Class 10 (ICSE) · Physics

Calorimetry and Modern Physics (Radioactivity)

20 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
10
medium
3
hard

Calorimetry and Modern Physics (Radioactivity) — quick revision notes

Calorimetry deals with measuring heat using heat capacity (C' = Q/delta T) and specific heat capacity (c = Q/(m delta T)), and with the principle of method of mixtures: heat lost by the hot body equals heat gained by the cold body. During a change of state such as melting, heat is absorbed as latent heat with no rise in temperature, which explains why ice cools better than water at 0 degree C. Modern physics covers the nucleus (Z and A), spontaneous radioactive decay by alpha, beta and gamma emission, uses and hazards of radioisotopes, and the release of nuclear energy by fission and fusion.
  • Heat capacity C' = Q/delta T (SI unit J/K); specific heat capacity c = Q/(m delta T) (SI unit J kg−1 K−1); C' = m × c.
  • Specific heat capacity of water is about 4200 J kg−1 K−1, nearly twice that of ice (about 2100 J kg−1 K−1) and about ten times that of copper.
  • Method of mixtures: heat lost by hot body = heat gained by cold body (assuming no heat loss to surroundings).
  • High specific heat of water explains moderate coastal climates, its use in hot water bottles and as a coolant, and flooding of fields to protect crops from frost.
  • During melting the temperature stays constant (flat part of the heating curve); specific latent heat of fusion of ice is about 336000 J/kg (336 J/g), SI unit J/kg.
  • Mass number A = protons + neutrons; neutrons = A - Z.
  • Alpha decay: Z decreases by 2 and A by 4; beta decay: Z increases by 1, A unchanged; gamma emission: no change in Z or A.
  • Ionising power: alpha > beta > gamma; penetrating power: gamma > beta > alpha. Gamma rays come from the nucleus, X-rays are produced outside it.
  • Fission: a heavy nucleus (U-235) splits after neutron capture; fusion: light nuclei combine at very high temperature; both release energy from loss of mass.

Common mistakes to avoid

  • Confusing heat capacity (J/K, depends on mass) with specific heat capacity (J kg−1 K−1, property of the material).
  • Thinking temperature rises while ice is melting; heat supplied goes into latent heat at constant 0 degree C.
  • Forgetting that in beta decay the mass number does not change while Z increases by 1.
  • Mixing up ionising and penetrating power order for alpha, beta and gamma.
Exam tip: In every mixture numerical, write 'heat lost = heat gained' first and include the latent heat term for melting ice separately from the heat needed to warm the melted water. For decay questions, balance Z and A on both sides before choosing.

Calorimetry and Modern Physics (Radioactivity) — solved practice questions

5 ICSE 10 Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    What is the SI unit of specific heat capacity?

    • Acal g−1
    • BJ kg−1
    • CJ K−1
    • DJ kg−1 K−1
    Show answer & solution

    Correct answer: (D) J kg−1 K−1

    Specific heat capacity c = Q/(m delta T), so its unit is joule per kilogram per kelvin (J kg−1 K−1). J K−1 is the unit of heat capacity and J kg−1 is the unit of specific latent heat. cal g−1 is not an SI unit.
  2. Q2easyReport

    The heat capacity C' of a body of mass m made of a material of specific heat capacity c is given by:

    • AC' = m + c
    • BC' = m/c
    • CC' = m × c
    • DC' = c/m
    Show answer & solution

    Correct answer: (C) C' = m × c

    Heat capacity C' = Q/delta T and specific heat capacity c = Q/(m delta T). Dividing the two gives C' = m × c, so heat capacity is the specific heat capacity multiplied by the mass.
  3. Q3mediumReport

    How much heat is needed to raise the temperature of 2 kg of water from 25 degree C to 35 degree C? (Specific heat capacity of water = 4200 J kg−1 K−1)

    • A42000 J
    • B84000 J
    • C8400 J
    • D840000 J
    Show answer & solution

    Correct answer: (B) 84000 J

    Q = m c delta T = 2 × 4200 × (35 - 25) = 2 × 4200 × 10 = 84000 J. A rise of 10 degree C is the same as a rise of 10 K.
  4. Q4mediumReport

    100 g of water at 60 degree C is mixed with 200 g of water at 30 degree C. Assuming no heat is lost to the surroundings, what is the final temperature of the mixture?

    • A40 degree C
    • B50 degree C
    • C45 degree C
    • D35 degree C
    Show answer & solution

    Correct answer: (A) 40 degree C

    By the principle of method of mixtures, heat lost = heat gained: 100 × c × (60 - T) = 200 × c × (T - 30). So 6000 - 100T = 200T - 6000, giving 300T = 12000 and T = 40 degree C.
  5. Q5easyReport

    Places near the sea have a moderate climate mainly because:

    • Awater is a good conductor of heat
    • Bwater has a high specific heat capacity
    • Cwater has a low specific heat capacity
    • Dice has a high specific latent heat of fusion
    Show answer & solution

    Correct answer: (B) water has a high specific heat capacity

    Because water has a high specific heat capacity, the sea heats up and cools down much more slowly than the land. It therefore absorbs heat during the day and releases it at night, keeping nearby temperatures moderate.

Ready to test yourself? Take the 15-question Calorimetry and Modern Physics (Radioactivity) test →