Higher Secondary 2027 (WBCHSE) · রসায়নবিদ্যা
Haloalkanes and Haloarenes (হ্যালোঅ্যালকেন ও হ্যালোঅ্যারিন) — Sem III
20 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Haloalkanes and Haloarenes (হ্যালোঅ্যালকেন ও হ্যালোঅ্যারিন) — Sem III — quick revision notes
- C–X bond is polar (Cδ+–Xδ−). Bond length: C–F < C–Cl < C–Br < C–I, and bond strength runs the other way. Dipole moment order: CH3Cl > CH3F > CH3Br > CH3I.C–X বন্ধন ধ্রুবীয় (Cδ+–Xδ−)। বন্ধন দৈর্ঘ্য: C–F < C–Cl < C–Br < C–I, আর বন্ধন শক্তির ক্রম এর উল্টো। দ্বিমেরু ভ্রামকের ক্রম: CH3Cl > CH3F > CH3Br > CH3I।
- In haloarenes and vinyl halides the C–X bond has partial double-bond character because of resonance, and the carbon is sp2. So the bond is shorter and stronger than in haloalkanes.হ্যালোঅ্যারিন ও ভিনাইল হ্যালাইডে অনুনাদের জন্য C–X বন্ধনে আংশিক দ্বিবন্ধন বৈশিষ্ট্য থাকে, আর কার্বনটি sp2 সংকরিত। তাই বন্ধনটি হ্যালোঅ্যালকেনের তুলনায় ছোট ও বেশি শক্তিশালী।
- Carbocation stability: 3° > 2° > 1° > CH3+ (because of the +I effect and hyperconjugation of alkyl groups). Benzylic and allylic carbocations are stabilised by resonance.কার্বোক্যাটায়নের স্থায়িত্ব: 3° > 2° > 1° > CH3+ (অ্যালকাইল গ্রুপের +I প্রভাব ও হাইপারকনজুগেশনের জন্য)। বেনজাইলিক ও অ্যালাইলিক কার্বোক্যাটায়ন অনুনাদের ফলে স্থিতিশীল।
- SN2: one step, rate = k[RX][Nu−] (second order), backside attack, inversion of configuration (Walden inversion). Reactivity: CH3X > 1° > 2° > 3°.SN2: একধাপে ঘটে, হার = k[RX][Nu−] (দ্বিতীয় ক্রম), নিউক্লিওফাইল পিছন দিক থেকে আক্রমণ করে, বিন্যাসের উৎক্রমণ (ওয়ালডেন উৎক্রমণ) ঘটে। সক্রিয়তা: CH3X > 1° > 2° > 3°।
- SN1: two steps through a carbocation, rate = k[RX] (first order). Reactivity: 3° > 2° > 1°. An optically active substrate gives mainly a racemic mixture (racemisation).SN1: কার্বোক্যাটায়নের মাধ্যমে দুই ধাপে ঘটে, হার = k[RX] (প্রথম ক্রম)। সক্রিয়তা: 3° > 2° > 1°। আলোক সক্রিয় বিক্রিয়ক থেকে মূলত রেসিমিক মিশ্রণ পাওয়া যায় (রেসিমাইজেশন)।
- R/S (CIP rules): rank groups by atomic number (e.g. Br > Cl > F > H). Look with the lowest-priority group pointing away from you: clockwise = R, anticlockwise = S. If that group points towards you, reverse the answer. D/L gives relative configuration compared with glyceraldehyde and has no fixed link to the sign of rotation.R/S (CIP নিয়ম): পারমাণবিক সংখ্যা অনুযায়ী গ্রুপগুলির অগ্রাধিকার ঠিক করো (যেমন Br > Cl > F > H)। সর্বনিম্ন অগ্রাধিকারের গ্রুপটি দর্শকের থেকে দূরে রেখে দেখো: দক্ষিণাবর্ত হলে R, বামাবর্ত হলে S। ওই গ্রুপটি দর্শকের দিকে থাকলে উত্তর উল্টে দিতে হবে। D/L পদ্ধতি গ্লিসার্যালডিহাইডের সঙ্গে তুলনা করে আপেক্ষিক বিন্যাস বোঝায়, ঘূর্ণনের চিহ্নের সঙ্গে এর কোনো নির্দিষ্ট সম্পর্ক নেই।
