NEET (Medical) · Chemistry

p-Block Elements (Groups 13 to 18)

24 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

6
easy
12
medium
6
hard

p-Block Elements (Groups 13 to 18) — quick revision notes

For NEET UG 2026, this unit covers only Groups 13 to 18 at the level of general introduction, electronic configuration (ns2np1 to ns2np6), periodic trends in physical and chemical properties, and the unique behaviour of the first element of each group. Questions on specific compounds and their preparation, reactions or industrial processes are outside the 2026 syllabus. Focus on trends, the reasons behind them, and NCERT data.
  • Atomic radius generally increases down each group. Exception: Ga (135 pm) is smaller than Al (143 pm) because the 3d electrons shield poorly. Group 13 IE1 is irregular (NCERT: B 801, Al 577, Ga 579, In 558, Tl 589 kJ/mol).
  • Inert pair effect: down Groups 13 to 16, the oxidation state two below the group maximum becomes more stable (Tl(I), Pb(II), Bi(III), Po(IV)). So Sn(II) acts as a reducing agent and Pb(IV) as an oxidising agent.
  • Metallic character rises down each group. Group 14: C and Si non-metals, Ge metalloid, Sn and Pb soft metals (NCERT). Group 15: N and P non-metals, As and Sb metalloids, Bi metal. Group 16: O and S non-metals, Se and Te metalloids, Po metal.
  • Oxides become more basic down a group: B2O3 acidic, Al2O3/Ga2O3 amphoteric, In2O3/Tl2O3 basic. CO2/SiO2/GeO2 are acidic, SnO2/PbO2 amphoteric, and CO is neutral.
  • First elements (B, C, N, O, F) behave unusually: small size, high electronegativity, no d orbitals (maximum covalency 4), and the ability to form pπ–pπ multiple bonds (C=C, C=O, N≡N, O=O). This is why N2 is diatomic while P is P4, and why CO2 is a gas while SiO2 is a network solid.
  • Catenation order is C >> Si > Ge ≈ Sn, and Pb does not catenate. The N–N single bond is weaker than the P–P single bond because the short bond brings lone pairs close and they repel strongly.
  • Hydrides down Groups 15 and 16: thermal stability falls and reducing character rises. Bond angles in Group 15 hydrides: NH3 107.8° > PH3 93.6° > AsH3 91.8° > SbH3 91.3°. HX boiling points: HCl < HBr < HI < HF (H-bonding in HF).
  • Halogens: F shows only −1. F2 is the strongest oxidant because of low F–F dissociation enthalpy and high F- hydration enthalpy. Noble gases have the highest IE in each period (He highest overall) and positive electron gain enthalpies, and their boiling points rise from He (4.2 K, the lowest of any substance) to Rn.

Common mistakes to avoid

  • Cl, not F, has the most negative electron gain enthalpy, yet F2 is the stronger oxidising agent. Do not mix up electron gain enthalpy with oxidising power.
  • Ga < Al in atomic radius, and In (not Tl) has the lowest IE1 in Group 13. Do not assume a smooth trend in Group 13.
  • Nitrogen DOES show +5 (as in N2O5). It cannot form NCl5 because its covalency is capped at 4, not because +5 is impossible.
  • HF has the HIGHEST boiling point among the hydrogen halides (hydrogen bonding), but among the other three the order rises with size: HCl < HBr < HI.
Exam tip: For each trend question, ask two things: what does size or shielding do down the group, and is the first element anomalous (small size, no d orbitals, pπ–pπ bonding)? Learn the few NCERT exceptions (Ga radius, Group 13 IE, HF boiling point, F vs Cl electron gain enthalpy) because most trap options are built on them.

p-Block Elements (Groups 13 to 18) — solved practice questions

6 NEET Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    The atomic radius of gallium (135 pm) is slightly less than that of aluminium (143 pm), even though gallium lies below aluminium in Group 13. The main reason is:

    • AInert pair effect of the 4s electrons
    • BPresence of vacant 4d orbitals in gallium
    • CLanthanoid contraction
    • DPoor shielding of the nucleus by the intervening 3d electrons in gallium
    Show answer & solution

    Correct answer: (D) Poor shielding of the nucleus by the intervening 3d electrons in gallium

    Gallium has ten 3d electrons, and these shield the outer electrons poorly. The higher effective nuclear charge pulls the electrons in, so Ga ends up slightly smaller than Al. Lanthanoid contraction only matters from the 6th period onwards.
  2. Q2hardReport

    According to NCERT data for the first ionisation enthalpy of Group 13 elements, which of the following has the LOWEST value?

    • AAluminium
    • BThallium
    • CGallium
    • DIndium
    Show answer & solution

    Correct answer: (D) Indium

    NCERT values (kJ/mol): B 801, Al 577, Ga 579, In 558, Tl 589. Indium has the lowest value. The trend is irregular because d and f electrons shield the nucleus poorly.
  3. Q3mediumReport

    Match the Group 13 oxides in Column I with their nature in Column II. Column I: (a) B2O3 (b) Al2O3 (c) In2O3 Column II: (i) Basic (ii) Acidic (iii) Amphoteric

    • Aa-ii, b-i, c-iii
    • Ba-iii, b-ii, c-i
    • Ca-ii, b-iii, c-i
    • Da-i, b-ii, c-iii
    Show answer & solution

    Correct answer: (C) a-ii, b-iii, c-i

    Down Group 13, the oxides become more basic as metallic character increases. B2O3 is acidic, Al2O3 and Ga2O3 are amphoteric, and In2O3 and Tl2O3 are basic.
  4. Q4easyReport

    Which of the following oxides of Group 14 elements is neutral?

    • AGeO2
    • BCO
    • CSiO2
    • DSnO2
    Show answer & solution

    Correct answer: (B) CO

    CO is a neutral oxide. CO2, SiO2 and GeO2 are acidic, while SnO2 and PbO2 are amphoteric.
  5. Q5mediumReport

    The correct order of the tendency to show catenation among Group 14 elements is:

    • ASi > C > Ge > Sn
    • BC > Si > Ge ≈ Sn
    • CSn > Ge > Si > C
    • DC > Ge > Si > Sn
    Show answer & solution

    Correct answer: (B) C > Si > Ge ≈ Sn

    Catenation follows element–element bond enthalpy: C–C 348, Si–Si 297, Ge–Ge 260, Sn–Sn 240 kJ/mol. This gives C >> Si > Ge ≈ Sn. Lead does not show catenation.
  6. Q6mediumReport

    Statement I: In Group 14, the stability of the +2 oxidation state increases down the group, so Pb(II) is more stable than Pb(IV). Statement II: Tin in the +2 state acts as a reducing agent, whereas lead compounds in the +4 state act as oxidising agents.

    • ABoth Statement I and Statement II are correct
    • BBoth Statement I and Statement II are incorrect
    • CStatement I is correct but Statement II is incorrect
    • DStatement I is incorrect but Statement II is correct
    Show answer & solution

    Correct answer: (A) Both Statement I and Statement II are correct

    The inert pair effect makes the +2 state more stable down the group. Sn(II) therefore tends to rise to Sn(IV) and acts as a reducing agent, while Pb(IV) tends to fall to Pb(II) and acts as an oxidising agent.

Ready to test yourself? Take the 18-question p-Block Elements (Groups 13 to 18) test →