Class 10 (ICSE) · Mathematics

Mensuration and Trigonometry

20 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
10
medium
3
hard

Mensuration and Trigonometry — quick revision notes

This chapter covers the surface area and volume of right circular cylinders, cones, spheres and hemispheres, including hollow solids, cost problems, melting and recasting, and combined solids. In trigonometry you prove and simplify expressions with the three Pythagorean identities and solve 2-D heights-and-distances problems with angles of elevation and depression. Most ICSE questions reward a neat diagram, the right formula and careful unit handling.
  • Cylinder: CSA = 2 pi r h, TSA = 2 pi r(r + h), Volume = pi r2 h.
  • Cone: slant height l = √(r2 + h2), CSA = pi r l, TSA = pi r(l + r), Volume = (1/3) pi r2 h.
  • Sphere: SA = 4 pi r2, Volume = (4/3) pi r3; solid hemisphere: CSA = 2 pi r2, TSA = 3 pi r2, Volume = (2/3) pi r3.
  • Hollow solids: volume of material = outer volume - inner volume, e.g. pipe = pi(R2 - r2)h.
  • Melting and recasting: total volume stays the same; number of small solids = volume of big solid / volume of one small solid.
  • Combined solids: add only the exposed surfaces; the faces that are joined are not counted.
  • Identities: sin2 A + cos2 A = 1, 1 + tan2 A = sec2 A, 1 + cot2 A = cosec2 A; when proving, usually start with the more complicated side.
  • Angle of elevation is measured upwards from the horizontal and angle of depression downwards from the horizontal; the two are equal by alternate angles.
  • With two triangles, write the unknown distances using tan (or cot) in each triangle and then remove the common unknown.

Common mistakes to avoid

  • Using TSA when the question needs CSA (open pipes, painting the walls of a pillar, the curved surface of a toy).
  • Adding the flat circular face where a cone sits on a hemisphere when finding the surface area of the combined solid.
  • Measuring the angle of depression from the vertical line instead of the horizontal.
  • Mixing units, for example radius in cm and height in m, or forgetting that 1 m3 = 1000 litres.
Exam tip: Draw and label a figure for every heights-and-distances or combined-solid question and write the formula before substituting; ICSE awards method marks. Use pi = 22/7 whenever the radius is a multiple of 7.

Mensuration and Trigonometry — solved practice questions

5 ICSE 10 Mathematics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    The curved surface area of a right circular cylinder of radius 7 cm and height 10 cm is (take pi = 22/7):

    • A440 cm2
    • B220 cm2
    • C1540 cm2
    • D748 cm2
    Show answer & solution

    Correct answer: (A) 440 cm2

    CSA = 2 pi r h = 2 × 22/7 × 7 × 10 = 440 cm2. 748 cm2 is the total surface area and 1540 is the volume in cm3.
  2. Q2easyReport

    The volume of a right circular cone of base radius 3 cm and height 7 cm is (take pi = 22/7):

    • A198 cm3
    • B22 cm3
    • C132 cm3
    • D66 cm3
    Show answer & solution

    Correct answer: (D) 66 cm3

    V = (1/3) pi r2 h = (1/3) × 22/7 × 9 × 7 = 66 cm3. 198 cm3 is the volume of a cylinder with the same base and height (the 1/3 is left out).
  3. Q3easyReport

    The surface area of a sphere of radius 7 cm is (take pi = 22/7):

    • A154 cm2
    • B616 cm2
    • C308 cm2
    • D1437.33 cm2
    Show answer & solution

    Correct answer: (B) 616 cm2

    Surface area = 4 pi r2 = 4 × 22/7 × 49 = 616 cm2. 154 cm2 is the area of one great circle and 308 cm2 is the curved surface of a hemisphere.
  4. Q4easyReport

    A right circular cone has base radius 5 cm and vertical height 12 cm. Its slant height is:

    • A√119 cm
    • B13 cm
    • C17 cm
    • D7 cm
    Show answer & solution

    Correct answer: (B) 13 cm

    l = √(r2 + h2) = √(25 + 144) = √169 = 13 cm. Adding or subtracting r and h directly does not give the slant height.
  5. Q5easyReport

    The total surface area of a solid hemisphere of radius r is:

    • A3 pi r2
    • B2 pi r2
    • C4 pi r2
    • D(2/3) pi r3
    Show answer & solution

    Correct answer: (A) 3 pi r2

    A solid hemisphere has a curved surface of 2 pi r2 and a flat circular face of pi r2, so TSA = 3 pi r2. (2/3) pi r3 is its volume, not an area.

Ready to test yourself? Take the 15-question Mensuration and Trigonometry test →