- Halogen on a benzene ring: the −I effect makes the ring less reactive (deactivating), while the +R effect makes the ortho and para positions richer in electrons, so halogen is ortho/para directing. The para product is major because of steric hindrance at the ortho position.বেঞ্জিন বলয়ে হ্যালোজেন: −I প্রভাবে বলয়ের সক্রিয়তা কমে (সক্রিয়তা হ্রাসকারী), কিন্তু +R প্রভাবে অর্থো ও প্যারা অবস্থানে ইলেকট্রন ঘনত্ব বাড়ে, তাই হ্যালোজেন অর্থো/প্যারা নির্দেশক। অর্থো অবস্থানে স্টেরিক বাধার জন্য প্যারা যৌগটিই প্রধান উৎপাদ।
- Uses and hazards: CH2Cl2 is a solvent and paint remover that harms the central nervous system. CHCl3 is a solvent and was an old anaesthetic; in light and air it oxidises to poisonous phosgene (COCl2). CCl4 is a solvent, was used in fire extinguishers, causes liver damage and depletes ozone. Iodoform (CHI3) is an antiseptic because it releases free iodine. Freons (e.g. CCl2F2, freon-12) destroy the ozone layer. DDT is a non-biodegradable insecticide that builds up in fatty tissue.ব্যবহার ও ক্ষতি: CH2Cl2 দ্রাবক ও রং অপসারক, এটি কেন্দ্রীয় স্নায়ুতন্ত্রের ক্ষতি করে। CHCl3 দ্রাবক, আগে অ্যানাস্থেটিক হিসেবে ব্যবহৃত হত; আলো ও বাতাসে জারিত হয়ে বিষাক্ত ফসজিন (COCl2) তৈরি করে। CCl4 দ্রাবক, আগে অগ্নিনির্বাপক যন্ত্রে ব্যবহৃত হত, যকৃতের ক্ষতি করে ও ওজোন স্তর ক্ষয় করে। আয়োডোফর্ম (CHI3) মুক্ত আয়োডিন ছাড়ে বলে জীবাণুনাশক। ফ্রেয়ন (যেমন CCl2F2, ফ্রেয়ন-12) ওজোন স্তর ধ্বংস করে। DDT জৈব-অবিয়োজ্য কীটনাশক, যা প্রাণীদেহের চর্বি কলায় জমা হয়।
Common mistakes to avoid
- CH3F does not have the largest dipole moment even though F is the most electronegative. The very short C–F bond makes CH3Cl the highest.
- D/L is not the same as d/l or (+)/(−). A D-compound can be laevorotatory, and D/L does not always match R/S.
- Halogens are ortho/para directing but deactivating. Do not mix them up with activating o/p directors like –OH or –CH3.
- Iodoform's antiseptic action comes from the free iodine it releases, not from iodoform itself.
Haloalkanes and Haloarenes (হ্যালোঅ্যালকেন ও হ্যালোঅ্যারিন) — Sem III — solved practice questions
12 WB HS Chemistry (রসায়নবিদ্যা) questions with step-by-step solutions. Attempt each, then reveal the answer.
Take the timed test first
These questions are in the test, so try it before you read the answers below.
- Q1easyReport
What is the IUPAC name of (CH3)2CHCH2Cl?
(CH3)2CHCH2Cl-এর IUPAC নাম কী?- A1-Chloro-2,2-dimethylethane1-ক্লোরো-2,2-ডাইমিথাইলইথেন
- B1-Chlorobutane1-ক্লোরোবিউটেন
- C2-Chloro-2-methylpropane2-ক্লোরো-2-মিথাইলপ্রোপেন
- D1-Chloro-2-methylpropane1-ক্লোরো-2-মিথাইলপ্রোপেন
Show answer & solution
Correct answer: (D) 1-Chloro-2-methylpropane
The longest chain has three carbons. Numbering from the Cl end puts Cl on C-1 and the methyl group on C-2, and the prefixes are written in alphabetical order.দীর্ঘতম শৃঙ্খলে তিনটি কার্বন আছে। Cl-এর দিক থেকে গুনলে Cl থাকে C-1-এ আর মিথাইল গ্রুপ থাকে C-2-তে, এবং উপসর্গগুলি বর্ণানুক্রমে লেখা হয়। - Q2easyReport
Which carbon–halogen bond has the greatest bond length?
