JEE (Main + Adv) · Chemistry

Purification, Characterisation and Basic Principles of Organic Chemistry

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
15
medium
7
hard

Purification, Characterisation and Basic Principles of Organic Chemistry — quick revision notes

This chapter covers purification methods, qualitative analysis (Lassaigne's test), quantitative estimation of N, halogens and S, IUPAC naming, isomerism, and electronic effects with reaction intermediates. JEE Main usually asks numericals on Dumas, Kjeldahl or Carius, plus questions ranking acidity or the stability of carbocations and radicals.
  • Dumas: %N = (28 × V_STP / 22400) / w × 100; subtract aqueous tension to get the dry-gas pressure
  • Kjeldahl: %N = 1.4 × N(acid) × V(acid used, mL) / w; it does not work for nitro, azo or ring N (pyridine)
  • Carius: %X = (atomic mass of X / M of AgX) × m(AgX) / w × 100 (AgCl 143.5, AgBr 188, AgI 235); %S = (32/233) × m(BaSO4)/w × 100
  • Lassaigne: Prussian blue Fe4[Fe(CN)6]3 = N; violet with nitroprusside = S; blood red [Fe(SCN)]²⁺ = N + S together
  • Carbocation stability: (C6H5)3C⁺ > (C6H5)2CH⁺ > benzyl ≳ allyl ~ 3° > 2° > 1° > CH3⁺ (resonance-stabilised cations are comparable to or more stable than 3° alkyl); carbanions follow the reverse alkyl order
  • Hyperconjugation counts only α-H on sp³ carbons next to the cation, radical or double bond
  • Purification: sublimation (camphor, naphthalene), steam distillation (aniline, o-nitrophenol), reduced pressure (glycerol), fractional distillation (crude oil); Rf = distance of solute / distance of solvent front (< 1)

Common mistakes to avoid

  • Not subtracting aqueous tension in Dumas, or forgetting that H2SO4 is dibasic (normality = 2 × molarity) in Kjeldahl
  • Counting vinylic H as hyperconjugative α-H
  • Assuming halogens are −R: they are −I and +R. Because −I dominates, they deactivate the ring overall, but +R makes them ortho/para directing
  • Forgetting the meso form when counting stereoisomers of molecules with identical chiral centres
Exam tip: For estimation numericals, use the mass-ratio route (e.g. 80/188 for Br) and check with a mole-based route. Electronic-effect ranking questions are easiest when you look first at how stable the resulting ion is.

Purification, Characterisation and Basic Principles of Organic Chemistry — solved practice questions

8 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    What is the hybridisation of the three carbon atoms (C1, C2, C3) in allene, CH2=C=CH2?

    • Asp², sp, sp²
    • Bsp, sp, sp
    • Csp³, sp, sp³
    • Dsp², sp², sp²
    Show answer & solution

    Correct answer: (A) sp², sp, sp²

    The terminal carbons each have one double bond and are sp². The central carbon has two double bonds (two π bonds) and is sp.
  2. Q2mediumReport

    In Lassaigne's test for nitrogen, what causes the Prussian blue colour?

    • A[Fe(SCN)]²⁺
    • BNa2[Fe(CN)6]
    • CFe4[Fe(CN)6]3
    • DNa4[Fe(CN)5NOS]
    Show answer & solution

    Correct answer: (C) Fe4[Fe(CN)6]3

    NaCN formed in the fusion reacts with FeSO4 to give Na4[Fe(CN)6]. With Fe³⁺ in acid this gives ferric ferrocyanide, Fe4[Fe(CN)6]3·xH2O, which is Prussian blue.
  3. Q3mediumReport

    When a compound contains both N and S, the sodium fusion extract gives a blood-red colour with FeCl3. Which species causes this colour?

    • A[Fe(CN)5NOS]⁴⁻
    • BPbS
    • C[Fe(SCN)]²⁺
    • DFe4[Fe(CN)6]3
    Show answer & solution

    Correct answer: (C) [Fe(SCN)]²⁺

    With enough C, N and S, sodium thiocyanate (NaSCN) forms, and it gives blood-red [Fe(SCN)]²⁺ with Fe³⁺. The violet nitroprusside complex indicates S alone.
  4. Q4hardReport

    In Dumas' method, 0.30 g of an organic compound gave 50 mL of N2 collected over water at 300 K and 715 mm Hg. The aqueous tension at 300 K is 15 mm Hg. What is the percentage of nitrogen?

    • A14.29%
    • B17.46%
    • C20.10%
    • D8.73%
    Show answer & solution

    Correct answer: (B) 17.46%

    The dry-gas pressure is 715 − 15 = 700 mm. V(STP) = 50 × (700/760) × (273/300) ≈ 41.9 mL, so mass of N2 = 41.9 × 28/22400 ≈ 0.0524 g. %N = 0.0524/0.30 × 100 ≈ 17.46% (pV = nRT gives the same answer).
  5. Q5hardReport

    In Kjeldahl's method, the ammonia from 0.50 g of an organic compound exactly neutralised 10 mL of 1 M H2SO4. What is the percentage of nitrogen in the compound?

    • A56%
    • B14%
    • C42%
    • D28%
    Show answer & solution

    Correct answer: (A) 56%

    mol H2SO4 = 0.010, so mol NH3 = 0.020 and the mass of N = 0.28 g, which is 56%. Cross-check: %N = 1.4 × N × V / w = 1.4 × 2 × 10/0.5 = 56%.
  6. Q6mediumReport

    In the Carius method, 0.15 g of an organic compound gave 0.12 g of AgBr. What is the percentage of bromine? (Ag = 108, Br = 80)

    • A68.08%
    • B25.53%
    • C34.04%
    • D42.55%
    Show answer & solution

    Correct answer: (C) 34.04%

    The mass of Br = (80/188) × 0.12 = 0.05106 g. %Br = 0.05106/0.15 × 100 ≈ 34.04%.
  7. Q7hardReport

    In the Carius estimation of sulphur, 0.157 g of an organic compound gave 0.4813 g of BaSO4. What is the percentage of sulphur? (BaSO4 = 233 g mol⁻¹)

    • A42.10%
    • B30.66%
    • C13.73%
    • D21.05%
    Show answer & solution

    Correct answer: (A) 42.10%

    The mass of S = (32/233) × 0.4813 = 0.0661 g. %S = 0.0661/0.157 × 100 ≈ 42.10%.
  8. Q8easyReport

    Which separation is best carried out by steam distillation?

    • ACamphor from sand
    • BGlycerol from spent lye
    • CAniline from an aniline–water mixture
    • DPetrol from crude oil
    Show answer & solution

    Correct answer: (C) Aniline from an aniline–water mixture

    Steam distillation suits compounds that are steam volatile and immiscible with water, such as aniline. Glycerol needs reduced-pressure distillation, camphor sublimation, and crude oil fractional distillation.

Ready to test yourself? Take the 22-question Purification, Characterisation and Basic Principles of Organic Chemistry test →