (2-methyl-1,3-butadiene)
Natural rubber is cis-1,4-polyisoprene, a linear polymer of isoprene; chloroprene gives neoprene.প্রাকৃতিক রবার হল cis-1,4-পলিআইসোপ্রিন, অর্থাৎ আইসোপ্রিনের রৈখিক পলিমার; ক্লোরোপ্রিন থেকে নিওপ্রিন তৈরি হয়। - Q4mediumReport
Polymers such as nylon 6,6 and terylene, which have strong intermolecular forces like hydrogen bonding and high tensile strength, are classified as:
নাইলন 6,6 ও টেরিলিনের মতো পলিমার, যাদের মধ্যে হাইড্রোজেন বন্ধনের মতো শক্তিশালী আন্তঃআণবিক বল এবং উচ্চ প্রসারণ-শক্তি থাকে, তাদের কোন শ্রেণিতে ফেলা হয়?- AFibresতন্তু (ফাইবার)
- BThermoplastic polymersতাপ-নমনীয় পলিমার
- CElastomersস্থিতিস্থাপক (ইলাস্টোমার)
- DThermosetting polymersতাপ-দৃঢ় পলিমার
Show answer & solution
Correct answer: (A) Fibres
Fibres are thread-forming solids with strong intermolecular forces (hydrogen bonds in nylon 6,6, dipole-dipole interactions in terylene), which give them high tensile strength; nylon 6,6 and terylene are typical examples.তন্তু হল সুতো তৈরিতে সক্ষম কঠিন পলিমার, যাদের মধ্যে হাইড্রোজেন বন্ধনের মতো শক্তিশালী আন্তঃআণবিক বল থাকায় প্রসারণ-শক্তি বেশি; নাইলন 6,6 ও টেরিলিন এর সাধারণ উদাহরণ। - Q5hardReport
A sample of polythene, -(CH2-CH2)n-, has a molar mass of 28000 g mol−1. What is its degree of polymerisation n? (C = 12, H = 1)
একটি পলিথিন, -(CH2-CH2)n-, নমুনার মোলার ভর 28000 g mol^-1। এর পলিমারকরণ মাত্রা n কত? (C = 12, H = 1)- A10001000
- B500500
- C2828
- D20002000
Show answer & solution
Correct answer: (A) 1000
Repeating unit C2H4 has mass 2(12) + 4(1) = 28 g mol−1, so n = 28000/28 = 1000; check: 28000/14 = 2000 CH2 groups, i.e. 1000 C2H4 units.পুনরাবৃত্ত একক C2H4-এর ভর 2(12) + 4(1) = 28 g mol^-1, তাই n = 28000/28 = 1000; যাচাই: 28000/14 = 2000টি CH2 গ্রুপ, অর্থাৎ 1000টি C2H4 একক। - Q6easyReport
Which of the following is a condensation polymer?