কোন কার্বন–হ্যালোজেন বন্ধনের দৈর্ঘ্য সবচেয়ে বেশি?- AC–IC–I
- BC–BrC–Br
- CC–FC–F
- DC–ClC–Cl
Show answer & solution
Correct answer: (A) C–I
Halogen atoms get bigger from F to I, so the C–X bond length increases in the order C–F < C–Cl < C–Br < C–I.F থেকে I পর্যন্ত হ্যালোজেন পরমাণুর আকার বাড়ে, তাই C–X বন্ধন দৈর্ঘ্য C–F < C–Cl < C–Br < C–I ক্রমে বাড়ে। - Q3easyReport
CH2=CH–Cl is an example of which type of halide?
CH2=CH–Cl কোন ধরনের হ্যালাইডের উদাহরণ?- AVinylic halideভিনাইলিক হ্যালাইড
- BSecondary alkyl halideসেকেন্ডারি অ্যালকাইল হ্যালাইড
- CBenzylic halideবেনজাইলিক হ্যালাইড
- DAllylic halideঅ্যালাইলিক হ্যালাইড
Show answer & solution
Correct answer: (A) Vinylic halide
In vinylic halides the halogen is attached directly to an sp2 carbon of a C=C double bond, which is the case in CH2=CH–Cl.ভিনাইলিক হ্যালাইডে হ্যালোজেন সরাসরি C=C দ্বিবন্ধনের একটি sp2 কার্বনের সঙ্গে যুক্ত থাকে; CH2=CH–Cl-এ ঠিক তাই ঘটেছে। - Q4hardReport
Among the methyl halides, which has the highest dipole moment?
মিথাইল হ্যালাইডগুলির মধ্যে কোনটির দ্বিমেরু ভ্রামক সবচেয়ে বেশি?- ACH3FCH3F
- BCH3BrCH3Br
- CCH3ICH3I
- DCH3ClCH3Cl
Show answer & solution
Correct answer: (D) CH3Cl
Dipole moment depends on both the charge separation and the bond length. F is more electronegative, but the C–F bond is much shorter, so CH3Cl (about 1.86 D) is slightly higher than CH3F.দ্বিমেরু ভ্রামক আধানের পৃথকীকরণ এবং বন্ধন দৈর্ঘ্য দুটোর উপরেই নির্ভর করে। F বেশি তড়িৎঋণাত্মক হলেও C–F বন্ধন অনেক ছোট, তাই CH3Cl-এর (প্রায় 1.86 D) মান CH3F-এর চেয়ে সামান্য বেশি। - Q5mediumReport
Why is the C–Cl bond in chlorobenzene shorter and stronger than the C–Cl bond in chloromethane?
ক্লোরোবেঞ্জিনের C–Cl বন্ধন ক্লোরোমিথেনের C–Cl বন্ধনের চেয়ে ছোট ও বেশি শক্তিশালী কেন?- AResonance gives the C–Cl bond partial double-bond characterঅনুনাদের ফলে C–Cl বন্ধনে আংশিক দ্বিবন্ধন বৈশিষ্ট্য আসে
- BThe C–Cl bond in chlorobenzene is ionicক্লোরোবেঞ্জিনের C–Cl বন্ধনটি আয়নীয়
- CThe ring carbon in chlorobenzene is sp3 hybridisedক্লোরোবেঞ্জিনের বলয়ের কার্বনটি sp3 সংকরিত
- DChlorine is less electronegative than carbonক্লোরিন কার্বনের চেয়ে কম তড়িৎঋণাত্মক
Show answer & solution
Correct answer: (A) Resonance gives the C–Cl bond partial double-bond character
A lone pair on Cl takes part in resonance with the benzene ring, which gives the C–Cl bond partial double-bond character. The ring carbon is also sp2, so the bond is shorter and harder to break.Cl-এর একটি নিঃসঙ্গ ইলেকট্রন জোড় বেঞ্জিন বলয়ের সঙ্গে অনুনাদে অংশ নেয়, ফলে C–Cl বন্ধনে আংশিক দ্বিবন্ধন বৈশিষ্ট্য আসে। বলয়ের কার্বনটিও sp2 সংকরিত, তাই বন্ধনটি ছোট এবং ভাঙা কঠিন। - Q6easyReport
What is the correct order of stability of carbocations?
