JEE (Main + Adv) · Chemistry

Alcohols, Phenols and Ethers

29 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
16
medium
6
hard

Alcohols, Phenols and Ethers — quick revision notes

This chapter covers how alcohols, phenols and ethers are prepared, their physical properties, acidity, and their reactions at the O–H bond, the C–O bond and the aromatic ring, including the named reactions (Reimer–Tiemann, Kolbe, Williamson, cumene process). JEE Main mostly asks for the product of a reaction sequence, the order of acidity or reactivity, distinguishing tests, and short Grignard or stoichiometry numericals.
  • Acidity: carboxylic acid > p-nitrophenol > phenol (pKa ≈ 10) > water > ethanol (pKa ≈ 15.9). Among alcohols, 1° > 2° > 3°. Electron-withdrawing groups at o/p increase phenol acidity; for nitrophenols the order is p > o > m.
  • Lucas test (conc. HCl/ZnCl₂, SN1): 3° alcohols turn turbid immediately, 2° in about 5 min, 1° show no turbidity at room temperature.
  • Hydration of alkenes: H₃O⁺ gives the Markovnikov alcohol. B₂H₆ then H₂O₂/OH⁻ gives the anti-Markovnikov alcohol by syn addition (e.g. 1-methylcyclohexene → trans-2-methylcyclohexanol).
  • Dehydration with conc. H₂SO₄ goes through a carbocation (ease 3° > 2° > 1°), and rearrangements and the Saytzeff product are common. Ethanol gives ethoxyethane at 413 K and ethene at 443 K.
  • Hot Cu at 573 K: 1° alcohol → aldehyde, 2° → ketone, 3° → alkene. PCC stops at the aldehyde, while KMnO₄ or acidified K₂Cr₂O₇ take a 1° alcohol to the acid.
  • Phenol: bromine water gives 2,4,6-tribromophenol; Br₂ in CS₂ gives o/p-monobromophenol; dil. HNO₃ gives o + p nitrophenol (o is steam volatile); Zn dust gives benzene; chromic acid gives p-benzoquinone.
  • Reimer–Tiemann (CHCl₃/NaOH, :CCl₂ electrophile) gives salicylaldehyde. Kolbe (PhONa + CO₂, 400 K, 4–7 atm) gives salicylic acid. The cumene process gives phenol + acetone.
  • Williamson synthesis: RO⁻ + 1° or methyl halide (SN2); a 3° halide gives elimination. Ether + HI: methyl/1° ethers split by SN2 (I⁻ goes to the smaller group), 3° ethers by SN1 (3° iodide), and aryl alkyl ethers give phenol + R–I.

Common mistakes to avoid

  • Making tert-butyl ethers from a tert-butyl halide plus an alkoxide gives the alkene. The alkyl halide must be methyl or 1°.
  • Writing iodobenzene as a product when anisole reacts with HI. The aryl C–O bond is never cleaved, so phenol forms.
  • Forgetting carbocation rearrangement when dehydrating alcohols such as 3,3-dimethylbutan-2-ol, or treating ethanol and dimethyl ether as having different molar masses (both are C₂H₆O).
  • Assuming ortho-nitrophenol is the most acidic nitrophenol. Intramolecular H-bonding makes it slightly less acidic than the para isomer.
Exam tip: For any reaction of an alcohol or ether, first decide whether it goes by SN1, SN2 or a carbocation (check the substrate class and the acid), then apply rearrangement and Saytzeff/Markovnikov rules. Most product-based traps are settled by this one step.

Alcohols, Phenols and Ethers — solved practice questions

7 JEE Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1mediumReport

    Which of the following is the correct order of acidic strength?

    • Ap-Cresol > phenol > p-nitrophenol > ethanol
    • Bp-Nitrophenol > phenol > p-cresol > ethanol
    • CEthanol > phenol > p-cresol > p-nitrophenol
    • DPhenol > p-nitrophenol > ethanol > p-cresol
    Show answer & solution

    Correct answer: (B) p-Nitrophenol > phenol > p-cresol > ethanol

    The –NO₂ group (−I, −R) stabilises the phenoxide ion, and the –CH₃ group (+I, hyperconjugation) destabilises it. The ethoxide ion has no resonance stabilisation, so ethanol is the weakest acid. Order: p-nitrophenol > phenol > p-cresol > ethanol.
  2. Q2easyReport

    Which alcohol gives turbidity immediately with Lucas reagent (conc. HCl + anhydrous ZnCl₂) at room temperature?

