JEE (Main + Adv) · Chemistry

Principles Related to Practical Chemistry

26 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

9
easy
11
medium
6
hard

Principles Related to Practical Chemistry — quick revision notes

This chapter covers detecting N, S, halogens and P (Lassaigne's test), tests for functional groups (unsaturation, alcohols, phenols, carbonyls, acids, amines), and the chemistry behind preparing Mohr's salt, potash alum, acetanilide, p-nitroacetanilide, aniline yellow and iodoform. It also covers redox and acid–base titrations, cation and anion salt analysis, enthalpy and kinetics experiments, and sols. JEE Main asks one or two direct questions on colours, reagents, the formula of the coloured species, or a short titration numerical.
  • Lassaigne's test: N gives Prussian blue Fe₄[Fe(CN)₆]₃. S gives a violet Na₄[Fe(CN)₅NOS] with nitroprusside, or black PbS. N + S together give blood-red [Fe(SCN)]²⁺. Halogens: boil with HNO₃ first, then AgNO₃ gives AgCl (white, readily soluble in NH₃), AgBr (pale yellow, sparingly soluble, dissolves only in conc. NH₃) or AgI (yellow, insoluble in NH₃). P gives yellow (NH₄)₃PO₄·12MoO₃.
  • Functional groups: Baeyer's test gives brown MnO₂. Ceric ammonium nitrate gives red with alcohols. Neutral FeCl₃ gives violet with phenols. NaHCO₃ gives CO₂ with –COOH. 2,4-DNP gives a yellow-orange precipitate (2,4-dinitrophenylhydrazone) with aldehydes and ketones only, not with –COOH, esters or amides. Tollens' is positive for aldehydes, HCOOH and α-hydroxy ketones. Fehling's is negative for aromatic aldehydes. Iodoform needs CH₃CO– or CH₃CH(OH)–.
  • Amines: the carbylamine test is given only by 1° amines. The azo-dye test (0–5 °C, β-naphthol) is given only by aromatic 1° amines and produces an orange-red dye.
  • Preparations: Mohr's salt is FeSO₄·(NH₄)₂SO₄·6H₂O (dilute H₂SO₄ stops hydrolysis). Potash alum is K₂SO₄·Al₂(SO₄)₃·24H₂O. Acetanilide is made from aniline and acetic anhydride, and its nitration gives the p-isomer. Aniline yellow is p-aminoazobenzene.
  • Redox titrations: in acid, MnO₄⁻ → Mn²⁺ (n = 5). The ratio is 2MnO₄⁻ : 5C₂O₄²⁻, or 1MnO₄⁻ : 5Fe²⁺. Use H₂SO₄, never HCl or HNO₃. Heat oxalic acid to 60–70 °C. KMnO₄ is its own indicator, and the end point is colourless to light pink. N₁V₁ = N₂V₂.
  • Indicators: strong acid–strong base can use either. Weak acid–strong base uses phenolphthalein (8.3–10). Strong acid–weak base uses methyl orange (3.1–4.4).
  • Group reagents: I is dilute HCl (Pb²⁺). II is H₂S in dilute HCl (Cu²⁺, Pb²⁺). III is NH₄Cl + NH₄OH (Fe³⁺, Al³⁺), with conc. HNO₃ first to oxidise Fe²⁺. IV is H₂S in ammoniacal medium (Zn²⁺ white, Ni²⁺ black). V is (NH₄)₂CO₃ (Ca²⁺, Ba²⁺). VI is Mg²⁺. Zero group is NH₄⁺ (Nessler's reagent gives brown).
  • Anions: the brown ring is [Fe(H₂O)₅NO]²⁺, with Fe at +1 by the NCERT convention. The chromyl chloride test (Cl⁻ only) goes CrO₂Cl₂ → Na₂CrO₄ → yellow PbCrO₄. ΔH(neutralisation) for strong acid with strong base is −57.1 kJ mol⁻¹, and it is smaller in magnitude for weak acids or bases.

Common mistakes to avoid

  • Using only the acid volume as the solution mass in calorimetry. The total mass is acid plus base, for example 200 g.
  • Mixing up the group II and group IV conditions. Acidic H₂S gives a low [S²⁻], so only CuS and PbS precipitate. Ammoniacal H₂S gives a high [S²⁻], so ZnS and NiS also precipitate.
  • Assuming benzaldehyde gives Fehling's test, or that every ketone fails Tollens'. α-Hydroxy ketones such as fructose do give Tollens' test.
  • Thinking NH₄Cl is added in group III to oxidise iron or raise [OH⁻]. It lowers [OH⁻] by the common-ion effect.
Exam tip: Make a one-page table of ion → reagent → colour/formula and revise it before the exam; most practical-chemistry questions are direct recall. For titrations, always balance the electron counts (n = 5 for MnO₄⁻, 2 for C₂O₄²⁻, 1 for Fe²⁺) before using N₁V₁ = N₂V₂.