কার্বোক্যাটায়নের স্থায়িত্বের সঠিক ক্রম কোনটি?- A2° > 3° > 1° > CH3+2° > 3° > 1° > CH3+
- B3° > 2° > 1° > CH3+3° > 2° > 1° > CH3+
- C1° > 2° > 3° > CH3+1° > 2° > 3° > CH3+
- DCH3+ > 1° > 2° > 3°CH3+ > 1° > 2° > 3°
Show answer & solution
Correct answer: (B) 3° > 2° > 1° > CH3+
More alkyl groups on the positive carbon give more +I effect and hyperconjugation, which spread out the positive charge. So a 3° carbocation is the most stable.ধনাত্মক কার্বনে যত বেশি অ্যালকাইল গ্রুপ থাকে, তত বেশি +I প্রভাব ও হাইপারকনজুগেশন হয়, যা ধনাত্মক আধানকে ছড়িয়ে দেয়। তাই 3° কার্বোক্যাটায়ন সবচেয়ে স্থিতিশীল। - Q7mediumReport
Which alkyl bromide reacts fastest with OH− by the SN2 mechanism?
SN2 কৌশলে OH−-এর সঙ্গে কোন অ্যালকাইল ব্রোমাইড সবচেয়ে দ্রুত বিক্রিয়া করে?- ACH3CH2BrCH3CH2Br
- BCH3BrCH3Br
- C(CH3)2CHBr(CH3)2CHBr
- D(CH3)3CBr(CH3)3CBr
Show answer & solution
Correct answer: (B) CH3Br
In SN2 the nucleophile attacks from the back of the carbon. CH3Br has the least steric hindrance, so its reactivity is highest (CH3X > 1° > 2° > 3°).SN2 বিক্রিয়ায় নিউক্লিওফাইল কার্বনের পিছন দিক থেকে আক্রমণ করে। CH3Br-এ স্টেরিক বাধা সবচেয়ে কম, তাই এর সক্রিয়তা সবচেয়ে বেশি (CH3X > 1° > 2° > 3°)। - Q8mediumReport
When an optically active alkyl halide undergoes hydrolysis by the SN1 mechanism, the product is mainly:
একটি আলোক সক্রিয় অ্যালকাইল হ্যালাইড SN1 কৌশলে আর্দ্রবিশ্লেষিত হলে মূলত কী পাওয়া যায়?- AOnly the product with inverted configurationকেবল উৎক্রমিত বিন্যাসের উৎপাদ
- BOnly the product with retained configurationকেবল অপরিবর্তিত বিন্যাসের উৎপাদ
- CA racemic mixtureরেসিমিক মিশ্রণ
- DAn alkene onlyকেবল একটি অ্যালকিন
Show answer & solution
Correct answer: (C) A racemic mixture
SN1 goes through a planar carbocation, which the nucleophile can attack from either face. Both enantiomers form, so the product is mainly racemic (racemisation).SN1 বিক্রিয়া একটি সমতলীয় কার্বোক্যাটায়নের মাধ্যমে ঘটে, যাকে নিউক্লিওফাইল যেকোনো দিক থেকে আক্রমণ করতে পারে। দুটি এনানসিওমারই তৈরি হয়, তাই উৎপাদ মূলত রেসিমিক মিশ্রণ (রেসিমাইজেশন)। - Q9mediumReport
The rate of an SN1 reaction depends on the concentration of:
SN1 বিক্রিয়ার হার কীসের গাঢ়ত্বের উপর নির্ভর করে?- AThe alkyl halide onlyকেবল অ্যালকাইল হ্যালাইডের
- BNeither the alkyl halide nor the nucleophileঅ্যালকাইল হ্যালাইড বা নিউক্লিওফাইল কোনোটিরই নয়
- CThe nucleophile onlyকেবল নিউক্লিওফাইলের
- DBoth the alkyl halide and the nucleophileঅ্যালকাইল হ্যালাইড ও নিউক্লিওফাইল দুটোরই
Show answer & solution
Correct answer: (A) The alkyl halide only
The slow, rate-determining step of SN1 is the ionisation of R–X into a carbocation. So rate = k[RX], a first-order reaction.SN1-এর ধীর, হার-নির্ধারক ধাপটি হল R–X-এর আয়নিত হয়ে কার্বোক্যাটায়ন তৈরি হওয়া। তাই হার = k[RX], অর্থাৎ বিক্রিয়াটি প্রথম ক্রমের। - Q10mediumReport
According to the CIP sequence rules, what is the priority order of the groups in bromochlorofluoromethane (CHBrClF)?
