JEE (Main + Adv) · Chemistry
Organic Compounds Containing Nitrogen
30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Organic Compounds Containing Nitrogen — quick revision notes
- Basicity in water: methyl series 2° > 1° > 3° > NH₃; ethyl series 2° > 3° > 1° > NH₃. Gas phase: 3° > 2° > 1° > NH₃. Aryl amines are much weaker bases (aniline pKb 9.38).
- For substituted anilines, electron-donating groups raise basicity and electron-withdrawing groups lower it: p-OCH₃ > p-CH₃ > H > p-Cl > p-NO₂.
- Preparation: reduce nitro compounds (Fe/HCl preferred) or nitriles/amides (LiAlH₄); Gabriel synthesis (1° aliphatic only, no aryl amines); Hofmann bromamide RCONH₂ + Br₂ + 4NaOH → RNH₂ (one carbon less, retention of configuration, isocyanate intermediate); RX + CN⁻ then reduction gives one carbon more.
- Tests: carbylamine (CHCl₃/KOH, foul isocyanide) is given by 1° amines only. Hinsberg: 1° gives an alkali-soluble sulphonamide, 2° gives an alkali-insoluble one, 3° does not react.
- With HNO₂: 1° aliphatic amines give an alcohol + N₂ (1 mol N₂ per mol amine). 1° aromatic amines at 273–278 K give ArN₂⁺X⁻, stabilised by resonance.
- Aniline + Br₂ water gives 2,4,6-tribromoaniline. Acetylating first (–NHCOCH₃) allows monosubstitution at para. Direct nitration gives about 47% meta (via anilinium ion). No Friedel–Crafts reaction (salt forms with AlCl₃).
- Diazonium replacements: CuCl/CuBr/CuCN (Sandmeyer), Cu/HX (Gattermann), KI → ArI, HBF₄ then heat → ArF, H₂O warm → ArOH, H₃PO₂ or C₂H₅OH → ArH. Coupling: phenol (pH 9–10) gives orange p-hydroxyazobenzene; aniline (mildly acidic) gives yellow p-aminoazobenzene.
- Isomer counts: C₃H₉N gives 4 amines (2 primary); C₄H₁₁N gives 8 amines (4 primary, 3 secondary, 1 tertiary).
Common mistakes to avoid
- Assuming basicity in water always follows 3° > 2° > 1°. Solvation and steric effects reverse part of the order, and the methyl and ethyl series differ.
- Using Gabriel synthesis for aniline, or forgetting that Hofmann bromamide removes one carbon while the nitrile route adds one.
- Treating benzylamine as an aromatic amine. Its –NH₂ is on an sp³ carbon, so it gives N₂ and an alcohol with HNO₂, not a stable diazonium salt.
- Mixing up Sandmeyer (Cu(I) salts) with Gattermann (Cu powder + HX), or forgetting that iodobenzene needs no copper catalyst.
Organic Compounds Containing Nitrogen — solved practice questions
8 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
The correct order of basic strength of methylamines and ammonia in aqueous solution is:
- A(CH₃)₃N > (CH₃)₂NH > CH₃NH₂ > NH₃
- BCH₃NH₂ > (CH₃)₂NH > (CH₃)₃N > NH₃
- C(CH₃)₂NH > CH₃NH₂ > (CH₃)₃N > NH₃
- DNH₃ > CH₃NH₂ > (CH₃)₂NH > (CH₃)₃N
Show answer & solution
Correct answer: (C) (CH₃)₂NH > CH₃NH₂ > (CH₃)₃N > NH₃
In water, basicity depends on +I effect, solvation of the ammonium ion by H-bonding and steric hindrance together. For methyl groups this gives 2° > 1° > 3° > NH₃ (pKb 3.27, 3.38, 4.22, 4.75). - Q2hardReport
The correct order of basic strength of ethylamines and ammonia in aqueous solution is:
- A(C₂H₅)₂NH > (C₂H₅)₃N > C₂H₅NH₂ > NH₃
- B(C₂H₅)₂NH > C₂H₅NH₂ > (C₂H₅)₃N > NH₃
- CC₂H₅NH₂ > (C₂H₅)₂NH > (C₂H₅)₃N > NH₃
- D(C₂H₅)₃N > (C₂H₅)₂NH > C₂H₅NH₂ > NH₃
Show answer & solution
Correct answer: (A) (C₂H₅)₂NH > (C₂H₅)₃N > C₂H₅NH₂ > NH₃
In water, basicity is the net result of the +I effect, H-bond solvation of the ammonium ion and steric factors. For the ethyl series the balance of these effects gives 2° > 3° > 1° > NH3 (pKb 3.00, 3.25, 3.29, 4.75). The methyl series is different: 2° > 1° > 3°. Learn the two orders separately. - Q3easyReport
Which of the following amines CANNOT be prepared by Gabriel phthalimide synthesis?