Principles Related to Practical Chemistry — solved practice questions

7 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    In Lassaigne's test for nitrogen, the Prussian blue colour is due to the formation of:

    • ANa₄[Fe(CN)₆]
    • BK₄[Fe(CN)₆]
    • CFe₄[Fe(CN)₆]₃
    • DFe₃[Fe(CN)₆]₂
    Show answer & solution

    Correct answer: (C) Fe₄[Fe(CN)₆]₃

    NaCN in the extract forms Na₄[Fe(CN)₆] with FeSO₄. On acidification, Fe³⁺ (from partial oxidation of Fe²⁺) reacts with it to give ferric ferrocyanide, Fe₄[Fe(CN)₆]₃, which is Prussian blue.
  2. Q2mediumReport

    An organic compound contains both nitrogen and sulphur. When its sodium fusion extract (made with too little sodium) is treated with FeCl₃, the observation is:

    • ABlack precipitate of PbS
    • BBlood-red colour due to [Fe(SCN)]²⁺
    • CPrussian blue colour
    • DViolet colour
    Show answer & solution

    Correct answer: (B) Blood-red colour due to [Fe(SCN)]²⁺

    When there is too little sodium, N and S together form NaSCN instead of NaCN + Na₂S. Fe³⁺ + SCN⁻ → [Fe(SCN)]²⁺ gives a blood-red colour.
  3. Q3easyReport

    The violet colour in the sodium nitroprusside test for sulphur is due to:

    • ANa₄[Fe(CN)₅NOS]
    • BNa₂[Fe(CN)₅NO]
    • CNa₄[Fe(CN)₆]
    • DNa₃[Fe(CN)₅NO]
    Show answer & solution

    Correct answer: (A) Na₄[Fe(CN)₅NOS]

    Na₂S + Na₂[Fe(CN)₅NO] → Na₄[Fe(CN)₅NOS], which is violet. Na₂[Fe(CN)₅NO] is the reagent itself.
  4. Q4hardReport

    Before testing for halogens with AgNO₃, the Lassaigne's extract is boiled with concentrated HNO₃ in order to:

    • Adecompose NaCN and Na₂S, which would otherwise interfere
    • Bprecipitate silver as silver nitrate
    • Cconvert sodium carbonate into sodium nitrate
    • Doxidise the halide ions to free halogens
    Show answer & solution

    Correct answer: (A) decompose NaCN and Na₂S, which would otherwise interfere

    If N or S is present, NaCN and Na₂S would give AgCN (white) and Ag₂S (black) with AgNO₃. Boiling with HNO₃ drives off HCN and H₂S.
  5. Q5easyReport

    Phosphorus in an organic compound is detected by oxidising it to phosphate and then adding ammonium molybdate with HNO₃. The yellow precipitate is:

    • A(NH₄)₃PO₄·12MoO₃
    • B(NH₄)₂MoO₄
    • CMoO₃
    • DNa₃PO₄
    Show answer & solution

    Correct answer: (A) (NH₄)₃PO₄·12MoO₃

    Phosphate reacts with ammonium molybdate in nitric acid to give a yellow precipitate of ammonium phosphomolybdate, (NH₄)₃PO₄·12MoO₃.
  6. Q6easyReport

    Which reagent can distinguish benzoic acid from phenol?

    • AAqueous NaOH
    • BConcentrated H₂SO₄
    • CSodium metal
    • DAqueous NaHCO₃
    Show answer & solution

    Correct answer: (D) Aqueous NaHCO₃

    Carboxylic acids are stronger acids than H₂CO₃, so benzoic acid gives brisk effervescence of CO₂ with NaHCO₃. Phenol does not. Both compounds dissolve in NaOH and both give H₂ with Na.
  7. Q7mediumReport

    An alcohol is warmed with ceric ammonium nitrate solution. A positive test is indicated by:

    • Aa red colour
    • Ba silver mirror
    • Ca violet colour
    • Da yellow precipitate
    Show answer & solution

    Correct answer: (A) a red colour

    Alcohols replace a nitrate ligand of ceric ammonium nitrate and form a red cerium–alkoxide complex. A violet colour with neutral FeCl₃ is the test for phenols.

Ready to test yourself? Take the 19-question Principles Related to Practical Chemistry test →