CIP অনুক্রম নিয়ম অনুযায়ী ব্রোমোক্লোরোফ্লুরোমিথেনে (CHBrClF) গ্রুপগুলির অগ্রাধিকারের ক্রম কী?- AF > Cl > Br > HF > Cl > Br > H
- BH > F > Cl > BrH > F > Cl > Br
- CCl > Br > F > HCl > Br > F > H
- DBr > Cl > F > HBr > Cl > F > H
Show answer & solution
Correct answer: (D) Br > Cl > F > H
CIP priority is decided by the atomic number of the attached atom, not by electronegativity: Br (35) > Cl (17) > F (9) > H (1).CIP অগ্রাধিকার যুক্ত পরমাণুর পারমাণবিক সংখ্যা দিয়ে ঠিক হয়, তড়িৎঋণাত্মকতা দিয়ে নয়: Br (35) > Cl (17) > F (9) > H (1)। - Q11hardReport
For a chiral carbon, the lowest-priority group points towards the viewer, and the path 1 → 2 → 3 of the other groups looks clockwise. What is the configuration?
একটি কাইরাল কার্বনের সর্বনিম্ন অগ্রাধিকারের গ্রুপটি দর্শকের দিকে আছে, আর বাকি গ্রুপগুলির 1 → 2 → 3 পথটি দক্ষিণাবর্ত দেখাচ্ছে। বিন্যাসটি কী?- ARR
- BSS
- CRacemicরেসিমিক
- DIt cannot be decidedনির্ণয় করা যায় না
Show answer & solution
Correct answer: (B) S
The rule (clockwise = R) applies only when the lowest-priority group points away from the viewer. Here it points towards the viewer, so the answer is reversed and the configuration is S.দক্ষিণাবর্ত = R নিয়মটি তখনই খাটে যখন সর্বনিম্ন অগ্রাধিকারের গ্রুপটি দর্শকের থেকে দূরে থাকে। এখানে সেটি দর্শকের দিকে আছে, তাই উত্তর উল্টে যায় এবং বিন্যাসটি S। - Q12hardReport
Which statement about D/L configuration is correct?
D/L বিন্যাস সম্পর্কে কোন বিবৃতিটি সঠিক?- AA D-configuration always corresponds to an R-configurationD-বিন্যাস সবসময় R-বিন্যাসের সঙ্গে মেলে
- BAll D-compounds are dextrorotatoryসব D-যৌগই দক্ষিণাবর্তী (ডেক্সট্রোরোটেটরি)
- CL-glyceraldehyde is dextrorotatoryL-গ্লিসার্যালডিহাইড দক্ষিণাবর্তী
- DThe sign of optical rotation (+ or −) cannot be predicted from the D/L labelD/L চিহ্ন দেখে আলোক ঘূর্ণনের চিহ্ন (+ বা −) অনুমান করা যায় না
Show answer & solution
Correct answer: (D) The sign of optical rotation (+ or −) cannot be predicted from the D/L label
D/L gives relative configuration by comparison with glyceraldehyde. The sign of rotation must be measured experimentally, so a D-compound can be (+) or (−). L-glyceraldehyde is (−).D/L পদ্ধতি গ্লিসার্যালডিহাইডের সঙ্গে তুলনা করে আপেক্ষিক বিন্যাস বোঝায়। ঘূর্ণনের চিহ্ন পরীক্ষা করে মাপতে হয়, তাই একটি D-যৌগ (+) বা (−) যেকোনোটি হতে পারে। L-গ্লিসার্যালডিহাইড (−) অর্থাৎ বামাবর্তী।
Want the full set? Practise all 20 Haloalkanes and Haloarenes (হ্যালোঅ্যালকেন ও হ্যালোঅ্যারিন) — Sem III questions →