- AEthanamine
- BPropan-1-amine
- CPhenylmethanamine (benzylamine)
- DAniline
Show answer & solution
Correct answer: (D) Aniline
Gabriel synthesis needs the phthalimide anion to do an SN2 attack on an alkyl halide. Aryl halides do not undergo this nucleophilic substitution, so aniline cannot be made this way. Benzyl halides react easily. - Q4mediumReport
In the Hofmann bromamide degradation RCONH₂ → RNH₂, the number of moles of NaOH consumed per mole of amide is:
- A1
- B3
- C4
- D2
Show answer & solution
Correct answer: (C) 4
RCONH₂ + Br₂ + 4NaOH → RNH₂ + Na₂CO₃ + 2NaBr + 2H₂O. Balancing Na: 1 Na₂CO₃ (2 Na) plus 2 NaBr (2 Na) gives 4 NaOH. - Q5mediumReport
Diethylamine reacts with Hinsberg's reagent (benzenesulphonyl chloride). The product formed:
- Ais soluble in aqueous KOH because the N–H hydrogen is strongly acidic
- Bis not formed, because secondary amines do not react with Hinsberg's reagent
- Cis insoluble in aqueous KOH because it has no hydrogen on the sulphonamide nitrogen
- Dis an isocyanide with an offensive smell
Show answer & solution
Correct answer: (C) is insoluble in aqueous KOH because it has no hydrogen on the sulphonamide nitrogen
A 2° amine gives N,N-diethylbenzenesulphonamide, which has no H on nitrogen. It cannot form a salt with alkali, so it is insoluble. A 1° amine's sulphonamide has an acidic N–H and dissolves in alkali. 3° amines do not react. - Q6easyReport
Which of the following gives the carbylamine (isocyanide) test when heated with chloroform and alcoholic KOH?
- A(CH₃)₂NH
- B(CH₃)₃N
- CC₆H₅NH₂
- DC₆H₅NHCH₃
Show answer & solution
Correct answer: (C) C₆H₅NH₂
Only primary amines, aliphatic or aromatic, give the foul-smelling isocyanide R–NC with CHCl₃/KOH. Aniline is a primary amine and the others are 2° or 3°. - Q7easyReport
Aniline is treated with bromine water at room temperature. The product is:
- A4-Bromoaniline
- B2,4,6-Tribromoaniline
- C2-Bromoaniline
- D3-Bromoaniline
Show answer & solution
Correct answer: (B) 2,4,6-Tribromoaniline
–NH₂ strongly activates the ring by +R effect, so substitution takes place at both ortho positions and the para position at once. A white precipitate of 2,4,6-tribromoaniline forms. - Q8mediumReport
Direct nitration of aniline with a mixture of conc. HNO₃ and conc. H₂SO₄ gives a substantial amount (about 47%) of m-nitroaniline because:
- Ain strongly acidic medium aniline is protonated to the anilinium ion, which is meta-directing
- Bsteric hindrance blocks the ortho and para positions
- Cthe –NH₂ group is a meta-directing group
- Dthe ring is oxidised to a meta-quinone
Show answer & solution
Correct answer: (A) in strongly acidic medium aniline is protonated to the anilinium ion, which is meta-directing
In strong acid, C₆H₅NH₂ becomes C₆H₅NH₃⁺. The –NH₃⁺ group has no lone pair and withdraws electrons, so it deactivates the ring and directs to the meta position. The products are about 51% p, 47% m and 2% o.
Ready to test yourself? Take the 22-question Organic Compounds Containing Nitrogen test →