নীচের কোনটি একটি ঘনীভবন পলিমার?- APVCPVC
- BTeflonটেফলন
- CPolytheneপলিথিন
- DTeryleneটেরিলিন
Show answer & solution
Correct answer: (D) Terylene
Terylene forms from ethylene glycol and terephthalic acid with loss of water, so it is a condensation polymer; the others are addition polymers.ইথিলিন গ্লাইকল ও টেরেপথ্যালিক অ্যাসিড থেকে জল অপসারণের মাধ্যমে টেরিলিন তৈরি হয়, তাই এটি ঘনীভবন পলিমার; বাকিগুলি যুত পলিমার। - Q7mediumReport
Low density polythene (LDPE) is prepared by:
নিম্ন ঘনত্বের পলিথিন (LDPE) প্রস্তুত করা হয়:- AFree-radical addition polymerisation of ethene at 1000-2000 atm with traces of oxygen or peroxide1000-2000 atm চাপে সামান্য অক্সিজেন বা পারক্সাইডের উপস্থিতিতে ইথিনের মুক্ত-মূলক যুত পলিমারকরণে
- BCondensation of ethene with waterজলের সঙ্গে ইথিনের ঘনীভবনে
- CZiegler-Natta catalysed polymerisation of ethene at 6-7 atm6-7 atm চাপে জিগলার-নাট্টা অনুঘটকের সাহায্যে ইথিনের পলিমারকরণে
- DIonic polymerisation of ethyneইথাইনের আয়নীয় পলিমারকরণে
Show answer & solution
Correct answer: (A) Free-radical addition polymerisation of ethene at 1000-2000 atm with traces of oxygen or peroxide
LDPE is made by high-pressure free-radical polymerisation of ethene initiated by traces of O2 or peroxide, giving a highly branched structure.সামান্য O2 বা পারক্সাইড দ্বারা সূচিত উচ্চ চাপে ইথিনের মুক্ত-মূলক পলিমারকরণে LDPE তৈরি হয়, যার গঠন অত্যন্ত শাখাযুক্ত। - Q8mediumReport
High density polythene (HDPE) is obtained using which catalyst?
উচ্চ ঘনত্বের পলিথিন (HDPE) কোন অনুঘটক ব্যবহার করে পাওয়া যায়?- ATriethylaluminium and titanium tetrachloride (Ziegler-Natta catalyst)ট্রাইইথাইল অ্যালুমিনিয়াম ও টাইটানিয়াম টেট্রাক্লোরাইড (জিগলার-নাট্টা অনুঘটক)
- BBenzoyl peroxideবেঞ্জয়েল পারক্সাইড
- CSulphurসালফার
- DHexamethylenetetramineহেক্সামিথিলিন টেট্রাঅ্যামিন
Show answer & solution
Correct answer: (A) Triethylaluminium and titanium tetrachloride (Ziegler-Natta catalyst)
HDPE is formed when ethene is polymerised at 333-343 K and 6-7 atm with the Ziegler-Natta catalyst, giving linear, closely packed chains.333-343 K উষ্ণতায় ও 6-7 atm চাপে জিগলার-নাট্টা অনুঘটকের উপস্থিতিতে ইথিনের পলিমারকরণে HDPE তৈরি হয়, যার শৃঙ্খলগুলি রৈখিক ও ঘনসন্নিবিষ্ট। - Q9mediumReport
Buna-S is a copolymer of:
Buna-S কোন দুটি মনোমারের সহপলিমার?- A1,3-Butadiene and acrylonitrile1,3-বিউটাডাইন ও অ্যাক্রাইলোনাইট্রাইল
- BChloroprene onlyকেবল ক্লোরোপ্রিন
- CIsoprene and styreneআইসোপ্রিন ও স্টাইরিন
- D1,3-Butadiene and styrene1,3-বিউটাডাইন ও স্টাইরিন
Show answer & solution
Correct answer: (D) 1,3-Butadiene and styrene
Buna-S is formed by copolymerisation of 1,3-butadiene and styrene; butadiene with acrylonitrile gives Buna-N.1,3-বিউটাডাইন ও স্টাইরিনের সহপলিমারকরণে Buna-S তৈরি হয়; বিউটাডাইন ও অ্যাক্রাইলোনাইট্রাইল থেকে Buna-N তৈরি হয়। - Q10hardReport
Which statement about polymerisation is correct?
