Class 10 (ICSE) · Physics

Force, Work, Power and Energy

19 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
9
medium
3
hard

Force, Work, Power and Energy — quick revision notes

A force can move a body along a line (translational motion) or turn it about an axis (rotational motion). The turning effect is the moment of force, and a body is in equilibrium only when both the resultant force and the resultant moment are zero. Work, energy and power are linked through W = FS cos theta and P = W/t, and energy is conserved as it changes from one form to another. Machines such as levers and pulleys trade effort for distance, and their efficiency is eta = MA/VR.
  • Moment of force = force x perpendicular distance of its line of action from the pivot; SI unit N m, cgs unit dyne cm (1 N m = 107 dyne cm).
  • Equilibrium needs zero resultant force (translational) and zero resultant moment (rotational); principle of moments: sum of anticlockwise moments = sum of clockwise moments.
  • In uniform circular motion the speed is constant but the velocity keeps changing direction, so the body accelerates; centripetal force acts towards the centre, while centrifugal force is a fictitious force directed outwards.
  • W = FS cos theta: work is maximum at theta = 0 degrees and zero at theta = 90 degrees; work against gravity W = mgh.
  • 1 erg = 10−7 J, 1 cal = 4.18 J, 1 kWh = 3.6 × 106 J, 1 eV = 1.6 × 10−19 J; 1 hp = 746 W.
  • PE U = mgh and KE K = 1/2 mv2; in free fall (no air resistance) U + K stays constant at every point.
  • MA = L/E, VR = dE/dL, efficiency eta = MA/VR; for practical machines MA < VR because of friction and the weight of moving parts.
  • Levers: Class I fulcrum in between (MA can be >, = or < 1); Class II load in between (MA always > 1); Class III effort in between (MA always < 1, e.g. human forearm).
  • Single fixed pulley: VR = 1 (changes direction of effort only); single movable pulley: VR = 2; block and tackle: VR = total number of pulleys.

Common mistakes to avoid

  • Using the distance from the pivot along the body instead of the perpendicular distance to the line of action when finding a moment.
  • Saying a body in uniform circular motion has no acceleration because its speed is constant.
  • Forgetting to convert minutes to seconds or cm to m in power and moment numericals.
  • Writing efficiency as VR/MA or giving a value above 100% for a practical machine.
Exam tip: In every numerical, write the formula, substitute with SI units and state the unit in the final answer. For lever questions, first locate the fulcrum, load and effort, and then name the class.

Force, Work, Power and Energy — solved practice questions

12 ICSE 10 Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

Take the timed test first

These questions are in the test, so try it before you read the answers below.

Start · 19 questions
  1. Q1easyReport

    What is the SI unit of the moment of a force?

    • Anewton metre (N m)
    • Bnewton square metre (N m2)
    • Cnewton per metre (N/m)
    • Dkilogram metre per second (kg m/s)
    Show answer & solution

    Correct answer: (A) newton metre (N m)

    Moment of force = force x perpendicular distance, so its SI unit is newton x metre = N m. N/m is a unit of spring constant and kg m/s is a unit of momentum.
  2. Q2mediumReport

    How many dyne cm make 1 N m?

    • A103 dyne cm
    • B102 dyne cm
    • C107 dyne cm
    • D105 dyne cm
    Show answer & solution

    Correct answer: (C) 107 dyne cm

    1 N = 105 dyne and 1 m = 102 cm. So 1 N m = 105 × 102 = 107 dyne cm.
  3. Q3easyReport

    A force of 20 N is applied perpendicular to a door at a distance of 0.5 m from the hinges. What is the moment of the force about the hinges?

    • A20.5 N m
    • B0.025 N m
    • C40 N m
    • D10 N m
    Show answer & solution

    Correct answer: (D) 10 N m

    Moment = force x perpendicular distance = 20 N × 0.5 m = 10 N m.
  4. Q4mediumReport

    A uniform metre rule is balanced on a knife edge at its 50 cm mark. A 40 g mass is hung at the 20 cm mark. At which mark must a 60 g mass be hung to keep the rule horizontal?