    • AButan-1-ol
    • B2-Methylpropan-2-ol
    • CButan-2-ol
    • D2-Methylpropan-1-ol
    Show answer & solution

    Correct answer: (B) 2-Methylpropan-2-ol

    Lucas reagent reacts by an SN1 path. A tertiary alcohol forms a stable 3° carbocation, so the insoluble alkyl chloride appears at once. 2-Methylpropan-2-ol is the only tertiary alcohol here; 2° alcohols take about 5 minutes and 1° alcohols do not react at room temperature.
  3. Q3mediumReport

    In the Reimer–Tiemann reaction of phenol with CHCl₃ and aqueous NaOH, the electrophile that attacks the phenoxide ring is:

    • AFormyl cation, HCO⁺
    • BTrichloromethyl anion, CCl₃⁻
    • CDichloromethyl cation, CHCl₂⁺
    • DDichlorocarbene, :CCl₂
    Show answer & solution

    Correct answer: (D) Dichlorocarbene, :CCl₂

    OH⁻ removes a proton from CHCl₃ to give CCl₃⁻, which loses Cl⁻ to form dichlorocarbene (:CCl₂). This electron-deficient carbene attacks the ortho position of phenoxide. The –CHCl₂ group formed is then hydrolysed to –CHO, giving salicylaldehyde.
  4. Q4easyReport

    Sodium phenoxide is heated with CO₂ at about 400 K and 4–7 atm, and the product is acidified. The major product is:

    • A2-Hydroxybenzaldehyde
    • B4-Hydroxybenzoic acid
    • C2-Hydroxybenzoic acid (salicylic acid)
    • DBenzoic acid
    Show answer & solution

    Correct answer: (C) 2-Hydroxybenzoic acid (salicylic acid)

    This is the Kolbe reaction. Phenoxide is more reactive than phenol towards electrophilic substitution and is attacked by the weak electrophile CO₂, mainly at the ortho position. Acidification gives salicylic acid.
  5. Q5mediumReport

    Which combination gives the best yield of tert-butyl methyl ether by Williamson synthesis?

    • A(CH₃)₃C–ONa + CH₃Br
    • B(CH₃)₃C–Br + CH₃Br with Na in dry ether
    • C(CH₃)₃C–ONa + CH₃CH₂Br
    • D(CH₃)₃C–Br + CH₃ONa
    Show answer & solution

    Correct answer: (A) (CH₃)₃C–ONa + CH₃Br

    Williamson synthesis is SN2, so the alkyl halide should be primary or methyl. A 3° halide with a strong base such as CH₃O⁻ mainly undergoes elimination to give 2-methylpropene. The right choice is tert-butoxide + CH₃Br.
  6. Q6mediumReport

    Anisole (methoxybenzene) is heated with HI. The products are:

    • AIodobenzene and methanol
    • BPhenol and iodomethane
    • C2-Iodophenol and methane
    • DIodobenzene and iodomethane
    Show answer & solution

    Correct answer: (B) Phenol and iodomethane

    The ether oxygen is protonated, and I⁻ attacks the methyl carbon by SN2. The O–C(aryl) bond has partial double-bond character and an sp² carbon, so it is not cleaved. The products are C₆H₅OH + CH₃I, and phenol does not go on to give iodobenzene.
  7. Q7hardReport

    (CH₃)₃C–O–CH₃ reacts with one equivalent of HI. The major products are:

    • A(CH₃)₃C–OH and CH₃I
    • B(CH₃)₂CH–CH₂I and CH₃OH
    • C(CH₃)₃C–I and CH₃I
    • D(CH₃)₃C–I and CH₃OH
    Show answer & solution

    Correct answer: (D) (CH₃)₃C–I and CH₃OH

    After protonation, the C(tertiary)–O bond breaks by SN1 to give the stable tert-butyl carbocation, which combines with I⁻. Methanol leaves. With a methyl/primary + tertiary ether, the tertiary alkyl iodide forms, unlike the SN2 cleavage of methyl primary ethers.

Ready to test yourself? Take the 22-question Alcohols, Phenols and Ethers test →