পলিমারকরণ সম্পর্কে কোন বিবৃতিটি সঠিক?- AA copolymer is formed from only one kind of monomerসহপলিমার কেবল একপ্রকার মনোমার থেকে গঠিত হয়
- BThe repeating unit of polythene has the same composition as ethene, whereas the repeating unit of nylon 6,6 is lighter than the sum of its two monomers by two H2O moleculesপলিথিনের পুনরাবৃত্ত এককের সংযুতি ইথিনের সমান, কিন্তু নাইলন 6,6-এর পুনরাবৃত্ত একক তার দুটি মনোমারের মোট ভরের থেকে দুটি H2O অণুর সমান হালকা
- CAddition polymerisation always releases a molecule of water at each stepযুত পলিমারকরণের প্রতিটি ধাপে সর্বদা একটি জলের অণু নির্গত হয়
- DCondensation polymerisation can occur only through free-radical chain reactionsঘনীভবন পলিমারকরণ কেবল মুক্ত-মূলক শৃঙ্খল বিক্রিয়ার মাধ্যমে ঘটে
Show answer & solution
Correct answer: (B) The repeating unit of polythene has the same composition as ethene, whereas the repeating unit of nylon 6,6 is lighter than the sum of its two monomers by two H2O molecules
In addition polymerisation nothing is lost, so -CH2-CH2- equals C2H4; hexamethylenediamine (C6H16N2) + adipic acid (C6H10O4) = C12H26N2O4, while the nylon 6,6 unit is C12H22N2O2, a difference of 2 H2O.যুত পলিমারকরণে কোনো অণু অপসারিত হয় না, তাই -CH2-CH2- এর সংযুতি C2H4-এর সমান; হেক্সামিথিলিন ডাইঅ্যামিন (C6H16N2) + অ্যাডিপিক অ্যাসিড (C6H10O4) = C12H26N2O4, অথচ নাইলন 6,6 একক C12H22N2O2, পার্থক্য 2টি H2O। - Q11easyReport
Nylon 6,6 is obtained by condensation polymerisation of:
নাইলন 6,6 কোন যৌগগুলির ঘনীভবন পলিমারকরণে পাওয়া যায়?- APhenol and formaldehydeফেনল ও ফরম্যালডিহাইড
- BCaprolactamক্যাপ্রোল্যাকটাম
- CEthylene glycol and terephthalic acidইথিলিন গ্লাইকল ও টেরেপথ্যালিক অ্যাসিড
- DHexamethylenediamine and adipic acidহেক্সামিথিলিন ডাইঅ্যামিন ও অ্যাডিপিক অ্যাসিড
Show answer & solution
Correct answer: (D) Hexamethylenediamine and adipic acid
Nylon 6,6 is a polyamide formed from hexamethylenediamine and adipic acid, each containing six carbon atoms.নাইলন 6,6 হল একটি পলিঅ্যামাইড, যা হেক্সামিথিলিন ডাইঅ্যামিন ও অ্যাডিপিক অ্যাসিড থেকে তৈরি; প্রতিটি মনোমারে ছয়টি কার্বন পরমাণু থাকে। - Q12easyReport
Terylene (Dacron) is a polyester made from:
টেরিলিন (ডেক্রন) একটি পলিএস্টার, যা কোন যৌগগুলি থেকে তৈরি?- AHexamethylenediamine and adipic acidহেক্সামিথিলিন ডাইঅ্যামিন ও অ্যাডিপিক অ্যাসিড
- BCaprolactamক্যাপ্রোল্যাকটাম
- CEthylene glycol and terephthalic acidইথিলিন গ্লাইকল ও টেরেপথ্যালিক অ্যাসিড
- DGlycine and aminocaproic acidগ্লাইসিন ও অ্যামিনোক্যাপ্রোয়িক অ্যাসিড
Show answer & solution
Correct answer: (C) Ethylene glycol and terephthalic acid
Terylene is formed by condensation of ethylene glycol (a diol) and terephthalic acid (a dicarboxylic acid), producing ester linkages.ইথিলিন গ্লাইকল (ডাইঅল) ও টেরেপথ্যালিক অ্যাসিডের (ডাইকার্বক্সিলিক অ্যাসিড) ঘনীভবনে এস্টার বন্ধনযুক্ত টেরিলিন তৈরি হয়।
Want the full set? Practise all 20 Polymers (পলিমার) — Sem III questions →