JEE (Main + Adv) · Chemistry
Electrochemistry
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electrochemistry — quick revision notes
- Nernst equation at 298 K: E = E° − (0.059/n) log Q. For Mⁿ⁺/M, E = E° − (0.059/n) log(1/[Mⁿ⁺]). Hydrogen electrode: E = −0.059 pH.
- ΔG° = −nFE°cell; log K = nE°/0.059 at 298 K; ΔG° = −2.303RT log K. E°cell > 0 (ΔG° < 0) means the reaction is spontaneous under standard conditions; under non-standard conditions, use the sign of E from the Nernst equation.
- Combining half-cell potentials: add the n·E° values (i.e. the ΔG° values), not the E° values. E°(Fe³⁺/Fe) = [2(−0.44) + 0.77]/3 = −0.037 V.
- Conductance: κ = G*/R, where G* = l/A is the cell constant. Λm (S cm² mol⁻¹) = κ × 1000/c (c in mol L⁻¹).
- Strong electrolyte: Λm = Λ°m − A√c. Weak electrolyte: α = Λm/Λ°m and Ka = cα²/(1 − α). On dilution κ decreases and Λm increases.
- Kohlrausch's law: Λ°m = ν₊λ°₊ + ν₋λ°₋. Λ°(HAc) = Λ°(NaAc) + Λ°(HCl) − Λ°(NaCl).
- Faraday's laws: m = ZIt = (M/nF) × It, with 1 F = 96500 C per mole of electrons. For the same charge, m₁/m₂ = E₁/E₂. 1 F liberates 11.2 L of H₂ or 5.6 L of O₂ at STP.
- Cells: dry cell about 1.5 V (Zn/MnO₂, NH₄Cl); mercury cell 1.35 V, constant; lead storage battery, anode Pb + SO₄²⁻ → PbSO₄ + 2e⁻; H₂–O₂ fuel cell, cathode O₂ + 2H₂O + 4e⁻ → 4OH⁻. Rusting cathode: O₂ + 4H⁺ + 4e⁻ → 2H₂O.
Common mistakes to avoid
- Not raising concentrations to their stoichiometric powers in Q, e.g. [Ag⁺]² for Zn + 2Ag⁺, or putting products and reactants the wrong way round.
- Adding or subtracting E° values directly to get a third couple's potential instead of going through ΔG° = −nFE°.
- Forgetting the factor of 1000 (or the units) in Λm = κ × 1000/c, or confusing the cell constant l/A with A/l.
- Assuming aqueous NaCl electrolysis gives Na at the cathode, or O₂ at the anode in brine. The products are H₂ and Cl₂, because of overpotential.
Electrochemistry — solved practice questions
8 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1mediumReport
Calculate the emf at 298 K of the cell Zn | Zn²⁺(0.01 M) || Cu²⁺(1 M) | Cu, given E°cell = 1.10 V. Use 2.303RT/F = 0.059 V.
- A1.16 V
- B1.13 V
- C1.04 V
- D1.10 V
Show answer & solution
Correct answer: (A) 1.16 V
E = E° − (0.059/2) log([Zn²⁺]/[Cu²⁺]) = 1.10 − 0.0295 × log(0.01) = 1.10 + 0.059 = 1.159 V, which is about 1.16 V. - Q2easyReport
What is ΔG° for the Daniell cell reaction, Zn + Cu²⁺ → Zn²⁺ + Cu, given E° = 1.10 V and F = 96500 C mol⁻¹?
- A−212.3 kJ mol⁻¹
- B+212.3 kJ mol⁻¹
- C−424.6 kJ mol⁻¹
- D−106.15 kJ mol⁻¹
Show answer & solution
Correct answer: (A) −212.3 kJ mol⁻¹
ΔG° = −nFE° = −2 × 96500 × 1.10 = −212300 J mol⁻¹ = −212.3 kJ mol⁻¹. - Q3mediumReport
A two-electron cell reaction has E°cell = 0.295 V at 298 K. What is its equilibrium constant? Use 2.303RT/F = 0.059 V.
- A10²⁰
- B10¹⁵
- C10¹⁰
- D10⁵
Show answer & solution
Correct answer: (C) 10¹⁰
log K = nE°/0.059 = 2 × 0.295/0.059 = 10, so K = 10¹⁰. Forgetting n gives 10⁵. - Q4mediumReport
Given Λ°m values (S cm² mol⁻¹): CH₃COONa = 91, HCl = 426, NaCl = 126. What is Λ°m of CH₃COOH?
- A391
- B643
- C261
- D461
Show answer & solution
Correct answer: (A) 391
By Kohlrausch's law, Λ°(CH₃COOH) = Λ°(CH₃COONa) + Λ°(HCl) − Λ°(NaCl) = 91 + 426 − 126 = 391 S cm² mol⁻¹. - Q5hardReport
The molar conductivity of 0.01 M acetic acid is 39.1 S cm² mol⁻¹ and its Λ°m is 391 S cm² mol⁻¹. Using Ka = cα²/(1 − α), what is Ka?
- A1.11 × 10⁻⁶
- B1.11 × 10⁻⁴
- C9.0 × 10⁻³
- D1.11 × 10⁻³
Show answer & solution
Correct answer: (B) 1.11 × 10⁻⁴
α = Λm/Λ°m = 39.1/391 = 0.1. Ka = 0.01 × (0.1)²/(1 − 0.1) = 10⁻⁴/0.9 = 1.11 × 10⁻⁴. - Q6easyReport
The conductivity of 0.1 M KCl solution is 0.0129 S cm⁻¹. What is its molar conductivity?
- A1.29 S cm² mol⁻¹
- B129 S cm² mol⁻¹
- C12.9 S cm² mol⁻¹
- D1290 S cm² mol⁻¹
Show answer & solution
Correct answer: (B) 129 S cm² mol⁻¹
Λm = κ × 1000/c = 0.0129 × 1000/0.1 = 129 S cm² mol⁻¹. - Q7hardReport
A conductivity cell filled with 0.1 M KCl (κ = 0.0129 S cm⁻¹) has a resistance of 100 Ω. Filled with another solution, the same cell has a resistance of 520 Ω. What is the conductivity of the second solution?
- A1.29 × 10⁻² S cm⁻¹
- B4.03 × 10⁻⁴ S cm⁻¹
- C2.48 × 10⁻³ S cm⁻¹
- D6.7 × 10² S cm⁻¹
Show answer & solution
Correct answer: (C) 2.48 × 10⁻³ S cm⁻¹
Cell constant G* = κR = 0.0129 × 100 = 1.29 cm⁻¹. For the second solution, κ = G*/R = 1.29/520 = 2.48 × 10⁻³ S cm⁻¹. - Q8easyReport
A current of 2 A is passed through CuSO₄ solution for 965 s. What mass of copper (atomic mass 63.5) is deposited?
- A1.27 g
- B0.3175 g
- C0.635 g
- D0.0635 g
Show answer & solution
Correct answer: (C) 0.635 g
Q = 2 × 965 = 1930 C = 0.02 F. Since Cu²⁺ + 2e⁻ → Cu, this deposits 0.01 mol, i.e. 0.01 × 63.5 = 0.635 g.
Ready to test yourself? Take the 22-question Electrochemistry test →