UPSC Civil Services · CSAT (GS Paper II)

Data Interpretation and Data Sufficiency (Set 2)

24 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
12
medium
4
hard

Data Interpretation and Data Sufficiency (Set 2) — quick revision notes

Data Interpretation in UPSC CSAT gives a small table, bar chart or line graph and asks for percentage changes, shares, ratios and averages worked out from it. Data Sufficiency questions ask whether the given statements are enough to answer a question. You do not have to find the answer itself. Most items use only Class 10 arithmetic, so speed comes from reading the data carefully and approximating sensibly.
  • Percentage change = (New - Old) / Old x 100; always divide by the earlier (base) value, not the later one.
  • Percentage share of an item = Item / Total x 100; add up the total once and reuse it for every share question on the same data.
  • A larger absolute increase does not mean a larger percentage increase; compare the change relative to each base.
  • An overall rate for several years taken together (total qualified / total appeared) is generally not the same as the simple average of the yearly rates.
  • Weighted average = sum of (value x weight) / sum of weights; use it whenever quantities differ between periods or groups.
  • Ratios such as 304 : 250 should be reduced by the HCF (here 2, giving 152 : 125) before you match them with the options.
  • When two ratios are linked through a common quantity, give that quantity a convenient value (such as 100) and work out every figure from it.
  • In Data Sufficiency, test each statement alone first, then together; a statement is sufficient only if it gives one unique answer.
  • Two statements that each give a different equation in the same unknown can each be sufficient alone. Check both before you choose 'both needed'.

Common mistakes to avoid

  • Dividing by the new value instead of the base value when finding a percentage decrease (for example 5/16 instead of 5/21).
  • Averaging percentages directly when the bases differ, instead of working with the actual totals.
  • In Data Sufficiency, actually solving the problem fully and then picking the option by the answer, rather than checking whether each statement alone gives a unique value.
  • Treating a negative change (a fall) as an increase when ranking percentage growth.
Exam tip: Before solving, write down the column totals and the base values you will need, then approximate: CSAT options are usually far enough apart that rounding to the nearest whole number is safe. In Data Sufficiency, stop as soon as you know the answer is unique, because you never need to finish the calculation.

Data Interpretation and Data Sufficiency (Set 2) — solved practice questions

6 UPSC CSAT (GS Paper II) questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    Electricity consumption (in million units) of four hypothetical cities is given below.

    City20222023
    P400460
    Q250300
    R500525
    S320304

    Which city recorded the highest percentage increase in consumption from 2022 to 2023?

    • AQ
    • BR
    • CS
    • DP
    Show answer & solution

    Correct answer: (A) Q

    Percentage changes: P = 60/400 = 15%, Q = 50/250 = 20%, R = 25/500 = 5%, S = -16/320 = -5% (a fall). Q has the highest percentage increase, even though P has the larger absolute rise.
  2. Q2easyReport

    Electricity consumption (in million units) of four hypothetical cities is given below.

    City20222023
    P400460
    Q250300
    R500525
    S320304

    By how many million units did the total consumption of the four cities in 2023 exceed that in 2022?

    • A109
    • B99
    • C89
    • D119
    Show answer & solution

    Correct answer: (D) 119

    Total for 2022 = 400 + 250 + 500 + 320 = 1470. Total for 2023 = 460 + 300 + 525 + 304 = 1589. Difference = 1589 - 1470 = 119 million units.
  3. Q3mediumReport

    Electricity consumption (in million units) of four hypothetical cities is given below.

    City20222023
    P400460
    Q250300
    R500525
    S320304

    City R's share in the total consumption of the four cities in 2023 is closest to:

    • A35%
    • B33%
    • C31%
    • D29%
    Show answer & solution

    Correct answer: (B) 33%

    Total for 2023 = 1589 million units. R's share = 525/1589 × 100, which is about 33.0% (since 1589 × 0.33 = 524.4).
  4. Q4mediumReport

    Electricity consumption (in million units) of four hypothetical cities is given below.

    City20222023
    P400460
    Q250300
    R500525
    S320304

    What is the ratio of city S's consumption in 2023 to city Q's consumption in 2022?

    • A6 : 5
    • B19 : 15
    • C152 : 125
    • D76 : 65
    Show answer & solution

    Correct answer: (C) 152 : 125

    S in 2023 = 304 and Q in 2022 = 250. The ratio 304 : 250, divided by the HCF 2, gives 152 : 125. None of the other ratios equals 1.216.
  5. Q5easyReport

    The number of candidates (in hundreds) who appeared in and qualified a hypothetical recruitment test is given below.

    YearAppearedQualified
    20194012
    2020459
    20215015
    20226021
    20236416

    In which year was the percentage of candidates qualifying (out of those who appeared) the highest?

    • A2023
    • B2022
    • C2021
    • D2019
    Show answer & solution

    Correct answer: (B) 2022

    Pass percentages: 2019 = 12/40 = 30%, 2020 = 9/45 = 20%, 2021 = 15/50 = 30%, 2022 = 21/60 = 35%, 2023 = 16/64 = 25%. The highest is 35%, in 2022.
  6. Q6mediumReport

    The number of candidates (in hundreds) who appeared in and qualified a hypothetical recruitment test is given below.

    YearAppearedQualified
    20194012
    2020459
    20215015
    20226021
    20236416

    Taking all five years together, what percentage of the candidates who appeared qualified (correct to one decimal place)?

    • A28.0%
    • B30.1%
    • C29.0%
    • D28.2%
    Show answer & solution

    Correct answer: (D) 28.2%

    Total qualified = 12 + 9 + 15 + 21 + 16 = 73. Total appeared = 40 + 45 + 50 + 60 + 64 = 259. Overall percentage = 73/259 × 100, which is about 28.2%. The simple average of the yearly percentages, 28.0%, is a trap because the yearly bases differ.

Ready to test yourself? Take the 18-question Data Interpretation and Data Sufficiency (Set 2) test →