    • A65 cm mark
    • B70 cm mark
    • C80 cm mark
    • D75 cm mark
    Show answer & solution

    Correct answer: (B) 70 cm mark

    The rule's own weight acts at the pivot and has no moment. Anticlockwise moment = 40 × (50 - 20) = 1200 g cm. For balance, 60 × d = 1200, so d = 20 cm on the other side, which is the 70 cm mark.
  5. Q5easyReport

    A body is in complete equilibrium (no translation, no rotation) when:

    • Aonly the resultant moment on it is zero
    • Bonly the resultant force on it is zero
    • Cthe resultant force on it is zero and the resultant moment about any point is zero
    • Dthe clockwise moments on it are greater than the anticlockwise moments
    Show answer & solution

    Correct answer: (C) the resultant force on it is zero and the resultant moment about any point is zero

    Zero resultant force gives translational equilibrium and zero resultant moment gives rotational equilibrium. Both conditions must hold together for complete equilibrium.
  6. Q6easyReport

    Where is the centre of gravity of a uniform circular ring?

    • AAt any point on the rim of the ring
    • BIt is not defined for a ring
    • CAt the topmost point of the ring
    • DAt the centre of the ring, where there is no material
    Show answer & solution

    Correct answer: (D) At the centre of the ring, where there is no material

    By symmetry, the centre of gravity of a uniform ring is at its geometric centre. This point lies outside the material of the ring, which shows that the centre of gravity need not lie within a body.
  7. Q7easyReport

    For a body in uniform circular motion, which quantity remains constant?

    • ASpeed
    • BAcceleration (as a vector)
    • CDirection of motion
    • DVelocity
    Show answer & solution

    Correct answer: (A) Speed

    In uniform circular motion, the body covers equal distances in equal times, so its speed is constant. The direction of motion keeps changing, so the velocity changes and the body is accelerated towards the centre.
  8. Q8mediumReport

    Which statement about centrifugal force is correct?

    • AIt is a real force directed towards the centre of the circle
    • BIt is a real force acting along the tangent to the circular path
    • CIt is the real force that keeps the body moving in the circular path
    • DIt is a fictitious force directed away from the centre, considered in a rotating frame
    Show answer & solution

    Correct answer: (D) It is a fictitious force directed away from the centre, considered in a rotating frame

    The force towards the centre that keeps a body in a circular path is the centripetal force. Centrifugal force is not a real force; it is a fictitious outward force imagined to explain motion from the rotating frame.
  9. Q9mediumReport

    Assertion (A): The work done by the centripetal force on a body in uniform circular motion is zero. Reason (R): The centripetal force is always perpendicular to the displacement (direction of motion) of the body.

    • AA is false, but R is true
    • BBoth A and R are true, and R is the correct explanation of A
    • CA is true, but R is false
    • DBoth A and R are true, but R is not the correct explanation of A
    Show answer & solution

    Correct answer: (B) Both A and R are true, and R is the correct explanation of A

    Work W = FS cos theta. The centripetal force acts along the radius while the motion is along the tangent, so theta = 90 degrees and cos 90 = 0. Therefore W = 0, and R correctly explains A.
  10. Q10easyReport

    One kilowatt hour (kWh) is equal to:

    • A36 × 106 J
    • B3.6 × 103 J
    • C1000 J
    • D3.6 × 106 J
    Show answer & solution

    Correct answer: (D) 3.6 × 106 J

    1 kWh = 1000 W × 3600 s = 3.6 × 106 J. The kWh is a unit of energy, not of power.
  11. Q11mediumReport

    One electron volt (eV) is equal to:

    • A4.18 J
    • B1.6 × 1019 J
    • C1.6 × 10−19 J
    • D1.6 × 10−12 J
    Show answer & solution

    Correct answer: (C) 1.6 × 10−19 J

    1 eV is the energy gained by an electron accelerated through 1 volt: 1.6 × 10−19 C × 1 V = 1.6 × 10−19 J. The value 1.6 × 10−12 is 1 eV expressed in erg, not joule, and 4.18 J is one calorie.
  12. Q12mediumReport

    A boy of mass 50 kg runs up 20 steps, each 0.2 m high, in 10 s. What power does he develop? (Take g = 10 m/s2)

    • A400 W
    • B200 W
    • C20 W
    • D2000 W
    Show answer & solution

    Correct answer: (B) 200 W

    Height gained h = 20 × 0.2 = 4 m. Work done W = mgh = 50 × 10 × 4 = 2000 J. Power P = W/t = 2000/10 = 200 W.

Want the full set? Practise all 19 Force, Work, Power and Energy questions →